Seite 1 von 1

Problem: HP Scanjet 4400c USB

Verfasst: 13.11.2008, 16:24
von juetaetzs
Hallo,
ich will mit vmware server V1.08 folgendes Problem lösen:
Auf dem Host läuft Vista ultimate 32
Da es für meinen Scanner HP Scanjet 4400c keine treiber mehr gibt, dachte ich mir ich installiere mal windows XPSP1 auf einer VM, um über diese VM meinen Scanner benutzen zu können.
USB Controller sind zur VM geadded worden, Scanner hängt an einem USB 1.1 Hub .
Folgendes Problem tritt nun auf:
Das Vista (Host) erkennt den Scanner, die VM nicht.
Unter VM > removable devices > usb devices > wird mein Fritz Wlan Stick und mein LOGITECH Keyboard angezeigt.
Es kann aber kein Häckchen gesetzt werden.
Wie bringe ich nun die VM dazu meinen Scanner zu erkennen?
Vielen Dank
Jürgen

Verfasst: 14.11.2008, 07:45
von Dayworker
Ich machs unter XPSP2 immer so, daß ich den Gerätemanager nach neuen Geräten suchen lasse und die Abfrage nach neuen Treibern dabei verneine. Dann steht unten in der Taskleiste ein neues Icon und sagt mir, daß es ein Problem mit einer Hardware gibt und diese nicht verwendet werden kann. Die kann ich dann problemlos in meine VM packen.
Hast du mal probiert, den Scanner direkt ohne Hub anzuschließen?

Verfasst: 14.11.2008, 11:21
von juetaetzs
hi dayworker,
vista host sagt dass es keine Treiber gibt.
VM erkennt den Scanner aber nicht
hatte es auch schon ohne hub probiert, allerdings habe ich irgendwo gelesen, dass usb 2.0 nicht unterstützt nicht.
gruß

edit:
habe es so probiert wie von dayworker geschrieben
jetzt kann ich bei VM > removable devices > usb devices > meinen scanner sehen
aber anklicken bzw häckchen setzen geht nicht :-(

Verfasst: 14.11.2008, 17:48
von Dayworker
Kleine dusselige Nachfrage, aber der VM hast du auch einen USB-Controller hinzugefügt?

Verfasst: 14.11.2008, 18:17
von juetaetzs
anbei die Einstellungen der VM :-)
Memory 528 MB
Hard Disk (IDE 0:0)
Floppy
Ethernet bridged
USB Controllers present
Processors 2
Grüße

Verfasst: 14.11.2008, 22:57
von Dayworker
Okay. Schick mal bitte ein aktuelles Log. Vielleicht läßt sich ja was verhinderndes finden.

Wie sind eigentlich die Zugriffsrechte auf die Dateien dieser VM gesetzt?

Verfasst: 14.11.2008, 23:19
von juetaetzs
hallo,
habe keine ahnung wo sich so eine log datei befindet .... :oops:
wie die zugriffsrechte der VM sind weiss ich auch nicht....

btw:
wenn ich die VM starte, friert mein system erst mal für ca. 1 minute ein (ram geht bis auf 100 % hoch, dann relativ weit runter, dann bootet die VM)
ist das bei dir auch so?
grüße
Jürgen

Verfasst: 14.11.2008, 23:55
von Dayworker
Das Einfrieren ist nicht normal. Deswegen ja auch eine aktuelle Log-Datei.
Die Logs finden sich im VM-Verzeichnis und heißen dann auch noch so :shock:

Verfasst: 15.11.2008, 10:09
von juetaetzs
habe ein datei namens log.al gefunden
Dies ist der Inhalt:
# NOTE: Derived from ..\..\lib\POSIX.pm.
# Changes made here will be lost when autosplit again.
# See AutoSplit.pm.
package POSIX;

#line 337 "..\..\lib\POSIX.pm (autosplit into ..\..\lib\auto/POSIX/log.al)"
sub log {
usage "log(x)" if @_ != 1;
CORE::log($_[0]);
}

# end of POSIX::log
1;
Schätze mal das es die falsche datei ist ...
die war im verzeichnis in dem ich vmware installiert habe.
D:\Program Files\VmWare\VMware Server\VMware Server\perl5\site_perl\5.005\MSWin32-x86\auto\POSIX

grüße und danke schon mal ....
jürgen
:?: :?:

Verfasst: 15.11.2008, 12:01
von Dayworker
Ja, daß ist die falsche.

Ich meinte die vmware.log-Datei und die findet sich im Verzeichnis jeder VM.

