VMware-Forum

Hallo,

als einer von vielen haben auch wir das Problem, dass in Zeiten in denen einer der Gäste viel Platten-IO anfordert die Performance aller Gäste ins bodenlose einbricht ....

Meine Frage: Gibt es in VMserver 1 (oder Version 2 oder ESX(i) ) die Möglichkeit die maximal von einem Gast nutzbare IO (in IOPS und MBPS) zu beschränken?

... ich kann einfach nicht genügend Platten IO an die Server hängen ... heute haben die Hosts ein eigenes RAID aus SAS 15K Platten und die VMs liegen auf RAID-Sets mit 15 * SATAII und PERC/6E ....

mr.migu

sind deine vmx-files und die config.ini gut ?
Poste mal ein vmware.log

Eine Möglichkeit gäbe es nur über 3rd Party, z.B. DataCore SANmelody. Das kann QoS auf Storagelevel. Andere Möglichkeiten sind mir so nicht bekannt.

Hallo und DANKE,

Attachment anhängen geht leider nicht (...maximale Größe erreicht ..):

Im Logfile steht zu Haufe: SCSI0:0: Command WRITE(10) took 1.124 seconds (ok)
... die Sekunden Zahl schwankt immer zwischen 1 und 3 ....

Der Gast ist eine WindowsXP SP2, 1CPU, 2GB RAM -

Der Host: DELL 2970, 2 Quad Core Opteron, 16 GB, 2*SAS für Host, 15*SATA für Gäste,
OpenSuSE 10.3 32Bit, VMware-Server 1.0.6, es laufen 7 Gäste ....

Danke - mr.migu

Das vmx-File:
#!/usr/bin/vmware
config.version = "8"
virtualHW.version = "4"
memsize = "2048"
MemAllowAutoScaleDown = "FALSE"
MemTrimRate = "-1"
displayName = "BuildPC_27"
guestOS = "winxppro"
tools.remindInstall = "FALSE"
floppy0.present = "TRUE"
floppy0.fileName = "A:"
sound.present = "FALSE"
sound.filename = "-1"
sound.autodetect = "TRUE"
usb.present = "FALSE"
ethernet0.present = "TRUE"
ethernet0.addressType = "generated"
ethernet0.connectionType = "bridged"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "clone.vmdk"
ide0:0.present = "TRUE"
ide0:0.autodetect = "TRUE"
ide0:0.filename = "auto detect"
ide0:0.deviceType = "cdrom-raw"
scsi0.present = "TRUE"
scsi0.virtualDev = "buslogic"
buslogic.noDriver = "FALSE"
priority.grabbed = "normal"
priority.ungrabbed = "normal"
floppy0.startConnected = "FALSE"
floppy0.autodetect = "TRUE"
scsi0:0.redo = ""
ide0:0.startConnected = "TRUE"
ethernet0.generatedAddress = "00:0c:29:10:d9:d9"
uuid.location = "56 4d a3 c6 5d 9e d0 3d-a2 be a8 f2 98 5a 25 01"
uuid.bios = "56 4d 4d ef 45 1f 89 60-20 9b 20 d4 f1 10 d9 d9"
ethernet0.generatedAddressOffset = "0"
tools.syncTime = "TRUE"
ide0:0.clientDevice = "TRUE"
ide0:0.exclusive = "TRUE"
workingDir = "."
autostart = "poweron"

ich brauche auch deine config.ini - oder du postest ein log

DANKE und Hallo,

leider darf ich keine Dateien Anhängen ...

In /etc/vmware habe ich die Datei config gefunden ... kann ich das LOG irgendwie anders posten?

vmnet1.hostonlyaddress = "192.168.38.1"
serverd.init.fullpath = "/usr/lib/vmware/serverd/init.pl"
authd.client.port = "904"
control.fullpath = "/usr/bin/vmware-cmd"
authd.fullpath = "/usr/sbin/vmware-authd"
loop.fullpath = "/usr/bin/vmware-loop"
libdir = "/usr/lib/vmware"
vmware.fullpath = "/usr/bin/vmware"
vmnet1.hostonlynetmask = "255.255.255.0"
vmdir = "/VM"
dhcpd.fullpath = "/usr/bin/vmnet-dhcpd"
serverd.fullpath = "/usr/sbin/vmware-serverd"
datastore.name = "local"
datastore.localpath = "/VM/"

DANKE!
mr.migu

Dann poste doch einfach mal den Inhalt der Log-Datei

Hallo,

die ersten Zeilen des Logfiles .... ich habe diverse Zeilen rau/abgeschnitten ...
tausende Zeilen der Art: vmx| SCSI0:0: Command WRITE(10) took 1.073 seconds (ok) ...

