Die Foren-SW läuft ohne erkennbare Probleme. Sollte doch etwas nicht funktionieren, bitte gerne hier jederzeit melden und wir kümmern uns zeitnah darum. Danke!

USB Scanner an VMWare Workstation bringt mich zum Wahnsinn

Hilfe bei Problemen mit der Installation und Benutzung der VMware Workstation und VMware Workstation Pro.

Moderatoren: Dayworker, irix

Antworten
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

USB Scanner an VMWare Workstation bringt mich zum Wahnsinn

Beitragvon kungfu » 20.11.2008, 23:27

Hallo Zusammen,
folgendes Problem, ich nutze Vista 64 Bit als Host System und VM Workstation 6.5 in der aktuellsten Version. Auf der Wokstation habe ich eine Fedora 9 Linuxinstallation ( 32 Bit ) gesetzt. An meinem Computer hängt ein HP DJ F380 Kombigerät welches vom Host aus einwandfrei funktioniert ( speziell der Scanner ). Ich habe noch 3 XP Installationen in der VMWork., auch diese können den Scanner sauber ansprechen.
Nur mein Fedora Linux packt das nicht, teils werden Schane nur halb eingescannt, teils funktioniert die Kommunikation gar nicht und Linux moniert den Scanner als besetzt.

Tja, dachte ich hängt wohl mit Linux und dem bescheidenen hplip rumgrfrickel zusammen........
Von wegen, gerade mal schnell VirtualBox 2.0.4 auf mein Vista installiert, eine Federoinstallation draufgeknallt, alles in Linux genau so konfiguriert wie in der VMWare und siehe da, klappt perfekt, Scanner läuft !
Es muss irgendwas mit dem Zusammenspiel von Linux in der VMWorkstation und den USB Support zu tun haben.

Hat jemand eine Idee ?

Gruss
k. :oops:
Nach oben
Benutzeravatar
UNSTERBLICH(R.I.P.)
Beiträge: 14759
Registriert: 09.08.2003, 05:41
Wohnort: sauerland
Kontaktdaten:
Kontaktdaten von continuum

Beitragvon continuum » 20.11.2008, 23:46

Hast du in der fedora VM dieselben vmx-eintraege wie in den XP-VMs ?
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 21.11.2008, 12:36

EDIT: Habe gerade gesehen das es genau ab heute ein neues Release auf der VMWare Page gibt ....... teste ich nachher und melde mich.

Hi, ich hänge nachher mal beide vmx Dateien ( Windows XP welches funktioniert und Fedora welches nicht funktioniert ) an diesen Thread, setze gerade den Host neu auf :D . Bei einem flüchtigen Blick in die Dateien ist mir nicht viel aufgefallen ( außer das Windows die IDE und Linux die SCSI Treiber für die Platten usw. nutzt ).
Wenn ich jetzt einfach als Gastbetriebssystem Windows XP auswähle und da dann Fedora draufnagel, funktioniert das oder stellt mir VM dann die falschen Gasterweiterungen zur Verfügung ?

Gruss
k. :oops:
Nach oben
Benutzeravatar
UNSTERBLICH(R.I.P.)
Beiträge: 14759
Registriert: 09.08.2003, 05:41
Wohnort: sauerland
Kontaktdaten:
Kontaktdaten von continuum

Beitragvon continuum » 21.11.2008, 13:44

Wenn ich jetzt einfach als Gastbetriebssystem Windows XP auswähle und da dann Fedora draufnagel, funktioniert das oder stellt mir VM dann die falschen Gasterweiterungen zur Verfügung ?


Wenn du als guestOS XP eintraegst dann wird auch das windows.iso eingelegt wenn du die tools installieren willst.
Ich sehe keinen Nutzen darin - poste mal die vmx dann kann ich mal vergleichen
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 22.11.2008, 21:55

Hi,
wie besprochen die vmx unten folgend.
Ist eine komplette Neuinstallation der neuesten VM Workstation, neues Linux drauf und neue Tools installiert. Selbst der Vista64Bit Host ist neu aufgesetzt.
Übrigens, wenn ich vor dem Starten der VM den USB Controller aus den Setting entferne und dann wieder zufüge funktioniert genau EIN Scan unter dem Gastsystem.
Irgendwie irritieren mich die USB Einträge am Ende der Datei ...... Übrigens habe ich GENAU das gleiche Drama mit Suse 11 als Gast.

Übrigens:
>>annotation = "hplip und alle Pakete für cups, sane usw. müssen noch installiert werden." <<
ist noch ein alter Merkzettel, wurde natürlich gemacht ;-).



Gruss
k. :oops:
----------------
vmx
----------------

.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "7"
numvcpus = "2"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "1500"
ide0:0.present = "TRUE"
ide0:0.fileName = "Fedora 10 Festplatte-000001.vmdk"
ide0:1.present = "TRUE"
ide0:1.fileName = "G:"
ide0:1.deviceType = "cdrom-raw"
ide1:0.present = "TRUE"
ide1:0.fileName = "H:"
ide1:0.deviceType = "cdrom-raw"
floppy0.fileName = "A:"
ethernet0.present = "TRUE"
ethernet0.wakeOnPcktRcv = "FALSE"
usb.present = "TRUE"
usb.generic.autoconnect = "FALSE"
ehci.present = "TRUE"
sound.present = "TRUE"
sound.fileName = "Lautsprecher (Realtek High Defi"
mks.enable3d = "TRUE"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
roamingVM.exitBehavior = "go"
displayName = "Fedora 10"
guestOS = "other26xlinux"
nvram = "Fedora 10.nvram"
virtualHW.productCompatibility = "hosted"
ft.secondary0.enabled = "TRUE"
tools.upgrade.policy = "useGlobal"

extendedConfigFile = "Fedora 10.vmxf"

vmi.present = "FALSE"

isolation.tools.hgfs.disable = "FALSE"
sharedFolder0.present = "TRUE"
sharedFolder0.enabled = "TRUE"
sharedFolder0.readAccess = "TRUE"
sharedFolder0.writeAccess = "TRUE"
sharedFolder0.hostPath = "E:\"
sharedFolder0.guestName = "E"
sharedFolder0.expiration = "never"
sharedFolder.maxNum = "1"

svga.autodetect = "FALSE"
svga.maxWidth = "1280"
svga.maxHeight = "1024"
svga.vramSize = "134217728"

ethernet0.addressType = "generated"
uuid.location = "56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88"
uuid.bios = "56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88"
ide0:0.redo = ""
vmotion.checkpointFBSize = "134217728"
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "16"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
sound.pciSlotNumber = "34"
vmi.pciSlotNumber = "-1"
ehci.pciSlotNumber = "36"
vmci0.pciSlotNumber = "37"
ethernet0.generatedAddress = "00:0c:29:80:6c:88"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "-1333760888"
tools.remindInstall = "FALSE"

ide0:1.startConnected = "TRUE"
tools.syncTime = "FALSE"

isolation.tools.vmdebug.disable = "TRUE"
debugStub.allow = "FALSE"
snapshot.action = "keep"

annotation = "hplip und alle Pakete für cups, sane usw. müssen noch installiert werden."

usb.autoConnect.device0 = "path:1/5/1 autoclean:1"
usb:1.present = "TRUE"
usb:1.deviceType = "hub"
Nach oben
Benutzeravatar
UNSTERBLICH(R.I.P.)
Beiträge: 14759
Registriert: 09.08.2003, 05:41
Wohnort: sauerland
Kontaktdaten:
Kontaktdaten von continuum

Beitragvon continuum » 22.11.2008, 23:05

usb.generic.autoconnect = "FALSE"

????????????????????????????????????????????????
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 23.11.2008, 00:38

Hi,
habe das umgestellt, ist nun "True".
Der Scanner scannt teilweise nur halbe Bilder, teilweise gar nicht ( Gerät besetzt ) oder ( I/O Fehler ). Hin und wieder kommt wenigsten eine Voransicht in XSane sauber rein ............
Hier die aktuelle vmx, was bedeutet bei USB Devise am Schluss "hub" ?? Ich habe keinen USB HUB verbaut, eigentlich dürfte er nur den Scanner/Drucker finden, alles andere ist nicht connectet. In meinen alten Windows vmx ist der 6.0 Workstation finde ich auch diesen ominösen ""path:1/5/1 autoclean:1" nicht. Für mich sieht das nach fehlerhafter Kommunikation über den USB Connector aus.