Verfasst: 15.11.2008, 12:13
von juetaetzs
anbei die log datei
hoffe es ist die richtige ...
danke und gruß
jürgen

der Anhang funktioniert nicht -- also Copy-Paste

Nov 13 16:07:10: vmx| Log for VMware Server pid=5668 version=1.0.8 build=build-126538 option=Release
Nov 13 16:07:10: vmx| Command line: "D:\Program Files\VMware\VMware Server\VMware Server\bin\vmware-vmx.exe" "-T" "querytoken" "f:\virtual machines\windows xp professional\windows xp professional.vmx"
Nov 13 16:07:10: vmx| vmxvmdb: Index name being generated from config file
Nov 13 16:07:10: vmx| VMXVmdbConnectServerd - Trying to discover serverd
Nov 13 16:07:10: vmx| MStat: Creating Stat system.cpuusage
Nov 13 16:07:10: vmx| MStat: Creating Stat system.ram
Nov 13 16:07:10: vmx| MStat: Creating Stat system.uptime
Nov 13 16:07:10: vmx| MStat: Creating Stat system.load
Nov 13 16:07:10: vmx| VMMon: failed memory configuration
Nov 13 16:07:10: vmx| CPU #0 TSC = 15228386401791
Nov 13 16:07:10: vmx| CPU #1 TSC = 15228386401753
Nov 13 16:07:10: vmx| TSC delta 38
Nov 13 16:07:10: vmx| VMMon_GetkHzEstimate: Calculated 3124522 kHz
Nov 13 16:07:10: vmx| Measured CPU as 3124522 kHz, but OS says 3172000 kHz; using 3172000
Nov 13 16:07:10: vmx| Msg_Hint: msg.hostWin32.cpuSpeedMismatch (shown)
Nov 13 16:07:10: vmx| HINT(no connection): VMware Server has measured your CPU speed to be 3124 MHz, but Windows reports that it is 3172 MHz. This may mean that your computer has a power-saving feature that varies the processor speed. As a result, the clock in your virtual machine may run too fast or too slow.
Nov 13 16:07:10: vmx|
Nov 13 16:07:10: vmx| For a workaround, please refer to the VMware knowledge base article at:
Nov 13 16:07:10: vmx| http://www.vmware.com/info?id=97
Nov 13 16:07:10: vmx| cpuids[0].id81.ecx = 0x1
Nov 13 16:07:10: vmx| cpuids[1].id81.ecx = 0x1
Nov 13 16:07:10: vmx| pcpu #0 CPUID numEntries=10 GenuntelineI
Nov 13 16:07:10: vmx| pcpu #0 CPUID version=0x10676 id1.edx=0xbfebfbff id1.ecx=0x8e3fd id1.ebx=0x20800
Nov 13 16:07:10: vmx| pcpu #0 CPUID id80.eax=80000008 id81.edx=0x20100000 id81.ecx=0x1
Nov 13 16:07:10: vmx| pcpu #1 CPUID numEntries=10 GenuntelineI
Nov 13 16:07:10: vmx| pcpu #1 CPUID version=0x10676 id1.edx=0xbfebfbff id1.ecx=0x8e3fd id1.ebx=0x1020800
Nov 13 16:07:10: vmx| pcpu #1 CPUID id80.eax=80000008 id81.edx=0x20100000 id81.ecx=0x1
Nov 13 16:07:10: vmx| CPUID id1.edx: 0xbfebfbff id1.ecx: 0x8e3fd id81.edx: 0x20100000 id81.ecx: 0x1
Nov 13 16:07:10: vmx| CPUID id88.ecx: 0 id88.edx: 0
Nov 13 16:07:10: vmx| ACL_InitCapabilities: here 1 (bug 63252)
Nov 13 16:07:10: vmx| changing directory to f:\virtual machines\windows xp professional\.
Nov 13 16:07:10: vmx| Config file: f:\virtual machines\windows xp professional\windows xp professional.vmx
Nov 13 16:07:11: vmx| VMDB: Connected to serverd
Nov 13 16:07:11: vmx| IPCHandleConnection: ReadFile failed (code 109)
Nov 13 16:07:11: vmx| VMXVmdbCbVmVmxExecState: Exec state change requested to state poweredOn without reset
Nov 13 16:07:11: vmx| PowerOn
Nov 13 16:07:11: vmx| Host: WIN32 highest NUMA node 0
Nov 13 16:07:11: vmx| Host: WIN32 NUMA node 0, CPU mask 0x0000000000000003
Nov 13 16:07:11: vmx| HOSTINFO: Seeing Intel CPU, numCoresPerCPU 1 numThreadsPerCore 1.
Nov 13 16:07:11: vmx| HOSTINFO: This machine has 2 physical CPUS, 2 total cores, and 2 logical CPUs.
Nov 13 16:07:11: vmx| HOST Windows version 6.0, build 6001, platform 2, "Service Pack 1", SMP
Nov 13 16:07:11: vmx| DICT --- USER PREFERENCES
Nov 13 16:07:11: vmx| DICT pref.autoFitFullScreen = fitHostToGuest
Nov 13 16:07:11: vmx| DICT pref.view.navBar.type = favorites
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.items.count = 7
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.item0.id = POWER_OFF
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.item1.id = SUSPEND
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.item2.id = POWER_ON
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.item3.id = RESET
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.item4.id = _SEP_