--> Wenn ich mir den Rechner in dieser Zeit mit iostat anschaue, so sehe ich eine fast 100% Auslastung des Plattensystems ...
Schön das eine einzige VM in der Lage ist die 15 Platten komplett zu nutzen, aber das ergibt eine sehr unschöne Verteilung der Ressourcen und stellt die Praxis-Tauglichkeit doch sehr in Frage ... kann der ESX dass IO Beschränken???

mr.migu

vmx| Log for VMware Server pid=30126 version=1.0.6 build=build-91891 option=Release
vmx| Command line: "/usr/lib/vmware/bin/vmware-vmx" "-C" "-@" """" "/VM/VMspace02/BuildPC/clone.vmx"
vmx| vmxvmdb: Index name being generated from config file
vmx| VMXVmdbConnectServerd - Trying to discover serverd
vmx| MStat: Creating Stat system.cpuusage
vmx| MStat: Creating Stat system.ram
vmx| MStat: Creating Stat system.uptime
vmx| MStat: Creating Stat system.load
vmx| cpuids[0].id81.ecx = 0x7ff
...
vmx| cpuids[7].id81.ecx = 0x7ff
vmx| pcpu #0 CPUID numEntries=5 AuthcAMDenti
vmx| pcpu #0 CPUID version=0x100f23 id1.edx=0x178bfbff id1.ecx=0x802009 id1.ebx=0x40800
vmx| pcpu #0 CPUID id80.eax=8000001a id81.edx=0xefd3fbff id81.ecx=0x7ff
...
vmx| pcpu #7 CPUID numEntries=5 AuthcAMDenti
vmx| pcpu #7 CPUID version=0x100f23 id1.edx=0x178bfbff id1.ecx=0x802009 id1.ebx=0x7040800
vmx| pcpu #7 CPUID id80.eax=8000001a id81.edx=0xefd3fbff id81.ecx=0x7ff
vmx| CPUID id1.edx: 0x178bfbff id1.ecx: 0x802009 id81.edx: 0xefd3fbff id81.ecx: 0x7ff
vmx| CPUID id88.ecx: 0x2000 id88.edx: 0
vmx| Setup symlink /var/run/vmware/%2FVM%2FVMspace02%2FBuildPC%2Fclone%2Evmx -> /var/run/vmware/root/30126
vmx| ACL_InitCapabilities: here 1 (bug 63252)
vmx| changing directory to /VM/VMspace02/BuildPC/.
vmx| Config file: /VM/VMspace02/BuildPC/clone.vmx
vmx| CnxAcceptConnection: Could not receive fd on 27: invalid control message
vmx| Failed to get IPC connection
vmx| Read from FIFO 32 -- connecting to serverd...
vmx| VMDB: Connected to serverd
vmx| VMXVmdbCbVmVmxExecState: Exec state change requested to state poweredOn without reset
vmx| PowerOn
vmx| Host ACPI: SRAT @ 0x000fbfd4
vmx| Host ACPI: SRAT: LAPIC ID 0x00, proximity domain low 0x00
vmx| Host ACPI: SRAT: LAPIC ID 0x01, proximity domain low 0x00
vmx| Host ACPI: SRAT: LAPIC ID 0x02, proximity domain low 0x00
vmx| Host ACPI: SRAT: LAPIC ID 0x03, proximity domain low 0x00
vmx| Host ACPI: SRAT: LAPIC ID 0x04, proximity domain low 0x01
vmx| Host ACPI: SRAT: LAPIC ID 0x05, proximity domain low 0x01
vmx| Host ACPI: SRAT: LAPIC ID 0x06, proximity domain low 0x01
vmx| Host ACPI: SRAT: LAPIC ID 0x07, proximity domain low 0x01
vmx| Host: CPU #0 LAPIC ID 0x00, node 0x00
vmx| Host: CPU #1 LAPIC ID 0x01, node 0x00
vmx| Host: CPU #2 LAPIC ID 0x02, node 0x00
vmx| Host: CPU #3 LAPIC ID 0x03, node 0x00
vmx| Host: CPU #4 LAPIC ID 0x04, node 0x01
vmx| Host: CPU #5 LAPIC ID 0x05, node 0x01
vmx| Host: CPU #6 LAPIC ID 0x06, node 0x01
vmx| Host: CPU #7 LAPIC ID 0x07, node 0x01
vmx| HOST sysname Linux, nodename bergamo, release 2.6.22.18-0.2-bigsmp, version #1 SMP 2008-06-09 13:53:20 +0200, machine i686, SMP, hz=250
vmx| DICT --- USER PREFERENCES
vmx| DICT --- USER DEFAULTS