.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "7"
numvcpus = "2"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "1500"
ide0:0.present = "TRUE"
ide0:0.fileName = "Fedora 10 Festplatte-000001.vmdk"
ide0:1.present = "TRUE"
ide0:1.fileName = "G:"
ide0:1.deviceType = "cdrom-raw"
ide1:0.present = "TRUE"
ide1:0.fileName = "H:"
ide1:0.deviceType = "cdrom-raw"
floppy0.fileName = "A:"
ethernet0.present = "TRUE"
ethernet0.wakeOnPcktRcv = "FALSE"
usb.present = "TRUE"
usb.generic.autoconnect = "TRUE"
ehci.present = "TRUE"
sound.present = "TRUE"
sound.fileName = "Lautsprecher (Realtek High Defi"
mks.enable3d = "TRUE"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
roamingVM.exitBehavior = "go"
displayName = "Fedora 10"
guestOS = "other26xlinux"
nvram = "Fedora 10.nvram"
virtualHW.productCompatibility = "hosted"
ft.secondary0.enabled = "TRUE"
tools.upgrade.policy = "useGlobal"

extendedConfigFile = "Fedora 10.vmxf"

vmi.present = "FALSE"

isolation.tools.hgfs.disable = "FALSE"
sharedFolder0.present = "TRUE"
sharedFolder0.enabled = "TRUE"
sharedFolder0.readAccess = "TRUE"
sharedFolder0.writeAccess = "TRUE"
sharedFolder0.hostPath = "E:\"
sharedFolder0.guestName = "E"
sharedFolder0.expiration = "never"
sharedFolder.maxNum = "1"

svga.autodetect = "FALSE"
svga.maxWidth = "1280"
svga.maxHeight = "1024"
svga.vramSize = "134217728"

ethernet0.addressType = "generated"
uuid.location = "56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88"
uuid.bios = "56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88"
ide0:0.redo = ""
vmotion.checkpointFBSize = "134217728"
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "16"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
sound.pciSlotNumber = "34"
vmi.pciSlotNumber = "-1"
ehci.pciSlotNumber = "36"
vmci0.pciSlotNumber = "37"
ethernet0.generatedAddress = "00:0c:29:80:6c:88"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "-1333760888"
tools.remindInstall = "FALSE"

ide0:1.startConnected = "TRUE"
tools.syncTime = "FALSE"

isolation.tools.vmdebug.disable = "TRUE"
debugStub.allow = "FALSE"
snapshot.action = "keep"

annotation = "hplip und alle Pakete für cups, sane usw. müssen noch installiert werden."

usb.autoConnect.device0 = "path:1/5/1 autoclean:1"

usb:1.present = "TRUE"
usb:1.deviceType = "hub"
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 23.11.2008, 00:54

Da man keine Anlagen mehr posten kann kopiere ich Dir noch meine log Datei hier rein..
Da sind wohl einige USB Fehler drinnen. Ich lösche den Log nachher wieder damit das kein 70 cm scroll Thread wird.

Danke und Gruss
k. :oops:

