ich habe ein weiteres Problem: wenn ich mein Ubuntu 6.10 (Wirtssystem) neu starte, dann läuft der Server nicht mehr und die Konsole läßt sich nicht starten.
Die Statusabfrage ergibt folgendes:
Code: Alles auswählen
root@idefix:/home/ricklef# /etc/init.d/vmware status
Bridged networking on /dev/vmnet0 is running
Host-only networking on /dev/vmnet1 is running
Bridged networking on /dev/vmnet2 is running
Host-only networking on /dev/vmnet8 is running
NAT networking on /dev/vmnet8 is running
Module vmmon loaded
Module vmnet loaded Ich habe dann den Dienst gestoppt und wieder gestartet (reboot wäre wohl auch gegangen) und dann kommt die Fehlermeldung:
Code: Alles auswählen
root@idefix:/home/ricklef# /etc/init.d/vmware stop
Stopping VMware services:
Virtual machine monitor done
Bridged networking on /dev/vmnet0 done
DHCP server on /dev/vmnet1 done
Host-only networking on /dev/vmnet1 done
Bridged networking on /dev/vmnet2 done
DHCP server on /dev/vmnet8 done
NAT service on /dev/vmnet8 done
Host-only networking on /dev/vmnet8 done
Virtual ethernet done
root@idefix:/home/ricklef# /etc/init.d/vmware start
VMware Server is installed, but it has not been (correctly) configured
for the running kernel. To (re-)configure it, invoke the
following command: /usr/bin/vmware-config.pl.
root@idefix:/home/ricklef# Das erneute Ausführen von vmware-config.pl behebt das Problem:
Code: Alles auswählen
root@idefix:/home/ricklef# /usr/bin/vmware-config.pl
Making sure services for VMware Server are stopped.
Stopping VMware services:
Virtual machine monitor done
Bridged networking on /dev/vmnet0 done
DHCP server on /dev/vmnet1 done
Host-only networking on /dev/vmnet1 done
Bridged networking on /dev/vmnet2 done
DHCP server on /dev/vmnet8 done
NAT service on /dev/vmnet8 done
Host-only networking on /dev/vmnet8 done
Virtual ethernet done
Configuring fallback GTK+ 2.4 libraries.
In which directory do you want to install the mime type icons?
[/usr/share/icons]
What directory contains your desktop menu entry files? These files have a
.desktop file extension. [/usr/share/applications]
In which directory do you want to install the application's icon?
[/usr/share/pixmaps]
/usr/share/applications/vmware-server.desktop: error: Categories values must be one of "Core", "Development", "Building", "Debugger", "IDE", "GUIDesigner", "Profiling", "RevisionControl", "Translation", "Office", "Calendar", "ContactManagement", "Database", "Dictionary", "Chart", "Email", "Finance", "FlowChart", "PDA", "ProjectManagement", "Presentation", "Spreadsheet", "WordProcessor", "Graphics", "2DGraphics", "VectorGraphics", "RasterGraphics", "3DGraphics", "Scanning", "OCR", "Photography", "Viewer", "Settings", "DesktopSettings", "HardwareSettings", "PackageManager", "Network", "Dialup", "InstantMessaging", "IRCClient", "FileTransfer", "HamRadio", "News", "P2P", "RemoteAccess", "Telephony", "WebBrowser", "WebDevelopment", "AudioVideo", "Audio", "Midi", "Mixer", "Sequencer", "Tuner", "Video", "TV", "AudioVideoEditing", "Player", "Recorder", "DiscBurning", "Game", "ActionGame", "AdventureGame", "ArcadeGame", "BoardGame", "BlocksGame", "CardGame", "KidsGame", "LogicGame", "RolePlaying", "Simulation", "SportsGame", "StrategyGame", "Education", "Art", "Construction", "Music", "Languages", "Science", "Astronomy", "Biology", "Chemistry", "Geology", "Math", "MedicalSoftware", "Physics", "Teaching", "Amusement", "Applet", "Archiving", "Electronics", "Emulator", "Engineering", "FileManager", "Shell", "ScreenSaver", "TeminalEmulator", "TrayIcon", "System", "Filesystem", "Monitor", "Security", "Utility", "Accessibility", "Calculator", "Clock", "TextEditor", "KDE", "GNOME", "GTK", "Qt", "Motif", "Java", "ConsoleOnly" (found "Application")
desktop-file-install created an invalid desktop file!