vmx| DICT --- HOST DEFAULTS
vmx| DICT vmnet1.hostonlyaddress = 192.168.38.1
vmx| DICT serverd.init.fullpath = /usr/lib/vmware/serverd/init.pl
vmx| DICT authd.client.port = 904
vmx| DICT control.fullpath = /usr/bin/vmware-cmd
vmx| DICT authd.fullpath = /usr/sbin/vmware-authd
vmx| DICT loop.fullpath = /usr/bin/vmware-loop
vmx| DICT libdir = /usr/lib/vmware
vmx| DICT vmware.fullpath = /usr/bin/vmware
vmx| DICT vmnet1.hostonlynetmask = 255.255.255.0
vmx| DICT vmdir = /VM
vmx| DICT dhcpd.fullpath = /usr/bin/vmnet-dhcpd
vmx| DICT serverd.fullpath = /usr/sbin/vmware-serverd
vmx| DICT datastore.name = local
vmx| DICT datastore.localpath = /VM/
vmx| DICT --- SITE DEFAULTS
vmx| DICT tag.help = introduction.htm
vmx| DICT tag.configurationEditor = config_editor_newvm.htm
vmx| DICT tag.ideConfig = devices_virtualdrive.htm
vmx| DICT tag.floppyConfig = devices_floppy.htm
vmx| DICT tag.mouseConfig = devices_mouse.htm
vmx| DICT tag.netConfig = devices_netadapter.htm
vmx| DICT tag.parallelConfig = devices_parallel.htm
vmx| DICT tag.serialConfig = devices_serial.htm
vmx| DICT tag.soundConfig = devices_sound.htm
vmx| DICT tag.memConfig = configvm_memory.htm
vmx| DICT tag.miscConfig = configvm.htm
vmx| DICT tag.usbConfig = devices_usb.htm
vmx| DICT tag.displayConfig = configvm_display-problems.htm
vmx| DICT tag.tools = vmtools.htm
vmx| DICT --- COMMAND LINE
vmx| DICT gui.managementUI = TRUE
vmx| DICT --- CONFIGURATION
vmx| DICT config.version = 8
vmx| DICT virtualHW.version = 4
vmx| DICT memsize = 2048
vmx| DICT MemAllowAutoScaleDown = FALSE
vmx| DICT MemTrimRate = -1
vmx| DICT displayName = BuildPC_27
vmx| DICT guestOS = winxppro
vmx| DICT tools.remindInstall = FALSE
vmx| DICT floppy0.present = TRUE
vmx| DICT floppy0.fileName = A:
vmx| DICT sound.present = FALSE
vmx| DICT sound.filename = -1
vmx| DICT sound.autodetect = TRUE
vmx| DICT usb.present = FALSE
vmx| DICT ethernet0.present = TRUE
vmx| DICT ethernet0.addressType = generated
vmx| DICT ethernet0.connectionType = bridged
vmx| DICT scsi0:0.present = TRUE
vmx| DICT scsi0:0.fileName = clone.vmdk
vmx| DICT ide0:0.present = TRUE
vmx| DICT ide0:0.autodetect = TRUE
vmx| DICT ide0:0.filename = auto detect
vmx| DICT ide0:0.deviceType = cdrom-raw
vmx| DICT scsi0.present = TRUE
vmx| DICT scsi0.virtualDev = buslogic
vmx| DICT buslogic.noDriver = FALSE
vmx| DICT priority.grabbed = normal
vmx| DICT priority.ungrabbed = normal
vmx| DICT floppy0.startConnected = FALSE
vmx| DICT floppy0.autodetect = TRUE
vmx| DICT scsi0:0.redo =
vmx| DICT ide0:0.startConnected = TRUE
vmx| DICT ethernet0.generatedAddress = 00:0c:29:10:d9:d9
vmx| DICT uuid.location = 56 4d c8 c5 a5 fc 3d 60-9f 46 a3 ea 21 3f d8 f2
vmx| DICT uuid.bios = 56 4d 4d ef 45 1f 89 60-20 9b 20 d4 f1 10 d9 d9
vmx| DICT ethernet0.generatedAddressOffset = 0
vmx| DICT tools.syncTime = TRUE
vmx| DICT ide0:0.clientDevice = TRUE
vmx| DICT ide0:0.exclusive = TRUE
vmx| DICT workingDir = .
vmx| DICT autostart = poweron
vmx| DICT --- USER DEFAULTS
vmx| DICT --- HOST DEFAULTS
vmx| DICT vmnet1.hostonlyaddress = 192.168.38.1