Nov 23 00:27:27.012: vmx| Log for VMware Workstation pid=2132 version=6.5.1 build=build-126130 option=Release
Nov 23 00:27:27.012: vmx| Host codepage=windows-1252 encoding=windows-1252
Nov 23 00:27:27.012: vmx| Hostname=VISTA64BIT
Nov 23 00:27:27.028: vmx| IP=(Unknown)
Nov 23 00:27:27.028: vmx| IP=192.168.178.2
Nov 23 00:27:27.028: vmx| Command line: "C:\Program Files (x86)\VMware\VMware Workstation\x64\vmware-vmx.exe" "-T" "querytoken" "-#" "product=1;name=VMware Workstation;version=6.5.1;buildnumber=126130;licensename=VMware Workstation for Win32;licenseversion=6.0 build-126130;" "-@" "pipe=\\.\pipe\vmxb353deac8b6513d8;" "D:\Fedora 10\Fedora 10.vmx"
Nov 23 00:27:27.028: vmx| Msg_SetLocale: HostLocale=windows-1252 UserLocale=NULL
Nov 23 00:27:27.059: vmx| UI Connecting to pipe '\\.\pipe\vmxb353deac8b6513d8' with user '(null)'
Nov 23 00:27:27.075: vmx| Transitioned vmx/execState/val to poweredOff
Nov 23 00:27:27.075: vmx| HD: host version is 6.0.6001
Nov 23 00:27:27.075: vmx| HD: addr fffff80001d68f90
Nov 23 00:27:27.075: vmx| HD: fffff80001e250e0, 0
Nov 23 00:27:27.075: vmx| VMMon_GetkHzEstimate: Calculated 3339629 kHz
Nov 23 00:27:27.075: vmx| VMMon_RememberkHzEstimate: Calculated 3339629 kHz
Nov 23 00:27:27.090: vmx| CPU # 0 TSC = 5435732096034
Nov 23 00:27:27.090: vmx| CPU # 1 TSC = 5435732096074
Nov 23 00:27:27.090: vmx| TSC delta 40
Nov 23 00:27:27.090: vmx| PTSC: RefClockToTSC 14318180Hz -> 3339629000Hz
Nov 23 00:27:27.090: vmx| PTSC: RefClockToTSC ((x * 3913184293) >> 24)
Nov 23 00:27:27.090: vmx| PTSC: using TSC
Nov 23 00:27:27.090: vmx| CPUID[0] vendor: GenuntelineI
Nov 23 00:27:27.090: vmx| CPUID[0] name: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000000, 0: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000001, 0: 0x000006f2 0x00020800 0x0000e39d 0xbfebfbff
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000002, 0: 0x05b0b101 0x005657f0 0x00000000 0x2cb4307d
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000004, 0: 0x04000121 0x01c0003f 0x0000003f 0x00000001
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000005, 0: 0x00000040 0x00000040 0x00000003 0x00000020
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000006, 0: 0x00000001 0x00000002 0x00000001 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000008, 0: 0x00000400 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 0000000a, 0: 0x07280202 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20000800
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000003, 0: 0x43203229 0x20205550 0x20202020 0x20202020
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000004, 0: 0x30303434 0x20402020 0x30302e32 0x007a4847
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000006, 0: 0x00000000 0x00000000 0x08006040 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[0] level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] vendor: GenuntelineI
Nov 23 00:27:27.090: vmx| CPUID[1] name: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000000, 0: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000001, 0: 0x000006f2 0x01020800 0x0000e39d 0xbfebfbff
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000002, 0: 0x05b0b101 0x005657f0 0x00000000 0x2cb4307d
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000004, 0: 0x04000121 0x01c0003f 0x0000003f 0x00000001
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000005, 0: 0x00000040 0x00000040 0x00000003 0x00000020
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000006, 0: 0x00000001 0x00000002 0x00000001 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000008, 0: 0x00000400 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 0000000a, 0: 0x07280202 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20000800
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000003, 0: 0x43203229 0x20205550 0x20202020 0x20202020
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000004, 0: 0x30303434 0x20402020 0x30302e32 0x007a4847
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000006, 0: 0x00000000 0x00000000 0x08006040 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID[1] level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID vendor: GenuntelineI
Nov 23 00:27:27.090: vmx| hostCPUID name: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz
Nov 23 00:27:27.090: vmx| hostCPUID level 00000000, 0: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
Nov 23 00:27:27.090: vmx| hostCPUID level 00000001, 0: 0x000006f2 0x00020800 0x0000e39d 0xbfebfbff
Nov 23 00:27:27.090: vmx| hostCPUID level 00000002, 0: 0x05b0b101 0x005657f0 0x00000000 0x2cb4307d
Nov 23 00:27:27.090: vmx| hostCPUID level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 00000004, 0: 0x04000121 0x01c0003f 0x0000003f 0x00000001
Nov 23 00:27:27.090: vmx| hostCPUID level 00000005, 0: 0x00000040 0x00000040 0x00000003 0x00000020
Nov 23 00:27:27.090: vmx| hostCPUID level 00000006, 0: 0x00000001 0x00000002 0x00000001 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 00000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 00000008, 0: 0x00000400 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 0000000a, 0: 0x07280202 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20000800
Nov 23 00:27:27.090: vmx| hostCPUID level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
Nov 23 00:27:27.090: vmx| hostCPUID level 80000003, 0: 0x43203229 0x20205550 0x20202020 0x20202020
Nov 23 00:27:27.090: vmx| hostCPUID level 80000004, 0: 0x30303434 0x20402020 0x30302e32 0x007a4847
Nov 23 00:27:27.090: vmx| hostCPUID level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 80000006, 0: 0x00000000 0x00000000 0x08006040 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| hostCPUID level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Nov 23 00:27:27.090: vmx| CPUID Maximum Physical Address Bits supported across all CPUs: 36
Nov 23 00:27:27.090: vmx| Host ACPI: can't find SRAT
Nov 23 00:27:27.090: vmx| Host: SRAT tables not found in memory
Nov 23 00:27:27.309: vmx| ACL_InitCapabilities: current IPC thread
Nov 23 00:27:27.309: vmx| ACL_InitCapabilities: done
Nov 23 00:27:27.309: vmx| changing directory to D:\Fedora 10\.
Nov 23 00:27:27.309: vmx| Config file: D:\Fedora 10\Fedora 10.vmx
Nov 23 00:27:27.340: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Nov 23 00:27:27.387: vmx| VMXVmdbCbVmVmxExecState: Exec state change requested to state poweredOn without reset
Nov 23 00:27:27.387: vmx| PowerOn
Nov 23 00:27:27.387: vmx| VMX_PowerOn: VMX build 126130, UI build 126130
Nov 23 00:27:27.387: vmx| Host: WIN32 highest NUMA node 0
Nov 23 00:27:27.387: vmx| Host: WIN32 NUMA node 0, CPU mask 0x0000000000000003
Nov 23 00:27:27.387: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Nov 23 00:27:27.402: vmx| HOSTINFO: Seeing Intel CPU, numCoresPerCPU 2 numThreadsPerCore 1.
Nov 23 00:27:27.402: vmx| HOSTINFO: This machine has 1 physical CPUS, 2 total cores, and 2 logical CPUs.
Nov 23 00:27:27.402: vmx| HOST Windows version 6.0, build 6001, platform 2, "Service Pack 1", SMP
Nov 23 00:27:27.402: vmx| DICT --- USER PREFERENCES
Nov 23 00:27:27.402: vmx| DICT pref.eula.0.appName = VMware Workstation
Nov 23 00:27:27.402: vmx| DICT pref.eula.0.buildNumber = 126130
Nov 23 00:27:27.402: vmx| DICT pref.mruDest0.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruDest0.destString =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest0.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest1.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruDest1.destString =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest1.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest2.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruDest2.destString =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest2.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest3.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruDest3.destString =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest3.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest4.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruDest4.destString =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest4.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest5.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruDest5.destString =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest5.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest6.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruDest6.destString =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest6.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest7.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruDest7.destString =
Nov 23 00:27:27.402: vmx| DICT pref.mruDest7.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS0.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS0.atsString =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS0.domain =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS0.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS0.secure = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS0.port = 0
Nov 23 00:27:27.402: vmx| DICT pref.mruATS1.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS1.atsString =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS1.domain =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS1.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS1.secure = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS1.port = 0
Nov 23 00:27:27.402: vmx| DICT pref.mruATS2.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS2.atsString =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS2.domain =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS2.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS2.secure = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS2.port = 0
Nov 23 00:27:27.402: vmx| DICT pref.mruATS3.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS3.atsString =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS3.domain =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS3.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS3.secure = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS3.port = 0