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.item5.id = PREVIEW_PLAYER
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.item6.id = PREVIEW_WS
Nov 13 16:07:11: vmx| DICT pref.mruDest0.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.mruDest0.destString =
Nov 13 16:07:11: vmx| DICT pref.mruDest0.user =
Nov 13 16:07:11: vmx| DICT pref.mruDest1.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.mruDest1.destString =
Nov 13 16:07:11: vmx| DICT pref.mruDest1.user =
Nov 13 16:07:11: vmx| DICT pref.mruDest2.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.mruDest2.destString =
Nov 13 16:07:11: vmx| DICT pref.mruDest2.user =
Nov 13 16:07:11: vmx| DICT pref.mruDest3.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.mruDest3.destString =
Nov 13 16:07:11: vmx| DICT pref.mruDest3.user =
Nov 13 16:07:11: vmx| DICT pref.mruDest4.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.mruDest4.destString =
Nov 13 16:07:11: vmx| DICT pref.mruDest4.user =
Nov 13 16:07:11: vmx| DICT pref.mruDest5.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.mruDest5.destString =
Nov 13 16:07:11: vmx| DICT pref.mruDest5.user =
Nov 13 16:07:11: vmx| DICT pref.mruDest6.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.mruDest6.destString =
Nov 13 16:07:11: vmx| DICT pref.mruDest6.user =
Nov 13 16:07:11: vmx| DICT pref.mruDest7.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.mruDest7.destString =
Nov 13 16:07:11: vmx| DICT pref.mruDest7.user =
Nov 13 16:07:11: vmx| DICT webUpdate.checkPeriod = weekly
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.proj.items.count = 4
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.proj.item0.id = ADD_VM
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.proj.item1.id = POLICIES
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.proj.item2.id = PKG_NEW
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.proj.item3.id = EDIT_SETTINGS
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.snapshot.items.count = 3
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.snapshot.item0.id = SNAPSHOT
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.snapshot.item1.id = REVERT
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.snapshot.item2.id = SNAPSHOT_MANAGER
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.items.count = 6
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.item0.id = FAVORITES
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.item1.id = FULL_SCREEN
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.item2.id = QUICK_SWITCH
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.item3.id = _SEP_
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.item4.id = SUMMARY
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.item5.id = CONSOLE
Nov 13 16:07:11: vmx| DICT webUpdate.checkLast = 1226250667
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.menu.position.ix = 0
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.menu.position.newLine = TRUE
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.position.ix = 1
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.position.newLine = TRUE
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.power.position.length = 118
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.snapshot.position.ix = 2
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.snapshot.position.length = 87
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.position.ix = 3
Nov 13 16:07:11: vmx| DICT pref.view.toolbars.view.position.length = 153
Nov 13 16:07:11: vmx| DICT pref.console.openedObj0.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.console.openedObj0.name = Home
Nov 13 16:07:11: vmx| DICT pref.console.openedObj.maxNum = 4
Nov 13 16:07:11: vmx| DICT pref.placement.left = -7
Nov 13 16:07:11: vmx| DICT pref.placement.top = 26
Nov 13 16:07:11: vmx| DICT pref.placement.right = 1013
Nov 13 16:07:11: vmx| DICT pref.placement.bottom = 763
Nov 13 16:07:11: vmx| DICT pref.console.currentObj.path = /vm/#040e7ea6035e7e0b/
Nov 13 16:07:11: vmx| DICT pref.console.currentObj.type = vm