vmx| DICT serverd.init.fullpath = /usr/lib/vmware/serverd/init.pl
vmx| DICT authd.client.port = 904
vmx| DICT control.fullpath = /usr/bin/vmware-cmd
vmx| DICT authd.fullpath = /usr/sbin/vmware-authd
vmx| DICT loop.fullpath = /usr/bin/vmware-loop
vmx| DICT libdir = /usr/lib/vmware
vmx| DICT vmware.fullpath = /usr/bin/vmware
vmx| DICT vmnet1.hostonlynetmask = 255.255.255.0
vmx| DICT vmdir = /VM
vmx| DICT dhcpd.fullpath = /usr/bin/vmnet-dhcpd
vmx| DICT serverd.fullpath = /usr/sbin/vmware-serverd
vmx| DICT datastore.name = local
vmx| DICT datastore.localpath = /VM/
vmx| DICT --- SITE DEFAULTS
vmx| DICT tag.help = introduction.htm
vmx| DICT tag.configurationEditor = config_editor_newvm.htm
vmx| DICT tag.ideConfig = devices_virtualdrive.htm
vmx| DICT tag.floppyConfig = devices_floppy.htm
vmx| DICT tag.mouseConfig = devices_mouse.htm
vmx| DICT tag.netConfig = devices_netadapter.htm
vmx| DICT tag.parallelConfig = devices_parallel.htm
vmx| DICT tag.serialConfig = devices_serial.htm
vmx| DICT tag.soundConfig = devices_sound.htm
vmx| DICT tag.memConfig = configvm_memory.htm
vmx| DICT tag.miscConfig = configvm.htm
vmx| DICT tag.usbConfig = devices_usb.htm
vmx| DICT tag.displayConfig = configvm_display-problems.htm
vmx| DICT tag.tools = vmtools.htm
vmx| DICT --- GLOBAL SETTINGS
vmx| Msg_Hint: msg.guestos.xp (not shown)
vmx| Msg_Hint: msg.hostlinux.othervms (not shown)
vmx| WSSCAN: reserved mem (in MB) min=32 max=16160 recommended=16160
vmx| hostMem=16256 maxAllowedAll=-1 maxAllowedVM=3600
vmx| totOverhead=16
vmx| WSSCAN: used rec mem (in MB) 16160
vmx| WSSCAN: Overhead 530673 paged 9122 nonpaged 4096 maxFBSize
vmx| WSSCAN 6 318894 4136960 -1 4136960 -1 50 1321206
vmx| LICENSE using: '/etc/vmware/license.vs.1.0-00'
vmx| STATDECLGROUP stats Root "" null
vmx| Host CPUID features: version 0x100f23 id1.edx 0x178bfbff id1.ecx 0x802009 id81.edx 0xefd3fbff id81.ecx 0x7ff
vmx| CPU.cpuFeatures = 0xd83dfff8
vmx| CPUID after masking: version 0x100f23 id1.edx 0x78bfbff id1.ecx 0x802009 id81.edx 0xefd3fbff id81.ecx 0x7e9 id88.ecx 0x2000
vmx| CPU.cpuFeatures = 0xd83dfff8
vmx| APIC: Local APIC at 0xfee00000
vmx| KHZEstimate 2194637
vmx| MHZEstimate 2195
vmx| NumVCPUs 1
vmx| UUID: location-UUID is 56 4d a3 c6 5d 9e d0 3d-a2 be a8 f2 98 5a 25 01
vmx| UUID: canonical path is /VM/VMspace02/BuildPC/clone.vmx
vmx| UUID: location-UUID is 56 4d a3 c6 5d 9e d0 3d-a2 be a8 f2 98 5a 25 01
vmx| Msg_Question:
vmx| [msg.uuid.moved] ...
vmx| Accepted new connection at 109 for thread servercontrol (0x84d1360)
vmx| VUINewControlConnection: before slow ACL gunk (bug 63252).
vmx| ACL_InitCapabilities: here 2 (bug 63252)
vmx| VUINewControlConnection: after slow ACL gunk (bug 63252).
vmx| VUI: A new VMControl client connected.
vmx| IPC version negotiation version: VMX returning 2.1 to servercontrol
vmx| IPC vmcontrol-temp version: VMX returning 11.4 to servercontrol that tried 11.4
vmx| Msg_Question: msg.uuid.moved reply=2
vmx| UUID: Writing uuid.location 56 4d a3 c6 5d 9e d0 3d-a2 be a8 f2 98 5a 25 01
vmx| MM: Using partialmap, 524288 pages AC 0 CE 1 TM 0 DOHU 0