Nov 23 00:27:27.402: vmx| DICT pref.mruATS4.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS4.atsString =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS4.domain =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS4.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS4.secure = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS4.port = 0
Nov 23 00:27:27.402: vmx| DICT pref.mruATS5.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS5.atsString =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS5.domain =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS5.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS5.secure = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS5.port = 0
Nov 23 00:27:27.402: vmx| DICT pref.mruATS6.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS6.atsString =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS6.domain =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS6.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS6.secure = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS6.port = 0
Nov 23 00:27:27.402: vmx| DICT pref.mruATS7.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS7.atsString =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS7.domain =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS7.user =
Nov 23 00:27:27.402: vmx| DICT pref.mruATS7.secure = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.mruATS7.port = 0
Nov 23 00:27:27.402: vmx| DICT pref.registrationViewed = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.usbDev.maxDevs = 0
Nov 23 00:27:27.402: vmx| DICT pref.keyboardAndMouse.maxProfiles = 0
Nov 23 00:27:27.402: vmx| DICT webUpdate.failCount = 0
Nov 23 00:27:27.402: vmx| DICT webUpdate.lastCheckTime = 1227375959
Nov 23 00:27:27.402: vmx| DICT pref.placement.left = -80
Nov 23 00:27:27.402: vmx| DICT pref.placement.top = -7
Nov 23 00:27:27.402: vmx| DICT pref.placement.right = 860
Nov 23 00:27:27.402: vmx| DICT pref.placement.bottom = 530
Nov 23 00:27:27.402: vmx| DICT pref.tip.startup = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.tip.index = 1
Nov 23 00:27:27.402: vmx| DICT vmWizard.mode = custom
Nov 23 00:27:27.402: vmx| DICT vmWizard.guestKey = other26xlinux
Nov 23 00:27:27.402: vmx| DICT vmWizard.installMediaType = later
Nov 23 00:27:27.402: vmx| DICT vmWizard.lastPowerOnValue = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.sharedFolder.maxNum = 1
Nov 23 00:27:27.402: vmx| DICT pref.sharedFolder0.vmPath = /vm/#b353deac8b6513d8/
Nov 23 00:27:27.402: vmx| DICT pref.sharedFolder0.guestName = E
Nov 23 00:27:27.402: vmx| DICT pref.sharedFolder0.hostPath = E:\
Nov 23 00:27:27.402: vmx| DICT pref.view.toolbars.list = _SEP_,POWER_OFF,SUSPEND,POWER_ON,RESET,POLICIES,PKG_SETTINGS,NEW_PKG,POCKET_ACE,PREVIEW,SNAPSHOT,REVERT,SNAPSHOT_MANAGER,FAVORITES,QUICK_SWITCH,FULL_SCREEN,UNITY,SUMMARY,APPLIANCE,CONSOLE,QUICK_MINIMIZE,FILE_EXIT,INSTANCE_DETAILS,INSTANCE_REACT,INSTANCE_DEACT,REPLAY_PLAY,REPLAY_RECORD
Nov 23 00:27:27.402: vmx| DICT pref.ws.currentObj.path = /vm/#b353deac8b6513d8/
Nov 23 00:27:27.402: vmx| DICT pref.ws.currentObj.type = vm
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj0.present = TRUE
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj0.name = Home
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj1.present = TRUE
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj1.type = vm
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj1.path = /vm/#b353deac8b6513d8/
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj1.file = D:\Fedora 10\Fedora 10.vmx
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj1.name = Fedora 10
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj.maxNum = 4
Nov 23 00:27:27.402: vmx| DICT pref.sharedFolder0.enabled = FALSE
Nov 23 00:27:27.402: vmx| DICT hint.vmui.showAllUSBDevs = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj2.present = FALSE
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj2.type = home
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj2.path = /vm/#b353deac8b6513d8/
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj2.file = D:\Fedora 10\Fedora 10.vmx
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj2.name = Home
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj3.type = vm
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj3.path = /vm/#b353deac8b6513d8/
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj3.file = D:\Fedora 10\Fedora 10.vmx
Nov 23 00:27:27.402: vmx| DICT pref.ws.openedObj3.name = Fedora 10
Nov 23 00:27:27.402: vmx| DICT hint.usb.generic.stopDevice = FALSE
Nov 23 00:27:27.402: vmx| DICT --- USER DEFAULTS
Nov 23 00:27:27.402: vmx| DICT --- HOST DEFAULTS
Nov 23 00:27:27.402: vmx| DICT prefvmx.useRecommendedLockedMemSize = FALSE
Nov 23 00:27:27.402: vmx| DICT prefvmx.allVMMemoryLimit = 2000
Nov 23 00:27:27.402: vmx| DICT --- SITE DEFAULTS
Nov 23 00:27:27.402: vmx| DICT prefvmx.useRecommendedLockedMemSize = FALSE
Nov 23 00:27:27.402: vmx| DICT prefvmx.allVMMemoryLimit = 2000
Nov 23 00:27:27.402: vmx| DICT --- COMMAND LINE
Nov 23 00:27:27.402: vmx| DICT gui.available = TRUE
Nov 23 00:27:27.402: vmx| DICT --- CONFIGURATION
Nov 23 00:27:27.402: vmx| DICT config.version = 8
Nov 23 00:27:27.402: vmx| DICT virtualHW.version = 7
Nov 23 00:27:27.402: vmx| DICT numvcpus = 2
Nov 23 00:27:27.402: vmx| DICT scsi0.present = TRUE
Nov 23 00:27:27.402: vmx| DICT scsi0.virtualDev = lsilogic
Nov 23 00:27:27.402: vmx| DICT memsize = 1500
Nov 23 00:27:27.402: vmx| DICT ide0:0.present = TRUE
Nov 23 00:27:27.402: vmx| DICT ide0:0.fileName = Fedora 10 Festplatte-000001.vmdk
Nov 23 00:27:27.402: vmx| DICT ide0:1.present = TRUE
Nov 23 00:27:27.402: vmx| DICT ide0:1.fileName = G:
Nov 23 00:27:27.402: vmx| DICT ide0:1.deviceType = cdrom-raw
Nov 23 00:27:27.402: vmx| DICT ide1:0.present = TRUE
Nov 23 00:27:27.402: vmx| DICT ide1:0.fileName = H:
Nov 23 00:27:27.402: vmx| DICT ide1:0.deviceType = cdrom-raw
Nov 23 00:27:27.402: vmx| DICT floppy0.fileName = A:
Nov 23 00:27:27.402: vmx| DICT ethernet0.present = TRUE
Nov 23 00:27:27.402: vmx| DICT ethernet0.wakeOnPcktRcv = FALSE
Nov 23 00:27:27.402: vmx| DICT usb.present = TRUE
Nov 23 00:27:27.402: vmx| DICT usb.generic.autoconnect = TRUE
Nov 23 00:27:27.402: vmx| DICT ehci.present = TRUE
Nov 23 00:27:27.402: vmx| DICT sound.present = TRUE
Nov 23 00:27:27.402: vmx| DICT sound.fileName = Lautsprecher (Realtek High Defi
Nov 23 00:27:27.402: vmx| DICT mks.enable3d = TRUE
Nov 23 00:27:27.402: vmx| DICT pciBridge0.present = TRUE
Nov 23 00:27:27.402: vmx| DICT pciBridge4.present = TRUE
Nov 23 00:27:27.402: vmx| DICT pciBridge4.virtualDev = pcieRootPort
Nov 23 00:27:27.402: vmx| DICT pciBridge4.functions = 8
Nov 23 00:27:27.402: vmx| DICT pciBridge5.present = TRUE
Nov 23 00:27:27.402: vmx| DICT pciBridge5.virtualDev = pcieRootPort
Nov 23 00:27:27.402: vmx| DICT pciBridge5.functions = 8
Nov 23 00:27:27.402: vmx| DICT pciBridge6.present = TRUE
Nov 23 00:27:27.402: vmx| DICT pciBridge6.virtualDev = pcieRootPort
Nov 23 00:27:27.402: vmx| DICT pciBridge6.functions = 8
Nov 23 00:27:27.402: vmx| DICT pciBridge7.present = TRUE
Nov 23 00:27:27.402: vmx| DICT pciBridge7.virtualDev = pcieRootPort
Nov 23 00:27:27.402: vmx| DICT pciBridge7.functions = 8
Nov 23 00:27:27.402: vmx| DICT vmci0.present = TRUE
Nov 23 00:27:27.402: vmx| DICT roamingVM.exitBehavior = go
Nov 23 00:27:27.402: vmx| DICT displayName = Fedora 10
Nov 23 00:27:27.402: vmx| DICT guestOS = other26xlinux
Nov 23 00:27:27.402: vmx| DICT nvram = Fedora 10.nvram
Nov 23 00:27:27.402: vmx| DICT virtualHW.productCompatibility = hosted
Nov 23 00:27:27.402: vmx| DICT ft.secondary0.enabled = TRUE
Nov 23 00:27:27.402: vmx| DICT tools.upgrade.policy = useGlobal
Nov 23 00:27:27.402: vmx| DICT extendedConfigFile = Fedora 10.vmxf
Nov 23 00:27:27.402: vmx| DICT vmi.present = FALSE
Nov 23 00:27:27.402: vmx| DICT isolation.tools.hgfs.disable = FALSE
Nov 23 00:27:27.402: vmx| DICT sharedFolder0.present = TRUE
Nov 23 00:27:27.402: vmx| DICT sharedFolder0.enabled = TRUE
Nov 23 00:27:27.402: vmx| DICT sharedFolder0.readAccess = TRUE
Nov 23 00:27:27.402: vmx| DICT sharedFolder0.writeAccess = TRUE
Nov 23 00:27:27.402: vmx| DICT sharedFolder0.hostPath = E:\
Nov 23 00:27:27.402: vmx| DICT sharedFolder0.guestName = E
Nov 23 00:27:27.402: vmx| DICT sharedFolder0.expiration = never
Nov 23 00:27:27.402: vmx| DICT sharedFolder.maxNum = 1
Nov 23 00:27:27.402: vmx| DICT svga.autodetect = FALSE
Nov 23 00:27:27.402: vmx| DICT svga.maxWidth = 1280
Nov 23 00:27:27.402: vmx| DICT svga.maxHeight = 1024
Nov 23 00:27:27.402: vmx| DICT svga.vramSize = 134217728
Nov 23 00:27:27.402: vmx| DICT ethernet0.addressType = generated
Nov 23 00:27:27.402: vmx| DICT uuid.location = 56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88
Nov 23 00:27:27.402: vmx| DICT uuid.bios = 56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88
Nov 23 00:27:27.402: vmx| DICT ide0:0.redo =
Nov 23 00:27:27.402: vmx| DICT vmotion.checkpointFBSize = 134217728
Nov 23 00:27:27.402: vmx| DICT pciBridge0.pciSlotNumber = 17
Nov 23 00:27:27.402: vmx| DICT pciBridge4.pciSlotNumber = 21
Nov 23 00:27:27.402: vmx| DICT pciBridge5.pciSlotNumber = 22
Nov 23 00:27:27.402: vmx| DICT pciBridge6.pciSlotNumber = 23
Nov 23 00:27:27.402: vmx| DICT pciBridge7.pciSlotNumber = 24
Nov 23 00:27:27.402: vmx| DICT scsi0.pciSlotNumber = 16
Nov 23 00:27:27.402: vmx| DICT usb.pciSlotNumber = 32
Nov 23 00:27:27.402: vmx| DICT ethernet0.pciSlotNumber = 33
Nov 23 00:27:27.402: vmx| DICT sound.pciSlotNumber = 34
Nov 23 00:27:27.402: vmx| DICT vmi.pciSlotNumber = -1
Nov 23 00:27:27.402: vmx| DICT ehci.pciSlotNumber = 36
Nov 23 00:27:27.402: vmx| DICT vmci0.pciSlotNumber = 37
Nov 23 00:27:27.402: vmx| DICT ethernet0.generatedAddress = 00:0c:29:80:6c:88
Nov 23 00:27:27.402: vmx| DICT ethernet0.generatedAddressOffset = 0
Nov 23 00:27:27.402: vmx| DICT vmci0.id = -1333760888
Nov 23 00:27:27.402: vmx| DICT tools.remindInstall = FALSE
Nov 23 00:27:27.402: vmx| DICT ide0:1.startConnected = TRUE
Nov 23 00:27:27.402: vmx| DICT tools.syncTime = FALSE
Nov 23 00:27:27.402: vmx| DICT isolation.tools.vmdebug.disable = TRUE