Nov 13 16:07:11: vmx| DICT pref.console.openedObj1.present = FALSE
Nov 13 16:07:11: vmx| DICT pref.console.openedObj1.name = Windows XP Professional
Nov 13 16:07:11: vmx| DICT pref.console.openedObj2.present = TRUE
Nov 13 16:07:11: vmx| DICT pref.console.openedObj2.type = home
Nov 13 16:07:11: vmx| DICT pref.console.openedObj2.path =
Nov 13 16:07:11: vmx| DICT pref.console.openedObj2.file =
Nov 13 16:07:11: vmx| DICT pref.console.openedObj2.name = Home
Nov 13 16:07:11: vmx| DICT pref.console.openedObj1.type = vm
Nov 13 16:07:11: vmx| DICT pref.console.openedObj1.path = /vm/#040e7ea6035e7e0b/
Nov 13 16:07:11: vmx| DICT pref.console.openedObj1.file = f:\Virtual Machines\Windows XP Professional\Windows XP Professional.vmx
Nov 13 16:07:11: vmx| DICT pref.console.openedObj3.present = TRUE
Nov 13 16:07:11: vmx| DICT pref.console.openedObj3.type = vm
Nov 13 16:07:11: vmx| DICT pref.console.openedObj3.path = /vm/#040e7ea6035e7e0b/
Nov 13 16:07:11: vmx| DICT pref.console.openedObj3.file = f:\Virtual Machines\Windows XP Professional\Windows XP Professional.vmx
Nov 13 16:07:11: vmx| DICT pref.console.openedObj3.name = Windows XP Professional
Nov 13 16:07:11: vmx| DICT hints.hideAll = FALSE
Nov 13 16:07:11: vmx| DICT pref.view.homepage = FALSE
Nov 13 16:07:11: vmx| DICT pref.console.openedObj0.type = home
Nov 13 16:07:11: vmx| DICT pref.console.openedObj0.path = /vm/#040e7ea6035e7e0b/
Nov 13 16:07:11: vmx| DICT pref.console.openedObj0.file = f:\Virtual Machines\Windows XP Professional\Windows XP Professional.vmx
Nov 13 16:07:11: vmx| DICT --- USER DEFAULTS
Nov 13 16:07:11: vmx| DICT --- HOST DEFAULTS
Nov 13 16:07:11: vmx| DICT authd.client.port = 902
Nov 13 16:07:11: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Nov 13 16:07:11: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Nov 13 16:07:11: vmx| DICT datastore.name = local
Nov 13 16:07:11: vmx| DICT datastore.localpath = D:\Virtual Machines\
Nov 13 16:07:11: vmx| DICT --- SITE DEFAULTS
Nov 13 16:07:11: vmx| DICT authd.client.port = 902
Nov 13 16:07:11: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Nov 13 16:07:11: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Nov 13 16:07:11: vmx| DICT datastore.name = local
Nov 13 16:07:11: vmx| DICT datastore.localpath = D:\Virtual Machines\
Nov 13 16:07:11: vmx| DICT --- COMMAND LINE
Nov 13 16:07:11: vmx| DICT --- CONFIGURATION
Nov 13 16:07:11: vmx| DICT config.version = 8
Nov 13 16:07:11: vmx| DICT virtualHW.version = 4
Nov 13 16:07:11: vmx| DICT numvcpus = 2
Nov 13 16:07:11: vmx| DICT scsi0.present = TRUE
Nov 13 16:07:11: vmx| DICT memsize = 528
Nov 13 16:07:11: vmx| DICT ide0:0.present = TRUE
Nov 13 16:07:11: vmx| DICT ide0:0.fileName = F:\VmWareVirtualStorage\Windows XP Professional.vmdk
Nov 13 16:07:11: vmx| DICT ide1:0.present = TRUE
Nov 13 16:07:11: vmx| DICT ide1:0.fileName = G:
Nov 13 16:07:11: vmx| DICT ide1:0.deviceType = cdrom-raw
Nov 13 16:07:11: vmx| DICT floppy0.fileName = A:
Nov 13 16:07:11: vmx| DICT Ethernet0.present = TRUE
Nov 13 16:07:11: vmx| DICT displayName = Windows XP Professional
Nov 13 16:07:11: vmx| DICT guestOS = winxppro
Nov 13 16:07:11: vmx| DICT priority.grabbed = normal
Nov 13 16:07:11: vmx| DICT priority.ungrabbed = normal
Nov 13 16:07:11: vmx| DICT ide1:0.autodetect = FALSE
Nov 13 16:07:11: vmx| DICT floppy0.startConnected = TRUE
Nov 13 16:07:11: vmx| DICT usb.present = TRUE
Nov 13 16:07:11: vmx| DICT ide0:0.redo =
Nov 13 16:07:11: vmx| DICT ethernet0.addressType = generated
Nov 13 16:07:11: vmx| DICT uuid.location = 56 4d 47 97 49 46 7d 2f-b4 80 7f 1b 17 40 b0 23
Nov 13 16:07:11: vmx| DICT uuid.bios = 56 4d 47 97 49 46 7d 2f-b4 80 7f 1b 17 40 b0 23
Nov 13 16:07:11: vmx| DICT checkpoint.vmState =
Nov 13 16:07:11: vmx| DICT ethernet0.generatedAddress = 00:0c:29:40:b0:23
Nov 13 16:07:11: vmx| DICT ethernet0.generatedAddressOffset = 0
Nov 13 16:07:11: vmx| DICT ide1:0.startConnected = TRUE
Nov 13 16:07:11: vmx| DICT tools.syncTime = FALSE
Nov 13 16:07:11: vmx| DICT --- USER DEFAULTS
Nov 13 16:07:11: vmx| DICT --- HOST DEFAULTS