vmx| UUID: canonical path is /VM/VMspace02/BuildPC/clone.vmx
vmx| UUID: location-UUID is 56 4d a3 c6 5d 9e d0 3d-a2 be a8 f2 98 5a 25 01
vmx| MM: using fileName /VM/VMspace02/BuildPC/564da3c6-5d9e-d03d-a2be-a8f2985a2501.vmem for paging
vmx| Msg_Reset:
vmx| ----------------------------------------
vmx| Opened paging file /VM/VMspace02/BuildPC/564da3c6-5d9e-d03d-a2be-a8f2985a2501.vmem
vmx| Mapped mainmem as pageable
vmx| MStat: Creating Stat vm.cpuusage
vmx| MStat: Creating Stat vm.ram
vmx| MStat: Creating Stat vm.uptime
vmx| DISK: OPEN scsi0:0 '/VM/VMspace02/BuildPC/clone.vmdk' persistent R[(null)]
vmx| AIOGNRC: Starting 6 I/O threads.
vmx| DISKLIB-DSCPTR: Opened [0]: "clone-s001.vmdk" (0xa)
vmx| DISKLIB-DSCPTR: Opened [1]: "clone-s002.vmdk" (0xa)
...
vmx| DISKLIB-DSCPTR: Opened [131]: "clone-s132.vmdk" (0xa)
vmx| DISKLIB-LINK : Opened '/VM/VMspace02/BuildPC/clone.vmdk' (0xa): twoGbMaxExtentSparse, 534773760 sectors / 261120 Mb.
vmx| DISKLIB-LIB : Opened "/VM/VMspace02/BuildPC/clone.vmdk" (flags 0xa).
vmx| DISK: OPEN '/VM/VMspace02/BuildPC/clone.vmdk' Geo (33288/255/63) BIOS Geo (2610/255/63) freeSpace=271718Mb
vmx| TimeTracker host to guest rate conversion 5626668614917428 @ 2194637000Hz -> 5626668614917428 @ 2194637000Hz
vmx| TimeTracker host to guest rate conversion ((x * 2147483648) >> 31) + 0
vmx| MStat: Creating Stat ide0:0.bytesread
vmx| MStat: Creating Stat ide0:0.byteswritten
vmx| SCSI0: UNTAGGED commands will be converted to ORDER tags.
vmx| MStat: Creating Stat scsi0:0.bytesread
vmx| MStat: Creating Stat scsi0:0.byteswritten
vmx| DISKUTIL: scsi0:0 : capacity=534773760
vmx| DISKUTIL: scsi0:0 : geometry=2610/255/63
vmx| MStat: Creating Stat vm.heartbeat
vmx| DISKUTIL: scsi0:0 : toolsVersion = 7392
vmx| TOOLS INSTALL initializing state to IDLE on power on.
vmx| DVGA: DVGA is not supported since the host uses kernel framebuffer
vmx| DVGA: Full screen VGA will not be available.
vmx| VMMon_GetkHzEstimate: Calculated 2194375 kHz
vmx| VLANCE: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks
vmx| MStat: Creating Stat ethernet0.bytesread
vmx| MStat: Creating Stat ethernet0.byteswritten
vmx| Ethernet0 MAC Address: 00:0c:29:10:d9:d9
vmx| VMXNET: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks, dontClusterSize is 128
vmx| E1000: checksum cycles/kB: C=674 asm=329
vmx| VMX_PowerOn: ModuleTable_PowerOn = 1
vmx| VMX setting maximum IPC write buffers to 0 packets, 0 bytes
mks| Async MKS thread is alive
vcpu-0| APIC: version = 0x10, max LVT = 5
vcpu-0| APIC: LDR = 0x8000000, DFR = 0xffffffff
vcpu-0| PShare: enabled 1, scanRate 32, checkRate 16
vcpu-0| guestCpuFeatures = 0xd83dfff8
vcpu-0| Init modules.
vcpu-0| CPU reset: hard
vmx| VNET: Notification enabled for Ethernet0
vcpu-0| sz=3096544
vcpu-0| vmm32 initialized: Releasebuild-91891. cflags: 0x00000002.01803000.00000054
vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0x0) and 0xec000000(0x0)
vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
vcpu-0| SVGA: Registering IOSpace at 0x1400 (0x0)
vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