Nov 23 00:27:27.402: vmx| DICT debugStub.allow = FALSE
Nov 23 00:27:27.402: vmx| DICT snapshot.action = keep
Nov 23 00:27:27.402: vmx| DICT annotation = hplip und alle Pakete für cups, sane usw. müssen noch installiert werden.
Nov 23 00:27:27.402: vmx| DICT usb.autoConnect.device0 = path:1/5/1 autoclean:1
Nov 23 00:27:27.402: vmx| DICT usb:1.present = TRUE
Nov 23 00:27:27.402: vmx| DICT usb:1.deviceType = hub
Nov 23 00:27:27.402: vmx| DICT --- USER DEFAULTS
Nov 23 00:27:27.402: vmx| DICT --- HOST DEFAULTS
Nov 23 00:27:27.402: vmx| DICT prefvmx.useRecommendedLockedMemSize = FALSE
Nov 23 00:27:27.402: vmx| DICT prefvmx.allVMMemoryLimit = 2000
Nov 23 00:27:27.402: vmx| DICT --- SITE DEFAULTS
Nov 23 00:27:27.402: vmx| DICT prefvmx.useRecommendedLockedMemSize = FALSE
Nov 23 00:27:27.402: vmx| DICT prefvmx.allVMMemoryLimit = 2000
Nov 23 00:27:27.402: vmx| DICT --- GLOBAL SETTINGS
Nov 23 00:27:27.402: vmx| hostCpuFeatures = 0x404001dc
Nov 23 00:27:27.402: vmx| hostNumPerfCounters = 2
Nov 23 00:27:27.402: vmx| CPU0: PMC: IA32, CORE 2 [c:1 f:1 e:1]
Nov 23 00:27:27.402: vmx| CPU1: PMC: IA32, CORE 2 [c:1 f:1 e:1]
Nov 23 00:27:27.402: vmx| MONITOR MODE: allowed modes : BT
Nov 23 00:27:27.402: vmx| MONITOR MODE: user requested modes : BT HV HWMMU
Nov 23 00:27:27.402: vmx| MONITOR MODE: guestOS preferred modes: HWMMU BT HV
Nov 23 00:27:27.402: vmx| MONITOR MODE: filtered list : BT
Nov 23 00:27:27.402: vmx| HV Settings: virtual exec = 'software'; virtual mmu = 'software'
Nov 23 00:27:27.418: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Nov 23 00:27:27.418: vmx| WSSCAN: reserved mem (in MB) min=32 max=2944 recommended=2944
Nov 23 00:27:27.418: vmx| WSSCAN: reserved mem (in MB) 2000, min=32 max=2944
Nov 23 00:27:27.418: vmx| PSHARE: scan rate min 16 max 400
Nov 23 00:27:27.418: vmx| WSSCAN: Overhead 418102 paged 32626 nonpaged 32768 maxFBSize
Nov 23 00:27:27.465: vmx| WSSCAN 1 1 503808 589684 512000 584870 50 0
Nov 23 00:27:27.480: vmx| LICENSE using: 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware Workstation\Dormant\License.ws.6.0.200907'
Nov 23 00:27:27.480: vmx| LOG failed to remove stats\stats32-2 failed: Unknown error 3 (0x3)
Nov 23 00:27:27.480: vmx| LOG failed to rename stats\stats32-1 -> stats\stats32-2 failed: Unknown error 3 (0x3)
Nov 23 00:27:27.480: vmx| LOG failed to rename stats\stats32-0 -> stats\stats32-1 failed: Unknown error 3 (0x3)
Nov 23 00:27:27.480: vmx| LOG failed to rename stats\stats32 -> stats\stats32-0 failed: Unknown error 3 (0x3)
Nov 23 00:27:27.480: vmx| LOG failed to remove stats\stats64-2 failed: Unknown error 3 (0x3)
Nov 23 00:27:27.480: vmx| LOG failed to rename stats\stats64-1 -> stats\stats64-2 failed: Unknown error 3 (0x3)
Nov 23 00:27:27.480: vmx| LOG failed to rename stats\stats64-0 -> stats\stats64-1 failed: Unknown error 3 (0x3)
Nov 23 00:27:27.480: vmx| LOG failed to rename stats\stats64 -> stats\stats64-0 failed: Unknown error 3 (0x3)
Nov 23 00:27:27.480: vmx| LOG failed to remove stats32-2 failed: Unknown error 2 (0x2)
Nov 23 00:27:27.480: vmx| LOG failed to remove stats64-2 failed: Unknown error 2 (0x2)
Nov 23 00:27:27.496: vmx| Monitor_PowerOn: hostedVSMPMaxSkew is 1500 us (5009443 cycles)
Nov 23 00:27:27.496: vmx| Monitor_PowerOn: hostedVSMPYieldPoint is 50 us (166981 cycles)
Nov 23 00:27:27.496: vmx| vmm32-modules: [vmm.vmm32 .data:0x2b000-0x728 .sdata:0x2c000-0x4e4 .statvars:0x2d000-0x3a0 .peer:0x2e000-0x261c0 .shared:0x56000-0x12ac0 .bss:0x6a000-0x5c88 .rodata:0x71000-0xb310 .text:0x7d000-0x5906d .kstatvars:0x3000-0x0, mmu-pae.vmm32 .rodata:0x7c310-0x44 .data:0x2b728-0xc .peer:0x541c0-0x16c0 .shared:0x68ac0-0x2c0 .bss:0x6fca0-0x518 .text:0xd6070-0xa4e7 .comment:0x40000d26-0x10e .statvars:0x2000-0x0 .kstatvars:0x2000-0x0 .scb:0x400038a0-0x180 .shared_meta:0x40003c00-0x390 .peer_meta:0x40001020-0x210, sharedmmu-none.vmm32 .text:0xe0558-0x32 .comment:0x40000e34-0x12, pv-none.vmm32 .shared:0x68d80-0x180 .bss:0x701c0-0x84 .text:0xe058c-0xe6 .comment:0x40000e46-0x48 .shared_meta:0x40003f90-0x90, vprobe-none.vmm32 .text:0xe0674-0x79 .comment:0x40000e8e-0x12, hv-none.vmm32 .rodata:0x7c354-0x4 .data:0x1000-0x0 .peer:0x1000-0x0 .shared:0x1000-0x0 .bss:0x1000-0x0 .text:0xe06f0-0x2d .comment:0x40000ea0-0x12 .statvars:0x1000-0x0 .kstatvars:0x1000-0x0, gphys-sw.vmm32 .peer:0x55880-0x40 .shared:0x68f00-0x140 .bss:0x2000-0x0 .text:0xe0720-0xb43 .comment:0x40000eb2-0x12 .scb:0x40003a20-0x60 .shared_meta:0x40004020-0x2a0 .peer_meta:0x40001230-0x60, vassert-none.vmm32 .text:0xe1264-0xf .comment:0x40000ec4-0x12, vmsafe-none.vmm32 .text:0xe1274-0xd .comment:0x40000ed6-0x12, <MonSrcFile> .rodata:0x7c358-0x36c]
Nov 23 00:27:27.496: vmx| KHZEstimate 3339629
Nov 23 00:27:27.496: vmx| MHZEstimate 3340
Nov 23 00:27:27.496: vmx| NumVCPUs 2
Nov 23 00:27:27.496: vmx| PShare: enabled 1, scanRate 32, checkRate 16
Nov 23 00:27:27.496: vmx| UUID: location-UUID is 56 4d 67 d8 91 ad d2 00-56 34 7b 59 2e 96 c1 12
Nov 23 00:27:27.496: vmx| UUID: location-UUID is 56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88
Nov 23 00:27:27.496: vmx| UUID: location-UUID is 56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88
Nov 23 00:27:27.496: vmx| AIOGNRC: numThreads=5 ide=1, scsi=0, passthru=2
Nov 23 00:27:27.496: vmx| WORKER: Creating new group with numThreads=5 (5)
Nov 23 00:27:27.496: vmx| Replay State = 0
Nov 23 00:27:27.496: vmx| minDEThreshold: 70
Nov 23 00:27:27.496: vmx| MM: Using partialmap, 384000 pages AC 0 CE 1 TM 0 DOHU 0
Nov 23 00:27:27.496: vmx| UUID: location-UUID is 56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88
Nov 23 00:27:27.496: vmx| MM: using 'D:\Fedora 10\564d0b55-4bc1-4a4a-23f8-245fb0806c88.vmem' as a paging file
Nov 23 00:27:27.496: vmx| Opened paging file D:\Fedora 10\564d0b55-4bc1-4a4a-23f8-245fb0806c88.vmem
Nov 23 00:27:27.543: vmx| Mapped mainmem as pageable
Nov 23 00:27:27.543: vmx| MMCHK: Disabling checks which are not forced, cannot do checks on certain processors.
Nov 23 00:27:27.543: vmx| MStat: Creating Stat vm.uptime
Nov 23 00:27:27.543: vmx| MStat: Creating Stat vm.suspendTime
Nov 23 00:27:27.543: vmx| MStat: Creating Stat vm.powerOnTimeStamp
Nov 23 00:27:27.543: vmx| VMXAIOMGR: Using: simple=Generic unbuf=Compl
Nov 23 00:27:27.543: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Nov 23 00:27:27.558: vmx| DISK: OPEN ide0:0 'D:\Fedora 10\Fedora 10 Festplatte-000001.vmdk' persistent R[]
Nov 23 00:27:27.699: vmx| DISKLIB-DSCPTR: Opened [0]: "Fedora 10 Festplatte-000001.vmdk" (0xa)
Nov 23 00:27:27.699: vmx| DISKLIB-LINK : Opened 'D:\Fedora 10\Fedora 10 Festplatte-000001.vmdk' (0xa): monolithicSparse, 31457280 sectors / 15 GB.
Nov 23 00:27:27.855: vmx| DISKLIB-DSCPTR: Opened [0]: "Fedora 10 Festplatte-flat.vmdk" 0 (0xe)
Nov 23 00:27:27.855: vmx| DISKLIB-LINK : Opened 'D:\Fedora 10\Fedora 10 Festplatte.vmdk' (0xe): monolithicFlat, 31457280 sectors / 15 GB.
Nov 23 00:27:27.855: vmx| DISKLIB-LIB : Opened "D:\Fedora 10\Fedora 10 Festplatte-000001.vmdk" (flags 0xa).
Nov 23 00:27:27.855: vmx| DiskGetGeometry: Reading of disk partition table
Nov 23 00:27:27.855: vmx| DISK: OPEN 'D:\Fedora 10\Fedora 10 Festplatte-000001.vmdk' Geo (16383/16/63) BIOS Geo (1958/255/63) freeSpace=12416 MB, ide
Nov 23 00:27:27.855: vmx| TimeTracker host to guest rate conversion 5438315453504 @ 3339629000Hz -> 5438315453504 @ 3339629000Hz
Nov 23 00:27:27.855: vmx| TimeTracker host to guest rate conversion ((x * 2147483648) >> 31) + 0
Nov 23 00:27:27.855: vmx| USB: Search for USB devices to connect [path:1/5/1 autoclean:1]
Nov 23 00:27:27.855: vmx| USB: Initializing 'Generic' backend
Nov 23 00:27:27.855: vmx| USBGW: Connected to HCMON version 3.0
Nov 23 00:27:27.855: vmx| USB: Initializing 'Virtual Hub' backend
Nov 23 00:27:27.855: vmx| USB: Initializing 'Virtual Mouse' backend
Nov 23 00:27:27.855: vmx| USB: Initializing 'Virtual Keyboard' backend
Nov 23 00:27:27.855: vmx| USB: Initializing 'Virtual Mass Storage' backend
Nov 23 00:27:27.855: vmx| USB: Initializing 'Virtual CCID' backend
Nov 23 00:27:27.855: vmx| USB-CCID: Could not establish resource manager context for card ops: SCARD_E_NO_SERVICE(0x8010001d).
Nov 23 00:27:27.855: vmx| USB: Unable to initialize 'Virtual CCID' backend
Nov 23 00:27:27.995: vmx| USBGW: Skipping disk backing for file (D:\Fedora 10\Fedora 10.vmx).
Nov 23 00:27:27.995: vmx| USBGW: Skipping disk backing for file (D:\Fedora 10\Fedora 10 Festplatte-000001.vmdk).
Nov 23 00:27:27.995: vmx| USBGW: Skipping disk backing for file (D:\Fedora 10\Fedora 10 Festplatte.vmdk).
Nov 23 00:27:27.995: vmx| USBGW: Skipping disk backing for file (D:\Fedora 10\Fedora 10 Festplatte.vmdk).
Nov 23 00:27:27.995: vmx| USBGW: Skipping disk backing for file (D:\Fedora 10\Fedora 10-Snapshot1.vmem).
Nov 23 00:27:27.995: vmx| USBGW: Skipping disk backing for file (D:\Fedora 10\Fedora 10-Snapshot1.vmsn).
Nov 23 00:27:28.026: vmx| WORKER: Creating new group with numThreads=1 (6)
Nov 23 00:27:28.026: vmx| MKS REMOTE Loading VNC Configuration from VM config file
Nov 23 00:27:28.042: vmx| VLANCE: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks
Nov 23 00:27:28.042: vmx| VMXNET: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks, dontClusterSize is 128
Nov 23 00:27:28.042: vmx| NetPkt: checksum cycles/kB: C=75 asm1=823 asm2=422
Nov 23 00:27:28.042: vmx| NetPkt: copy and sum cycles/kB: C=530 asm1=863 asm2=463
Nov 23 00:27:28.042: vmx| Chipset version: 0x13
Nov 23 00:27:28.042: vmx| DISKUTIL: ide0:0 : capacity=31457280
Nov 23 00:27:28.042: vmx| DISKUTIL: ide0:0 : capacity=31457280
Nov 23 00:27:28.042: vmx| DISKUTIL: ide0:0 : geometry=1958/255/63
Nov 23 00:27:28.042: vmx| DISKUTIL: ide0:1 : capacity=0
Nov 23 00:27:28.042: vmx| DISKUTIL: ide0:1 : geometry=0/0/0
Nov 23 00:27:28.042: vmx| DISKUTIL: ide1:0 : capacity=0
Nov 23 00:27:28.042: vmx| DISKUTIL: ide1:0 : geometry=0/0/0
Nov 23 00:27:28.042: vmx| SCSI0: UNTAGGED commands will be converted to ORDER tags.
Nov 23 00:27:28.042: vmx| SVGA: Advertising 3D acceleration.
Nov 23 00:27:28.042: vmx| USB: Initializing 'UHCI' host controller
Nov 23 00:27:28.042: vmx| Ethernet0 MAC Address: 00:0c:29:80:6c:88
Nov 23 00:27:28.073: vmx| USB: Initializing 'EHCI' host controller
Nov 23 00:27:28.073: vmx| MStat: Creating Stat vm.heartbeat