Unable to install the .desktop menu entry file. You must add it to your menus
by hand.
/usr/share/applications/vmware-console-uri-handler.desktop: error: Categories values must be one of "Core", "Development", "Building", "Debugger", "IDE", "GUIDesigner", "Profiling", "RevisionControl", "Translation", "Office", "Calendar", "ContactManagement", "Database", "Dictionary", "Chart", "Email", "Finance", "FlowChart", "PDA", "ProjectManagement", "Presentation", "Spreadsheet", "WordProcessor", "Graphics", "2DGraphics", "VectorGraphics", "RasterGraphics", "3DGraphics", "Scanning", "OCR", "Photography", "Viewer", "Settings", "DesktopSettings", "HardwareSettings", "PackageManager", "Network", "Dialup", "InstantMessaging", "IRCClient", "FileTransfer", "HamRadio", "News", "P2P", "RemoteAccess", "Telephony", "WebBrowser", "WebDevelopment", "AudioVideo", "Audio", "Midi", "Mixer", "Sequencer", "Tuner", "Video", "TV", "AudioVideoEditing", "Player", "Recorder", "DiscBurning", "Game", "ActionGame", "AdventureGame", "ArcadeGame", "BoardGame", "BlocksGame", "CardGame", "KidsGame", "LogicGame", "RolePlaying", "Simulation", "SportsGame", "StrategyGame", "Education", "Art", "Construction", "Music", "Languages", "Science", "Astronomy", "Biology", "Chemistry", "Geology", "Math", "MedicalSoftware", "Physics", "Teaching", "Amusement", "Applet", "Archiving", "Electronics", "Emulator", "Engineering", "FileManager", "Shell", "ScreenSaver", "TeminalEmulator", "TrayIcon", "System", "Filesystem", "Monitor", "Security", "Utility", "Accessibility", "Calculator", "Clock", "TextEditor", "KDE", "GNOME", "GTK", "Qt", "Motif", "Java", "ConsoleOnly" (found "Application")
desktop-file-install created an invalid desktop file!
Unable to install the .desktop menu entry file. You must add it to your menus
by hand.
Trying to find a suitable vmmon module for your running kernel.
None of the pre-built vmmon modules for VMware Server is suitable for your
running kernel. Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.17-11-generic/build/include]
Extracting the sources of the vmmon module.
Building the vmmon module.
Using 2.6.x kernel build system.
make: Gehe in Verzeichnis '/tmp/vmware-config0/vmmon-only'
make -C /lib/modules/2.6.17-11-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Betrete Verzeichnis '/usr/src/linux-headers-2.6.17-11-generic'
CC [M] /tmp/vmware-config0/vmmon-only/linux/driver.o
CC [M] /tmp/vmware-config0/vmmon-only/linux/hostif.o
CC [M] /tmp/vmware-config0/vmmon-only/common/cpuid.o
CC [M] /tmp/vmware-config0/vmmon-only/common/hash.o
CC [M] /tmp/vmware-config0/vmmon-only/common/memtrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/phystrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/task.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmx86.o
CC [M] /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST
CC /tmp/vmware-config0/vmmon-only/vmmon.mod.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.ko
make[1]: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.17-11-generic'
cp -f vmmon.ko ./../vmmon.o
make: Verlasse Verzeichnis '/tmp/vmware-config0/vmmon-only'
The module loads perfectly in the running kernel.
This program previously created the file /dev/vmmon, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/parport0, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/parport1, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/parport2, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/parport3, and was about to remove
it. Somebody else apparently did it already.
You have already setup networking.
Would you like to skip networking setup and keep your old settings as they are?
(yes/no) [no]
Do you want networking for your virtual machines? (yes/no/help) [yes]
This program previously created the file /dev/vmnet3, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/vmnet4, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/vmnet5, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/vmnet6, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/vmnet7, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file /dev/vmnet9, and was about to remove
it. Somebody else apparently did it already.
Would you prefer to modify your existing networking configuration using the
wizard or the editor? (wizard/editor/help) [wizard] no
The answer "no" is invalid. It must be one of "w", "e" or "h".