Nov 13 16:07:11: vmx| DICT authd.client.port = 902
Nov 13 16:07:11: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Nov 13 16:07:11: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Nov 13 16:07:11: vmx| DICT datastore.name = local
Nov 13 16:07:11: vmx| DICT datastore.localpath = D:\Virtual Machines\
Nov 13 16:07:11: vmx| DICT --- SITE DEFAULTS
Nov 13 16:07:11: vmx| DICT authd.client.port = 902
Nov 13 16:07:11: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Nov 13 16:07:11: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Nov 13 16:07:11: vmx| DICT datastore.name = local
Nov 13 16:07:11: vmx| DICT datastore.localpath = D:\Virtual Machines\
Nov 13 16:07:11: vmx| DICT --- GLOBAL SETTINGS
Nov 13 16:07:11: vmx| Msg_Hint: msg.guestos.xp (shown)
Nov 13 16:07:11: vmx| HINT(no connection): The Microsoft Windows XP product activation feature creates a key based on the virtual hardware in the virtual machine where it is installed. Changes in the virtual machine configuration may require you to reactivate the guest operating system. To minimize those changes, be sure to set the final memory size for the virtual machine and install VMware Tools before you activate Windows XP.
Nov 13 16:07:11: vmx| For more information about Windows XP product activation and virtual machines see our Web site at "http://www.vmware.com/info?id=21".
Nov 13 16:07:11: vmx|
Nov 13 16:07:11: vmx| Msg_Hint: msg.hostw32.wrongNTversion (shown)
Nov 13 16:07:11: vmx| Create Memory BIO succeeded.
Nov 13 16:07:11: vmx| Create Memory BIO succeeded.
Nov 13 16:07:11: vmx| Accepted new connection at 548 for thread servercontrol (0x1e2350)
Nov 13 16:07:11: vmx| VUINewControlConnection: before slow ACL gunk (bug 63252).
Nov 13 16:07:11: vmx| ACL: Thread from (SYSTEM) gets full perms
Nov 13 16:07:11: vmx| VUINewControlConnection: after slow ACL gunk (bug 63252).
Nov 13 16:07:11: vmx| VUI: A new VMControl client connected.
Nov 13 16:07:11: vmx| IPC version negotiation version: VMX returning 2.1 to servercontrol
Nov 13 16:07:11: vmx| IPC vmcontrol-temp version: VMX returning 11.4 to servercontrol that tried 11.4
Nov 13 16:07:47: vmx| WSSCAN: reserved mem (in MB) min=32 max=3200 recommended=3200
Nov 13 16:07:47: vmx| hostMem=3328 maxAllowedAll=-1 maxAllowedVM=3600
Nov 13 16:07:47: vmx| totOverhead=16
Nov 13 16:07:47: vmx| WSSCAN: used rec mem (in MB) 3200
Nov 13 16:07:47: vmx| WSSCAN: Overhead 141555 paged 11617 nonpaged 4096 maxFBSize
Nov 13 16:09:15: vmx| WSSCAN 1 2 666707 772700 819200 666707 50 0
Nov 13 16:09:53: vmx| LICENSE using: 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware Server\License.gsx.3.0-00'
Nov 13 16:09:54: vmx| STATDECLGROUP stats Root "" null
Nov 13 16:09:57: vmx| Host CPUID features: version 0x10678 id1.edx 0xbfebfbff id1.ecx 0x8e3fd id81.edx 0x20100000 id81.ecx 0x1
Nov 13 16:09:57: vmx| CPU.cpuFeatures = 0xb971ff37
Nov 13 16:09:57: vmx| CPUID after masking: version 0x10678 id1.edx 0xfebfbff id1.ecx 0x8a255 id81.edx 0x20100800 id81.ecx 0x1 id88.ecx 0x0
Nov 13 16:09:57: vmx| CPU.cpuFeatures = 0x9871ff33
Nov 13 16:09:57: vmx| APIC: Local APIC at 0xfee00000
Nov 13 16:10:01: vmx| KHZEstimate 3172000
Nov 13 16:10:01: vmx| MHZEstimate 3172
Nov 13 16:10:01: vmx| NumVCPUs 2
Nov 13 16:10:02: vmx| UUID: location-UUID is 56 4d e2 ee 54 dd ef 2b-ad 98 db fd 55 75 8c 6d
Nov 13 16:10:03: vmx| UUID: canonical path is f:\virtual machines\windows xp professional\windows xp professional.vmx
Nov 13 16:10:03: vmx| UUID: location-UUID is 56 4d 47 97 49 46 7d 2f-b4 80 7f 1b 17 40 b0 23
Nov 13 16:10:03: vmx| MM: Using partialmap, 135168 pages AC 0 CE 1 TM 0 DOHU 0
Nov 13 16:10:03: vmx| UUID: canonical path is f:\virtual machines\windows xp professional\windows xp professional.vmx
Nov 13 16:10:03: vmx| UUID: location-UUID is 56 4d 47 97 49 46 7d 2f-b4 80 7f 1b 17 40 b0 23
Nov 13 16:10:04: vmx| MM: using fileName f:\virtual machines\windows xp professional\564d4797-4946-7d2f-b480-7f1b1740b023.vmem for paging
Nov 13 16:10:04: vmx| Msg_Reset:
Nov 13 16:10:04: vmx| ----------------------------------------