Nov 23 00:27:28.073: vmx| DISKUTIL: ide0:0 : toolsVersion = 7428
Nov 23 00:27:28.073: vmx| TOOLS INSTALL initializing state to IDLE on power on.
Nov 23 00:27:28.073: vmx| PTSC to VMI Wallclock (nsec) 5439042507344 @ 3339629000Hz -> 1227396448000000000 @ 1000000000Hz
Nov 23 00:27:28.073: vmx| PTSC to VMI Wallclock (nsec) ((x * 2572122410) >> 33) + 1227394819363254022
Nov 23 00:27:28.073: vmx| PTSC to ParaTime RealCycles 0 @ 3339629000Hz -> 0 @ 3339629000Hz
Nov 23 00:27:28.073: vmx| PTSC to ParaTime RealCycles ((x * 1) >> 0) + 0
Nov 23 00:27:28.073: vmx| ParaTime RealCycles to PTSC 0 @ 3339629000Hz -> 0 @ 3339629000Hz
Nov 23 00:27:28.073: vmx| ParaTime RealCycles to PTSC ((x * 1) >> 0) + 0
Nov 23 00:27:28.073: vmx| memoryHotplug: Current size = 1500MB, Minimum size = 1500MB, Maximum size = 1500MB
Nov 23 00:27:28.073: vmx| memoryHotplug: Entry[0]: 00000000000000A0-00000000000A0000
Nov 23 00:27:28.073: vmx| memoryHotplug: Entry[1]: 00000000001000A0-000000005DC00000
Nov 23 00:27:28.073: vmx| RDEBUG: vmdebug driver is disabled!
Nov 23 00:27:28.073: vmx| guestCpuFeatures = 0x404001d8
Nov 23 00:27:28.073: vmx| guestCPUID vendor: GenuntelineI
Nov 23 00:27:28.073: vmx| guestCPUID name: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz
Nov 23 00:27:28.073: vmx| guestCPUID level 00000000, 0: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
Nov 23 00:27:28.073: vmx| guestCPUID level 00000001, 0: 0x000006f2 0x00010800 0x80000201 0x0febfbff
Nov 23 00:27:28.073: vmx| guestCPUID level 00000002, 0: 0x05b0b101 0x005657f0 0x00000000 0x2cb4307d
Nov 23 00:27:28.073: vmx| guestCPUID level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 00000004, 0: 0x04000121 0x01c0003f 0x0000003f 0x00000001
Nov 23 00:27:28.073: vmx| guestCPUID level 00000005, 0: 0x00000040 0x00000040 0x00000003 0x00000020
Nov 23 00:27:28.073: vmx| guestCPUID level 00000006, 0: 0x00000001 0x00000002 0x00000001 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 00000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 00000008, 0: 0x00000400 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 0000000a, 0: 0x07280202 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 40000000, 0: 0x40000010 0x61774d56 0x4d566572 0x65726177
Nov 23 00:27:28.073: vmx| guestCPUID level 40000010, 0: 0x0032f56d 0x000101d0 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 80000001, 0: 0x00000000 0x00000000 0x00000000 0x00000800
Nov 23 00:27:28.073: vmx| guestCPUID level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
Nov 23 00:27:28.073: vmx| guestCPUID level 80000003, 0: 0x43203229 0x20205550 0x20202020 0x20202020
Nov 23 00:27:28.073: vmx| guestCPUID level 80000004, 0: 0x30303434 0x20402020 0x30302e32 0x007a4847
Nov 23 00:27:28.073: vmx| guestCPUID level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 80000006, 0: 0x00000000 0x00000000 0x08006040 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.073: vmx| guestCPUID level 80000008, 0: 0x00003028 0x00000000 0x00000000 0x00000000
Nov 23 00:27:28.089: vmx| BusMemSample: initPercent 75 touched 288000
Nov 23 00:27:28.089: vmx| TOOLS received request in VMX to set option 'enableDnD' -> '1'
Nov 23 00:27:28.089: vmx| TOOLS received request in VMX to set option 'copypaste' -> '1'
Nov 23 00:27:28.104: vmx| VMX_PowerOn: ModuleTable_PowerOn = 1
Nov 23 00:27:28.104: vmx| VMX setting maximum IPC write buffers to 0 packets, 0 bytes
Nov 23 00:27:28.104: mks| Async MKS thread is alive
Nov 23 00:27:28.292: vmx| DnDRegisterRpc: DnD rpc already set to 1
Nov 23 00:27:28.292: vmx| CopyPasteRegisterRpc: already set to 1
Nov 23 00:27:28.292: vcpu-0| APIC: version = 0x14, max LVT = 5
Nov 23 00:27:28.292: vcpu-0| APIC: LDR = 0x1000000, DFR = 0xffffffff
Nov 23 00:27:28.354: vcpu-0| guestCpuFeatures = 0x404001d8
Nov 23 00:27:28.370: vcpu-0| CPU reset: hard
Nov 23 00:27:28.370: vcpu-0| memoryHotplug: Entry[0]: 00000000000000A0-00000000000A0000
Nov 23 00:27:28.370: vcpu-0| memoryHotplug: Entry[1]: 00000000001000A0-000000005DC00000
Nov 23 00:27:28.402: vcpu-0| SOUND 001.677048 PCISoundWin32 mixerGetLineInfo error 1
Nov 23 00:27:28.402: vcpu-0| Msg_Post: Warning
Nov 23 00:27:28.402: vcpu-0| [msg.vnet.bridgeDown] The network bridge on device VMnet0 is temporarily down because the bridged Ethernet interface is down. The virtual machine may not be able to communicate with the host or with other machines on your network.
Nov 23 00:27:28.402: vcpu-0| ----------------------------------------
Nov 23 00:27:28.511: vcpu-0| VNET: Notification enabled for Ethernet0
Nov 23 00:27:29.619: vcpu-0| CDROM: Connecting ide1:0 to 'H:'. img=0 raw=1 remote=0
Nov 23 00:27:29.634: vcpu-0| CDROM: Connecting ide0:1 to 'G:'. img=0 raw=1 remote=0
Nov 23 00:27:29.650: vcpu-0| Transitioned vmx/execState/val to poweredOn
Nov 23 00:27:29.681: mks| Connecting to window system.
Nov 23 00:27:29.681: mks| KHBKL: Unable to parse keystring at: ''
Nov 23 00:27:29.728: mks| GdiBackendConstruct: Using software emulation for overlays.
Nov 23 00:27:29.728: mks| Ignoring update request in VGA_Expose (mode change pending).
Nov 23 00:27:29.728: mks| VMXAIOMGR: Disallowing USB connect. 2992733 us since last reopen
Nov 23 00:27:29.728: mks| Ignoring update request in VGA_Expose (mode change pending).
Nov 23 00:27:29.743: vcpu-0| sz=2977760
Nov 23 00:27:29.743: vcpu-1| APIC: version = 0x14, max LVT = 5
Nov 23 00:27:29.743: vcpu-1| APIC: LDR = 0x2000000, DFR = 0xffffffff
Nov 23 00:27:29.821: vcpu-1| guestCpuFeatures = 0x404001d8
Nov 23 00:27:29.821: vcpu-1| CPU reset: hard
Nov 23 00:27:29.837: vcpu-1| sz=2977760
Nov 23 00:27:29.837: vcpu-1| vmm32 initialized: Releasebuild-126130. cflags: 0x00000008.00040280.03418080.00002800
Nov 23 00:27:29.837: vcpu-0| vmm32 initialized: Releasebuild-126130. cflags: 0x00000008.00040280.03418080.00002800
Nov 23 00:27:29.868: vcpu-0| MonitorInitNumaUnmapVMM32
Nov 23 00:27:29.915: vmx| USB: Autoconnecting device "Hewlett-Packard USB-Verbundgerät" matching pattern [path:1/5/1 autoclean:1]
Nov 23 00:27:29.915: vmx| USB: Connecting device 0x500000103f05511
Nov 23 00:27:29.915: vmx| Msg_Hint: msg.usb.generic.stopDevice (sent)
Nov 23 00:27:29.915: vmx| A USB device is about to be unplugged from the host and connected to this virtual machine. It will first be stopped to enable safe removal. With some devices, the host may display the message "The device can now safely be removed."
Nov 23 00:27:29.915: vmx| ---------------------------------------
Nov 23 00:27:29.915: vmx| VMXVmdbLoadUsbDevices: New set of 2 USB devices
Nov 23 00:27:29.915: vmx| USB: Found device [name:Hewlett-Packard\ USB-Verbundgerät vid:03f0 pid:5511 path:1/5/1 speed:full family:vendor,printer autoclean:1]
Nov 23 00:27:29.915: vmx| USB: Found device [name:AVM\ FRITZ!WLAN\ USB\ Stick\ v1.1 vid:057c pid:6201 path:1/7/3 speed:high family:vendor]
Nov 23 00:27:30.102: vcpu-1| CPU reset: soft
Nov 23 00:27:30.457: vmx| USBG: CONNREQ: Dequeued head request after 557 ms for [name:Hewlett-Packard\ USB-Verbundgerät vid:03f0 pid:5511 path:1/5/1 speed:full family:vendor,printer autoclean:1]
Nov 23 00:27:30.457: vmx| USB: Device [name:Hewlett-Packard\ USB-Verbundgerät vid:03f0 pid:5511 path:1/5/1 speed:full family:vendor,printer] should already be connected
Nov 23 00:27:30.457: vmx| VMXVmdbLoadUsbDevices: New set of 2 USB devices
Nov 23 00:27:30.457: vmx| USB: Found device [name:Hewlett-Packard\ USB-Verbundgerät vid:03f0 pid:5511 path:1/5/1 speed:full family:vendor,printer]
Nov 23 00:27:30.457: vmx| USB: Found device [name:AVM\ FRITZ!WLAN\ USB\ Stick\ v1.1 vid:057c pid:6201 path:1/7/3 speed:high family:vendor]
Nov 23 00:27:30.579: vcpu-0| SVGA: Registering MemSpace at 0xd0000000(0x0) and 0xd8000000(0x0)
Nov 23 00:27:30.584: vcpu-0| SVGA: Unregistering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Nov 23 00:27:30.749: vcpu-0| SVGA: Registering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Nov 23 00:27:30.755: vcpu-0| SVGA: Unregistering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Nov 23 00:27:30.779: vcpu-0| SVGA: Registering IOSpace at 0x10d0
Nov 23 00:27:30.779: vcpu-0| SVGA: Registering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Nov 23 00:27:30.785: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.786: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.787: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.788: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.789: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.791: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.792: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.793: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.794: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.795: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.796: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.797: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.799: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.800: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.801: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.802: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.803: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.804: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.806: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.807: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.808: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.809: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.810: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.811: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.812: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.814: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.815: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.816: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.817: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.818: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.819: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.820: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:30.822: vcpu-1| CPU reset: soft
Nov 23 00:27:30.979: mks| Ignoring update request in VGA_Expose (mode change pending).