mks| Ignoring update request in VGA_Expose (mode change pending).
vcpu-0| DISKUTIL: scsi0:0 : geometry=2610/255/63
vcpu-0| BIOS-UUID is 56 4d 4d ef 45 1f 89 60-20 9b 20 d4 f1 10 d9 d9
vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7392
vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7392
mks| VNCENCODE 1 encoding mode change: (720x400x16depth,16bpp)
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| Unknown int 10h func 0x2000
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
mks| VNCENCODE 1 encoding mode change: (640x480x16depth,16bpp)
vcpu-0| BUSLOGIC: Store HAL[20] = 0x00fb
vcpu-0| BUSLOGIC: Store HAL[22] = 0x0400
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
vcpu-0| BUSLOGIC: Store HAL[16] = 0xffff
vcpu-0| BUSLOGIC: Store HAL[18] = 0xfe01
mks| VNCENCODE 1 encoding mode change: (720x400x16depth,16bpp)
mks| VNCENCODE 1 encoding mode change: (640x480x16depth,16bpp)
vcpu-0| SVGA: Unregistering IOSpace at 0x1400 (0x1400)
vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
vcpu-0| SVGA: Registering IOSpace at 0x1400 (0x0)
vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
vcpu-0| VIDE: Already in check condition 02 3a 00
vcpu-0| CDROM: Mode Sense for Unsupported Page 0x1B
vcpu-0| DISKUTIL: scsi0:0 : geometry=2610/255/63
vcpu-0| SCSI0: RESET BUS
vcpu-0| DISKUTIL: scsi0:0 : geometry=2610/255/63
vcpu-0| SCSI DEVICE (scsi0:0): INQUIRY request with EVDP set
vcpu-0| SCSI DEVICE (scsi0:0): MODE SENSE(6) for unsupported page 0x1c
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
mks| SOCKET 1 new update req with non-empty pending: logical error on server/client?
vcpu-0| VNET: Notification enabled for Ethernet0
vcpu-0| Guest: VMXNET: Initialization completed successfully. Version 2.0 Sep 30 2007.
vcpu-0| Guest: VMXNET: Features:
vcpu-0| SVGA: Unregistering IOSpace at 0x1400 (0x1400)
vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
vcpu-0| SVGA: Registering IOSpace at 0x1400 (0x0)
vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
vcpu-0| Guest OS = 0x5008
vmx| SCSI0:0: Command READ(10) took 1.006 seconds (ok)
vmx| SCSI0:0: Command READ(10) took 1.060 seconds (ok)
mks| SVGA: Using extended FIFO: Caps 0x00000007, Flags 0x00000000
vcpu-0| Guest: vmx_fb: Display driver is out of sync with virtual hardware. Disabling 3d.
vcpu-0| Guest: vmx_fb: Current hardware revision: 0.2.
vcpu-0| Guest: vmx_fb: Driver compiled against: 1.4.
vcpu-0| Guest: vmx_fb: Display driver is out of sync with virtual hardware. Disabling 3d.
vcpu-0| Guest: vmx_fb: Current hardware revision: 0.2.
vcpu-0| Guest: vmx_fb: Driver compiled against: 1.4.
vcpu-0| Guest: vmx_fb: Either shader is disabled or we could not find appropriate vertex shader support on the host. Vertex shader will be disabled
vcpu-0| Guest: vmx_fb: Either shader is disabled or we could not find appropriate pixel shader support on the host. Pixel shader support is disabled
vcpu-0| Guest: vmx_fb: Either shader is disabled or we could not find appropriate vertex shader support on the host. Vertex shader will be disabled