Would you prefer to modify your existing networking configuration using the
wizard or the editor? (wizard/editor/help) [wizard] w
The following bridged networks have been defined:
. vmnet0 is bridged to eth0
. vmnet2 is bridged to wlan0
All your ethernet interfaces are already bridged.
Do you want to be able to use NAT networking in your virtual machines? (yes/no)
[yes]
Configuring a NAT network for vmnet8.
The NAT network is currently configured to use the private subnet
192.168.41.0/255.255.255.0. Do you want to keep these settings? [yes]
The following NAT networks have been defined:
. vmnet8 is a NAT network on private subnet 192.168.41.0.
Do you wish to configure another NAT network? (yes/no) [no]
Do you want to be able to use host-only networking in your virtual machines?
[yes]
Configuring a host-only network for vmnet1.
The host-only network is currently configured to use the private subnet
192.168.35.0/255.255.255.0. Do you want to keep these settings? [yes]
The following host-only networks have been defined:
. vmnet1 is a host-only network on private subnet 192.168.35.0.
Do you wish to configure another host-only network? (yes/no) [no]
Extracting the sources of the vmnet module.
Building the vmnet module.
Using 2.6.x kernel build system.
make: Gehe in Verzeichnis '/tmp/vmware-config0/vmnet-only'
make -C /lib/modules/2.6.17-11-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Betrete Verzeichnis '/usr/src/linux-headers-2.6.17-11-generic'
CC [M] /tmp/vmware-config0/vmnet-only/driver.o
CC [M] /tmp/vmware-config0/vmnet-only/hub.o
CC [M] /tmp/vmware-config0/vmnet-only/userif.o
CC [M] /tmp/vmware-config0/vmnet-only/netif.o
CC [M] /tmp/vmware-config0/vmnet-only/bridge.o
CC [M] /tmp/vmware-config0/vmnet-only/procfs.o
CC [M] /tmp/vmware-config0/vmnet-only/smac_compat.o
SHIPPED /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST
WARNING: could not find /tmp/vmware-config0/vmnet-only/.smac_linux.x386.o.cmd for /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
CC /tmp/vmware-config0/vmnet-only/vmnet.mod.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.ko
make[1]: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.17-11-generic'
cp -f vmnet.ko ./../vmnet.o
make: Verlasse Verzeichnis '/tmp/vmware-config0/vmnet-only'
The module loads perfectly in the running kernel.
Please specify a port for remote console connections to use [902]
Stopping internet superserver: xinetd.
Starting internet superserver: xinetd.
Configuring the VMware VmPerl Scripting API.
Building the VMware VmPerl Scripting API.
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Installing the VMware VmPerl Scripting API.
The installation of the VMware VmPerl Scripting API succeeded.
Do you want this program to set up permissions for your registered virtual
machines? This will be done by setting new permissions on all files found in
the "/etc/vmware/vm-list" file. [no]
Generating SSL Server Certificate
In which directory do you want to keep your virtual machine files?
[/home/VirtualMachines]
Do you want to enter a serial number now? (yes/no/help) [no]
Starting VMware services:
Virtual machine monitor done
Virtual ethernet done
Bridged networking on /dev/vmnet0 done
Host-only networking on /dev/vmnet1 (background) done
Bridged networking on /dev/vmnet2 done
Host-only networking on /dev/vmnet8 (background) done
NAT service on /dev/vmnet8 done
Starting VMware virtual machines... done
The configuration of VMware Server 1.0.1 build-29996 for Linux for this running
kernel completed successfully.
root@idefix:/home/ricklef#
Man sieht dort, dass ich nochmals in die Netzwerkkonfiguration gegangen bin, das war keine Absicht: zuvor konnte ich mit permanenten Bestätigen durchs Script gehen, beim letzten Mal habe ich aber mein WLAN hinzugefügt und deshalb bin ich wieder durch die Netzwerkkonfiguration durchmarschiert ...
Ich meine, vor ca. 2 Wochen bereits eine Seite beim googlen eines anderen Problems gefunden zu haben, die genau dieses Problem löst, aber ich habe sie mir dummerweise nicht gemerkt und finde sie nicht wieder.
Jemand eine Idee, was ich ändern muß?
gruß ricklef
PS: Falls wichtig, das Gastsystem ist Win XP SP2!