Nov 23 00:27:30.993: mks| Ignoring update request in VGA_Expose (mode change pending).
Nov 23 00:27:31.022: vcpu-0| SIO: Skipping bogus enable for COM1
Nov 23 00:27:31.023: vcpu-0| SIO: Skipping bogus enable for COM2
Nov 23 00:27:31.040: vcpu-0| CDROM-WIN: 'G:' Length 24 MaxTransferLength 131072 MaxPhysPages 33
Nov 23 00:27:31.040: vcpu-0| CDROM-WIN: AlignMask 0x1 !AsyncEvent TaggedQ ScanUp DMA
Nov 23 00:27:31.055: vcpu-0| CDROM-WIN: 'H:' Length 24 MaxTransferLength 131072 MaxPhysPages 33
Nov 23 00:27:31.055: vcpu-0| CDROM-WIN: AlignMask 0x1 !AsyncEvent TaggedQ ScanUp DMA
Nov 23 00:27:31.072: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.073: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.075: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.077: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.078: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.079: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.080: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.081: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.083: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.084: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.085: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.086: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.087: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.088: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.090: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.091: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.092: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.093: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.094: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.095: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.096: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.098: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.099: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.100: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.101: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.102: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.103: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.104: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.106: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.107: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.108: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.109: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:31.118: vcpu-0| SCSI0: RESET BUS
Nov 23 00:27:31.160: vcpu-0| VIDE: Curr CHS info cyls: 17475 heads: 15 sects: 63 lba_cap: 31457280
Nov 23 00:27:31.167: vcpu-1| CPU reset: soft
Nov 23 00:27:31.189: vcpu-0| BIOS-UUID is 56 4d 0b 55 4b c1 4a 4a-23 f8 24 5f b0 80 6c 88
Nov 23 00:27:31.515: mks| Ignoring update request in VGA_Expose (mode change pending).
Nov 23 00:27:31.983: vmx| USB: Device [name:Hewlett-Packard\ USB-Verbundgerät vid:03f0 pid:5511 path:1/5/1 speed:full family:vendor,printer] should already be connected
Nov 23 00:27:32.201: vcpu-0| VIDE: Curr CHS info cyls: 17475 heads: 15 sects: 63 lba_cap: 31457280
Nov 23 00:27:32.201: vcpu-0| VIDE: Already in check condition 02 3a 00
Nov 23 00:27:32.201: vcpu-0| VIDE: Already in check condition 02 3a 00
Nov 23 00:27:32.342: mks| Ignoring update request in VGA_Expose (mode change pending).
Nov 23 00:27:32.389: mks| Ignoring update request in VGA_Expose (mode change pending).
Nov 23 00:27:34.004: vcpu-1| CPU reset: soft
Nov 23 00:27:34.271: vcpu-0| SVGA: Unregistering IOSpace at 0x10d0
Nov 23 00:27:34.271: vcpu-0| SVGA: Registering IOSpace at 0xfffffff0
Nov 23 00:27:34.271: vcpu-0| SVGA: Unregistering IOSpace at 0xfffffff0
Nov 23 00:27:34.271: vcpu-0| SVGA: Registering IOSpace at 0x10d0
Nov 23 00:27:34.291: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.292: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.292: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.292: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.292: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.292: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.292: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.293: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.293: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.293: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.293: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.293: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.293: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.294: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.294: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.294: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.294: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.295: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.295: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.295: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.295: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.295: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.295: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.296: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.296: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.296: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.296: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.296: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.297: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.297: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.297: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.297: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.297: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.298: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.298: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.298: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.298: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.298: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.298: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.299: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.299: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.299: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.299: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.300: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.300: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.300: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.300: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.300: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.300: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.301: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.301: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.301: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.301: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.301: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.301: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.302: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.302: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.302: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.302: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.303: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.304: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.305: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.874: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.875: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.876: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:34.877: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Nov 23 00:27:35.230: vcpu-1| UHCI: HCReset
Nov 23 00:27:35.754: mks| SVGA: display status changed, using optimizations for local consoles.
Nov 23 00:27:36.840: vcpu-0| UHCI: HCReset
Nov 23 00:27:37.045: vcpu-0| USBG warning: can't reset port usbioerr 'NOT_CONFIGURED'
Nov 23 00:27:38.253: mks| MKSHostOps_Exit3D: 0, 1
Nov 23 00:27:38.348: vcpu-0| USBG warning: can't reset port usbioerr 'NOT_CONFIGURED'
Nov 23 00:27:57.391: vcpu-0| SCSI0: RESET BUS
Nov 23 00:27:57.488: vcpu-1| SCSI0: RESET BUS
Nov 23 00:27:57.493: vcpu-1| Msg_Post: Warning
Nov 23 00:27:57.493: vcpu-1| [msg.vnet.bridgeDown] The network bridge on device VMnet0 is temporarily down because the bridged Ethernet interface is down. The virtual machine may not be able to communicate with the host or with other machines on your network.
Nov 23 00:27:57.493: vcpu-1| ----------------------------------------
Nov 23 00:27:57.504: vcpu-1| VNET: Notification enabled for Ethernet0
Nov 23 00:27:58.890: vcpu-1| SOUND 032.181930 PCISoundWin32 mixerGetLineInfo error 1024
Nov 23 00:28:07.688: vcpu-1| GuestRpc: Channel 1, guest application toolbox.
Nov 23 00:28:07.690: vcpu-1| TOOLS autoupgrade protocol version 2
Nov 23 00:28:07.694: vcpu-1| TOOLS ToolsCapabilityGuestTempDirectory received 1 /tmp/vmware-root
Nov 23 00:28:07.695: vcpu-1| TOOLS ToolsCapabilityGuestConfDirectory received /etc/vmware-tools
Nov 23 00:28:07.696: vcpu-1| TOOLS setting the tools version to '7428'
Nov 23 00:28:07.941: vcpu-1| Guest: toolbox: Version: build-126130
Nov 23 00:28:07.941: vcpu-1| TOOLS unified loop capability requested by 'toolbox'; now sending options via TCLO
Nov 23 00:28:08.049: vmx| SOCKET 1 (1496) recv detected client closed connection
Nov 23 00:28:08.068: vcpu-1| Compared tools manifest from host and from the guest. Status = 2.
Nov 23 00:28:08.068: vcpu-1| TOOLS installed legacy version 7428, available legacy version 7428
Nov 23 00:28:08.068: vcpu-1| TOOLS manifest update status is 2 (1-out of date, 2-ok, 3-unknown)
Nov 23 00:28:08.068: vcpu-1| TOOLS will not be autoupgraded.
Nov 23 00:28:08.068: vcpu-1| TOOLS Setting autoupgrade-checked TRUE.
Nov 23 00:28:11.909: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Unknown error 21 (0x15).
Nov 23 00:28:11.909: vmx| ide0:0: Command READ(10) took 1.017 seconds (ok)
Nov 23 00:28:11.930: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Unknown error 21 (0x15).
Nov 23 00:28:11.954: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Unknown error 21 (0x15).
Nov 23 00:28:11.970: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl
Nach oben
Guru
Beiträge: 2237
Registriert: 21.09.2005, 00:12