Nov 13 16:10:04: vmx| Opened paging file f:\virtual machines\windows xp professional\564d4797-4946-7d2f-b480-7f1b1740b023.vmem
Nov 13 16:10:04: vmx| Mapped mainmem as pageable
Nov 13 16:10:04: vmx| MStat: Creating Stat vm.cpuusage
Nov 13 16:10:04: vmx| MStat: Creating Stat vm.ram
Nov 13 16:10:04: vmx| MStat: Creating Stat vm.uptime
Nov 13 16:10:07: vmx| DISK: OPEN ide0:0 'F:\VmWareVirtualStorage\Windows XP Professional.vmdk' persistent R[(null)]
Nov 13 16:10:08: vmx| DISKLIB-DSCPTR: Opened [0]: "Windows XP Professional-flat.vmdk" 0 (0xa)
Nov 13 16:10:08: vmx| DISKLIB-LINK : Opened 'F:\VmWareVirtualStorage\Windows XP Professional.vmdk' (0xa): monolithicFlat, 16777216 sectors / 8192 Mb.
Nov 13 16:10:08: vmx| DISKLIB-LIB : Opened "F:\VmWareVirtualStorage\Windows XP Professional.vmdk" (flags 0xa).
Nov 13 16:10:08: vmx| DISK: OPEN 'F:\VmWareVirtualStorage\Windows XP Professional.vmdk' Geo (16383/16/63) BIOS Geo (1044/255/63) freeSpace=62495Mb
Nov 13 16:10:11: vmx| TimeTracker host to guest rate conversion 15794121853843 @ 3172000000Hz -> 15794121853843 @ 3172000000Hz
Nov 13 16:10:11: vmx| TimeTracker host to guest rate conversion ((x * 2147483648) >> 31) + 0
Nov 13 16:10:11: vmx| IPC Socket write error 10053
Nov 13 16:10:12: vmx| VMX IPC closed the connection with thread servercontrol (001E2350)
Nov 13 16:10:12: vmx| VMX: Remote VMControl client servercontrol disconnected unexpectedly.
Nov 13 16:10:12: vmx| VUI iteration interrupted
Nov 13 16:10:13: vmx| MStat: Creating Stat ide0:0.bytesread
Nov 13 16:10:13: vmx| MStat: Creating Stat ide0:0.byteswritten
Nov 13 16:10:13: vmx| MStat: Creating Stat ide1:0.bytesread
Nov 13 16:10:13: vmx| MStat: Creating Stat ide1:0.byteswritten
Nov 13 16:10:13: vmx| SCSI0: UNTAGGED commands will be converted to ORDER tags.
Nov 13 16:10:13: vmx| MStat: Creating Stat vm.heartbeat
Nov 13 16:10:15: vmx| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 13 16:10:15: vmx| TOOLS INSTALL initializing state to IDLE on power on.
Nov 13 16:10:23: vmx| USB: Initializing UHCI host controller
Nov 13 16:10:23: vmx| USB: Initializing USB Generic backend
Nov 13 16:10:23: vmx| USBGW: Connected to HCMON version 1.1
Nov 13 16:10:23: vmx| Unrecognized command "tweakthread 5728 5668".
Nov 13 16:10:25: vmx| VLANCE: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks
Nov 13 16:10:25: vmx| MStat: Creating Stat ethernet0.bytesread
Nov 13 16:10:25: vmx| MStat: Creating Stat ethernet0.byteswritten
Nov 13 16:10:25: vmx| Ethernet0 MAC Address: 00:0c:29:40:b0:23
Nov 13 16:10:25: vmx| VMXNET: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks, dontClusterSize is 128
Nov 13 16:10:25: vmx| E1000: checksum cycles/kB: C=1645 asm=1068
Nov 13 16:10:25: vmx| VirtualProtect MapProtectMem(0x2180000,0x1000) returns 0x1e7
Nov 13 16:10:25: vmx| Can't read-only monitor pages from 0x02180000 to 0x02181000
Nov 13 16:10:25: vmx| VirtualProtect MapProtectMem(0x2182000,0x1000) returns 0x1e7
Nov 13 16:10:25: vmx| Can't read-only monitor pages from 0x02182000 to 0x02183000
Nov 13 16:10:25: vmx| VirtualProtect MapProtectMem(0x2184000,0x0) returns 0x57
Nov 13 16:10:25: vmx| Can't read-only monitor pages from 0x02184000 to 0x02184000
Nov 13 16:10:26: vmx| VMX_PowerOn: ModuleTable_PowerOn = 1
Nov 13 16:10:26: vmx| VMX setting maximum IPC write buffers to 0 packets, 0 bytes
Nov 13 16:10:26: mks| Async MKS thread is alive
Nov 13 16:10:26: vmx| Unrecognized command "tweakthread 3380 5668".
Nov 13 16:10:26: vmx| Unrecognized command "tweakthread 2680 5668".
Nov 13 16:10:26: vcpu-0| APIC: version = 0x14, max LVT = 5
Nov 13 16:10:26: vcpu-0| APIC: LDR = 0x1000000, DFR = 0xffffffff
Nov 13 16:10:26: vcpu-0| PShare: enabled 1, scanRate 32, checkRate 16
Nov 13 16:10:26: vcpu-0| guestCpuFeatures = 0x9871ff33
Nov 13 16:10:26: vcpu-0| Init modules.
Nov 13 16:10:26: vcpu-0| DISKUTIL: ide0:0 : capacity=16777216
Nov 13 16:10:26: vcpu-0| CPU reset: hard
Nov 13 16:10:26: vmx| VNET: Notification enabled for Ethernet0
Nov 13 16:10:43: vmx| FLOPPYLIB-LIB : Sync: syserror Unzulässige Funktion.
Nov 13 16:10:43: vcpu-0| INTELRDMSR(0x8b) = 0x0000060b00000000