vcpu-0| Guest: vmx_fb: Either shader is disabled or we could not find appropriate pixel shader support on the host. Pixel shader support is disabled
mks| VNCENCODE 1 encoding mode change: (1045x695x24depth,32bpp)
mks| MKS remote display status changed, enabling remoteoptimizations
mks| HostOps hideCursor before defineCursor!
mks| HostOps showCursor before defineCursor!
mks| SOCKET 1 new update req with non-empty pending: logical error on server/client?
vcpu-0| GuestRpc: Channel 0, registration number 1, guest application tools-hgfs.
vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7392
vcpu-0| Tools_SetAppRunningStatus: Unknown app name 'tools-hgfs'
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 30
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 31
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 32
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 33
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 35
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 36
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 38
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 45
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 46
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 47
vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 259
vcpu-0| MKS Backdoor get pointer: first time, notify tools are running
vcpu-0| TOOLS unified loop capability requested by 'toolbox-dnd'; now sending options via TCLO
vcpu-0| GuestRpc: Channel 1, registration number 1, guest application toolbox-dnd.
vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7392
vcpu-0| GuestRpc: Channel 2, registration number 1, guest application toolbox.
vcpu-0| TOOLS Reducing idleLoopSpinUS to 500us
vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7392
vcpu-0| TOOLS setting the tools version to '7392'
vcpu-0| Guest: toolbox: Version: build-63231
vcpu-0| TOOLS unified loop capability requested by 'toolbox'; now sending options via TCLO
vmx| SCSI0:0: Command WRITE(10) took 1.061 seconds (ok)
vmx| SCSI0:0: Command READ(10) took 1.252 seconds (ok)
vmx| DISKLIB-LIB :numIOs = 50000 numMergedIOs = 5884 numSplitIOs = 311
vmx| SCSI0:0: Command READ(10) took 1.156 seconds (ok)
vmx| SCSI0:0: Command WRITE(10) took 1.276 seconds (ok)
vcpu-0| DISKLIB-LIB :numIOs = 100000 numMergedIOs = 10152 numSplitIOs = 463
vmx| SCSI0:0: Command WRITE(10) took 2.009 seconds (ok)
vmx| SCSI0:0: Command WRITE(10) took 1.173 seconds (ok)

Der Abschnitt sagt schon viel aus. Zuerst legt er ein Pagingfile von 2GB für die VM (jede deiner VM's ) an und dann ist die v.Disk auch noch als Sparse angelegt. Zumindest eine Bremse hast du mit der Einstellung Persistent im Independent Disk Mode in den erweiterten Disk-Konfigs gelöst.

Um solche Performance-Einbrüche zu verhindern bietet sich auch das automatisiert verzögerte Starten deiner VM's nach einem Reboot an. Leider sind diese Einstellungen nur über die Web-Console im Browser und nicht mit der VMware_Server_Console oder mit dem manuellem Eingriff in die vmx-Konfig zu erreichen.
Weiteres zur manuellen Konfig steht auch im Posting VMware_bei_Systemstart