Beitragvon stefan.becker » 23.11.2008, 10:35

USB und Scanner ist immer so eine Sache in einer VM. Mag für viele gehen, nicht für alle.

Groß was machen kannst du nicht. Am besten kaufst du dir Hardware, die auch mit deinem Host zusammengeht.

Eine VM zur Nutzung von Hardware, die am Host nicht geht, ist und bleibt ein Krampf.
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 23.11.2008, 11:53

Ähm, die Hardware geht am Host, Vista hat sogar hauseigene Treiber dafür .....


Gruss
k. :oops:
Nach oben
Guru
Beiträge: 2237
Registriert: 21.09.2005, 00:12

Beitragvon stefan.becker » 23.11.2008, 12:06

Sorry, habe ich oben falsch gelesen. Hast ja Recht :)
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 23.11.2008, 12:59

Kein Thema :grin: .

Gruss
k. :oops:

Hier die vmx einer XP VM wo der Scanner ohne Probleme funktioniert !
Diese VM wurde allerdings unter 6.0 erstellt.

.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "6"
scsi0.present = "TRUE"
memsize = "1512"
ide0:0.present = "TRUE"
ide0:0.fileName = "Windows XP Professional-cl1.vmdk"
ide1:0.present = "TRUE"
ide1:0.fileName = "G:"
ide1:0.deviceType = "cdrom-raw"
floppy0.autodetect = "FALSE"
ethernet0.present = "TRUE"
ethernet0.wakeOnPcktRcv = "FALSE"
usb.present = "TRUE"
ehci.present = "TRUE"
sound.present = "TRUE"
sound.fileName = "Lautsprecher (Realtek High Defi"
sound.autodetect = "FALSE"
svga.autodetect = "FALSE"
pciBridge0.present = "TRUE"
mks.keyboardFilter = "allow"
displayName = "XP Webdesign"
guestOS = "winxppro"
nvram = "XP Webdesign.nvram"
deploymentPlatform = "windows"
virtualHW.productCompatibility = "hosted"
tools.upgrade.policy = "upgradeAtPowerCycle"

ide1:0.autodetect = "FALSE"
floppy0.fileName = "A:"
extendedConfigFile = "XP Webdesign.vmxf"

numvcpus = "2"
ide0:1.present = "TRUE"
ide0:1.fileName = "H:"
ide0:1.deviceType = "cdrom-raw"
svga.maxWidth = "1280"
svga.maxHeight = "1024"
svga.vramSize = "134217728"
mks.enable3d = "FALSE"

ide0:1.startConnected = "TRUE"
ethernet0.addressType = "generated"
uuid.location = "56 4d 73 be 0a 23 74 47-30 5f 0d 74 a6 f6 e6 b3"
uuid.bios = "56 4d 73 be 0a 23 74 47-30 5f 0d 74 a6 f6 e6 b3"
ide0:0.redo = ""
pciBridge0.pciSlotNumber = "17"
scsi0.pciSlotNumber = "16"
ethernet0.pciSlotNumber = "32"
sound.pciSlotNumber = "33"
ehci.pciSlotNumber = "34"
ethernet0.generatedAddress = "00:0c:29:f6:e6:b3"
ethernet0.generatedAddressOffset = "0"
tools.syncTime = "FALSE"

inVMTeam = "FALSE"

isolation.tools.hgfs.disable = "FALSE"
sharedFolder.maxNum = "1"
sharedFolder0.present = "TRUE"
sharedFolder0.enabled = "TRUE"
sharedFolder0.readAccess = "TRUE"
sharedFolder0.writeAccess = "TRUE"
sharedFolder0.hostPath = "E:\"
sharedFolder0.guestName = "Sicherung 1"
sharedFolder0.expiration = "never"

usb.autoConnect.device0 = ""

checkpoint.vmState = ""

vmotion.checkpointFBSize = "134217728"
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 26.11.2008, 18:21

So, nun mal VM auf ein 32 Bit Vista als Host installiert .... gleiches Problem.
Scanner agiert Hardwaretechnisch voll,beim Ende des Scan kommt der I/O Fehler in Fedora.

Gruss
k. :oops:
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 27.11.2008, 18:35

Tach :D ,
was mir noch auffällt ist, das wohl normalerweise beim Connectieren an die VM vom Host eine Meldung über " Sicheres Entfernen " kommen sollte, kommt bei mir nicht......
!
Wirklich niemand eine Idee ?
Gruss
K. :oops:
Nach oben
Benutzeravatar
UNSTERBLICH(R.I.P.)
Beiträge: 14759
Registriert: 09.08.2003, 05:41
Wohnort: sauerland
Kontaktdaten:
Kontaktdaten von continuum

Beitragvon continuum » 27.11.2008, 19:26

Guck mal deine preferences.ini durch - vielleicht hast du den hint deaktiviert ...

hint = Hinweis - in der preferences.ini steht drin welche hints deaktiviert sind
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 30.11.2008, 13:13

So, habe die ref.ini jetzt mal kopiert.
Nicht an der Hardwarekompatibilität = 6 stören, war ein Versuch :cry: .
-------------------------------------------

.encoding = "windows-1252"
pref.eula.0.appName = "VMware Workstation"
pref.eula.0.buildNumber = "126130"
pref.mruDest0.present = "FALSE"
pref.mruDest0.destString = ""
pref.mruDest0.user = ""
pref.mruDest1.present = "FALSE"
pref.mruDest1.destString = ""
pref.mruDest1.user = ""
pref.mruDest2.present = "FALSE"
pref.mruDest2.destString = ""
pref.mruDest2.user = ""
pref.mruDest3.present = "FALSE"
pref.mruDest3.destString = ""
pref.mruDest3.user = ""
pref.mruDest4.present = "FALSE"
pref.mruDest4.destString = ""
pref.mruDest4.user = ""
pref.mruDest5.present = "FALSE"
pref.mruDest5.destString = ""
pref.mruDest5.user = ""
pref.mruDest6.present = "FALSE"
pref.mruDest6.destString = ""
pref.mruDest6.user = ""
pref.mruDest7.present = "FALSE"
pref.mruDest7.destString = ""
pref.mruDest7.user = ""
pref.mruATS0.present = "FALSE"
pref.mruATS0.atsString = ""
pref.mruATS0.domain = ""
pref.mruATS0.user = ""
pref.mruATS0.secure = "FALSE"
pref.mruATS0.port = "0"
pref.mruATS1.present = "FALSE"
pref.mruATS1.atsString = ""
pref.mruATS1.domain = ""
pref.mruATS1.user = ""
pref.mruATS1.secure = "FALSE"
pref.mruATS1.port = "0"
pref.mruATS2.present = "FALSE"
pref.mruATS2.atsString = ""
pref.mruATS2.domain = ""
pref.mruATS2.user = ""
pref.mruATS2.secure = "FALSE"
pref.mruATS2.port = "0"
pref.mruATS3.present = "FALSE"
pref.mruATS3.atsString = ""
pref.mruATS3.domain = ""
pref.mruATS3.user = ""
pref.mruATS3.secure = "FALSE"
pref.mruATS3.port = "0"
pref.mruATS4.present = "FALSE"
pref.mruATS4.atsString = ""
pref.mruATS4.domain = ""
pref.mruATS4.user = ""
pref.mruATS4.secure = "FALSE"
pref.mruATS4.port = "0"
pref.mruATS5.present = "FALSE"
pref.mruATS5.atsString = ""
pref.mruATS5.domain = ""
pref.mruATS5.user = ""
pref.mruATS5.secure = "FALSE"
pref.mruATS5.port = "0"
pref.mruATS6.present = "FALSE"
pref.mruATS6.atsString = ""
pref.mruATS6.domain = ""
pref.mruATS6.user = ""
pref.mruATS6.secure = "FALSE"
pref.mruATS6.port = "0"
pref.mruATS7.present = "FALSE"
pref.mruATS7.atsString = ""
pref.mruATS7.domain = ""
pref.mruATS7.user = ""
pref.mruATS7.secure = "FALSE"
pref.mruATS7.port = "0"
pref.registrationViewed = "FALSE"
pref.usbDev.maxDevs = "0"
pref.keyboardAndMouse.maxProfiles = "0"

webUpdate.lastCheckTime = "1228054019"

prefvmx.defaultVMPath = "D:\Virtuelle Maschinen"
pref.placement.left = "184"
pref.placement.top = "184"
pref.placement.right = "1144"
pref.placement.bottom = "911"
pref.tip.index = "1"
pref.defaultVirtualHW.useLatest = "FALSE"
pref.defaultVirtualHW.version = "6"

pref.sharedFolder.maxNum = "1"
pref.sharedFolder0.enabled = "FALSE"
pref.sharedFolder0.vmPath = "/vm/|23737e14311d5ee5cc/"
pref.sharedFolder0.guestName = "E"
pref.sharedFolder0.hostPath = "E:\"
Nach oben
Member
Beiträge: 12
Registriert: 20.11.2008, 23:15

Beitragvon kungfu » 05.12.2008, 15:03

Mhhh, ich verstehe es nicht, mit VirtualBox klappt es ohne Probleme...........
Es muss am Zusammenspiel der VM mit Fedora ( oder Linux allgemein, da Suse das selbe Problem generiert ) liegen.

Gruss
k. :oops:
Nach oben
Antworten

Zurück zu „VMware Workstation und VMware Workstation Pro“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 14 Gäste