Nov 13 16:10:43: vcpu-0| INTELRDMSR(0x17) = 0x040000008884c91d
Nov 13 16:10:43: vcpu-0| sz=3104736
Nov 13 16:10:43: vmx| Unrecognized command "tweakthread 4868 5668".
Nov 13 16:10:43: vcpu-1| APIC: version = 0x14, max LVT = 5
Nov 13 16:10:43: vcpu-1| APIC: LDR = 0x1000000, DFR = 0xffffffff
Nov 13 16:10:43: vcpu-1| guestCpuFeatures = 0x9871ff33
Nov 13 16:10:43: vcpu-1| Init modules.
Nov 13 16:10:43: vcpu-1| CPU reset: hard
Nov 13 16:10:43: vcpu-1| INTELRDMSR(0x8b) = 0x0000060b00000000
Nov 13 16:10:43: vcpu-1| INTELRDMSR(0x17) = 0x040000008884c91d
Nov 13 16:10:43: vcpu-1| sz=3104736
Nov 13 16:10:43: vcpu-1| vmm32 initialized: Releasebuild-126538. cflags: 0x00000002.01803000.00000054
Nov 13 16:10:43: vcpu-0| vmm32 initialized: Releasebuild-126538. cflags: 0x00000002.01803000.00000054
Nov 13 16:10:44: vmx| USB: Found device [name:AVM\ USB\ device vid:057c pid:5601 path:1/3/4 autoclean:1]
Nov 13 16:10:44: vmx| USB: Found device [name:Logitech\ USB\ device vid:046d pid:c227 path:1/6/0/3]
Nov 13 16:10:44: vmx| VMXVmdbLoadUsbDevices: New set of 2 USB devices
Nov 13 16:10:47: mks| Ignoring update request in VGA_Expose (mode change pending).
Nov 13 16:10:50: vcpu-1| CPU reset: soft
Nov 13 16:10:50: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0x0) and 0xec000000(0x0)
Nov 13 16:10:50: vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 13 16:10:50: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 13 16:10:50: vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 13 16:10:50: vcpu-0| SVGA: Registering IOSpace at 0x1420 (0x0)
Nov 13 16:10:50: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 13 16:10:51: vcpu-1| CPU reset: soft
Nov 13 16:10:53: vcpu-0| UHCI: Global Reset
Nov 13 16:10:53: vcpu-0| UHCI: HCReset
Nov 13 16:10:53: vcpu-0| UHCI: HCReset
Nov 13 16:10:54: vcpu-0| AIOGNRC: Starting 2 I/O threads.
Nov 13 16:10:54: vcpu-0| Unrecognized command "tweakthread 2340 5668".
Nov 13 16:10:54: vcpu-0| Unrecognized command "tweakthread 5664 5668".
Nov 13 16:10:54: vcpu-0| Winnt_CDROM: 'G:' Length 24 MaxTransferLength 131072 MaxPhysPages 33
Nov 13 16:10:54: vcpu-0| Winnt_CDROM: AlignMask 0x1 !AsyncEvent TaggedQ ScanUp DMA
Nov 13 16:10:55: vcpu-0| VIDE: Curr CHS info cyls: 17475 heads: 15 sects: 63 lba_cap: 16777216
Nov 13 16:10:55: vcpu-1| CPU reset: soft
Nov 13 16:10:56: mks| VNCENCODE 1 encoding mode change: (640x480x24depth,32bpp)
Nov 13 16:10:57: vcpu-0| BIOS-UUID is 56 4d 47 97 49 46 7d 2f-b4 80 7f 1b 17 40 b0 23
Nov 13 16:10:57: vcpu-0| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 13 16:10:57: vcpu-0| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 13 16:11:03: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:03: mks| VNCENCODE 1 encoding mode change: (720x400x24depth,32bpp)
Nov 13 16:11:07: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:12: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:12: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:12: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:16: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:16: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:16: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:21: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:21: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:21: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:25: vcpu-0| FLOPPYLIB-LIB : Win32Ioctl: syserror Das Gerät ist nicht bereit.
Nov 13 16:11:26: vcpu-0| Unknown int 10h func 0x2000
Nov 13 16:11:26: mks| VNCENCODE 1 encoding mode change: (640x480x24depth,32bpp)
Nov 13 16:11:27: mks| VNCENCODE 1 encoding mode change: (720x400x24depth,32bpp)
Nov 13 16:11:30: mks| VNCENCODE 1 encoding mode change: (640x480x24depth,32bpp)
Nov 13 16:11:30: vcpu-1| CPU reset: soft
Nov 13 16:11:31: vcpu-0| UHCI: Global Reset
Nov 13 16:11:33: vcpu-0| SVGA: Unregistering IOSpace at 0x1420 (0x1420)
Nov 13 16:11:33: vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 13 16:11:33: vcpu-0| SVGA: Registering IOSpace at 0x1420 (0x0)
Nov 13 16:11:33: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 13 16:11:35: vcpu-0| VIDE: Curr CHS info cyls: 17475 heads: 15 sects: 63 lba_cap: 16777216
Nov 13 16:11:36: vcpu-0| SCSI0: RESET BUS
Nov 13 16:11:54: vmx| VIDE: ATAPI DMA 0x25 Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:11:54: vmx| VIDE: ATAPI DMA 0xad Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:11:54: vcpu-1| POLL device deleted
Nov 13 16:11:54: vcpu-0| VNET: Notification enabled for Ethernet0
Nov 13 16:11:56: vcpu-1| SVGA: Unregistering IOSpace at 0x1420 (0x1420)
Nov 13 16:11:56: vcpu-1| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 13 16:11:56: vcpu-1| SVGA: Registering IOSpace at 0x1420 (0x0)
Nov 13 16:11:56: vcpu-1| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 13 16:11:56: vcpu-0| Guest OS = 0x5016
Nov 13 16:11:56: vcpu-0| UHCI: Global Reset
Nov 13 16:12:01: vmx| VIDE: ATAPI DMA 0x25 Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:12:01: vmx| VIDE: ATAPI DMA 0x25 Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:12:01: vmx| VIDE: ATAPI DMA 0x25 Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:12:01: vmx| VIDE: ATAPI DMA 0x25 Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:12:04: mks| SVGA: Using extended FIFO: Caps 0x00000007, Flags 0x00000000
Nov 13 16:12:04: mks| MKS remote display status changed, enabling remoteoptimizations
Nov 13 16:12:04: mks| VNCENCODE 1 encoding mode change: (800x600x24depth,32bpp)
Nov 13 16:12:04: mks| HostOps hideCursor before defineCursor!
Nov 13 16:12:05: mks| SOCKET 1 new update req with non-empty pending: logical error on server/client?
Nov 13 16:12:10: vcpu-1| TOOLS unified loop capability requested by 'toolbox-dnd'; now sending options via TCLO
Nov 13 16:12:10: vcpu-1| GuestRpc: Channel 0, registration number 1, guest application toolbox-dnd.
Nov 13 16:12:10: vcpu-1| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 13 16:12:12: vmx| VIDE: ATAPI DMA 0x25 Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:12:12: vmx| VIDE: ATAPI DMA 0x25 Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:12:12: vcpu-1| MKS Backdoor get pointer: first time, notify tools are running
Nov 13 16:12:12: vcpu-1| GuestRpc: Channel 1, registration number 1, guest application toolbox.
Nov 13 16:12:12: vcpu-1| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 13 16:12:12: vcpu-1| Guest: toolbox: Version: build-126538
Nov 13 16:12:12: vcpu-1| TOOLS setting the tools version to '6536'
Nov 13 16:12:12: vcpu-1| TOOLS unified loop capability requested by 'toolbox'; now sending options via TCLO
Nov 13 16:12:14: vmx| VIDE: ATAPI DMA 0x51 Failed: key 0x2, asc 0x3a, ascq 0x0
Nov 13 16:12:46: vmx| changing directory to f:\virtual machines\windows xp professional\.
Nov 13 16:12:50: vcpu-0| VMMouse: CMD Read ID
Nov 13 16:12:50: vcpu-0| MKS switching absolute mouse on
Nov 13 16:13:15: vmx| VMXVmdbCbVmVmxExecState: Exec state change requested to state poweredOff without reset
Nov 13 16:13:15: vmx| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 13 16:13:15: vmx| TOOLS sending 'OS_Halt' (1) state change request
Nov 13 16:13:16: vcpu-1| GuestRpc: Channel 0 reinitialized.
Nov 13 16:13:16: vcpu-1| Guest: toolbox: Got a logoff event.
Nov 13 16:13:17: vcpu-0| Guest: toolbox: Got a logoff event.
Nov 13 16:13:18: vcpu-1| Guest: toolbox: VMware Tools Service Shutdown.
Nov 13 16:13:18: vcpu-1| Guest: toolbox: VMware Tools Service Stopping.
Nov 13 16:13:18: vcpu-0| GuestRpc: Channel 1 reinitialized.
Nov 13 16:13:21: vcpu-0| POLL device deleted
Nov 13 16:13:21: vcpu-1| VNET: Notification enabled for Ethernet0
Nov 13 16:13:21: vcpu-1| VMMouse: CMD Disable
Nov 13 16:13:21: vcpu-1| VMMouse: Disabling VMMouse mode
Nov 13 16:13:21: vcpu-1| MKS switching absolute mouse on
Nov 13 16:13:21: vcpu-1| UHCI: HCReset
Nov 13 16:13:21: vcpu-0| PIIX4: PM Soft Off. Good-bye.
Nov 13 16:13:21: vmx| Stopping VCPU threads...
Nov 13 16:13:21: mks| Async MKS thread is exiting
Nov 13 16:13:21: vmx| DnD rpc already set to 0
Nov 13 16:13:21: vmx| TOOLS received request in VMX to set option 'enableDnD' -> '0'
Nov 13 16:13:21: vmx| SOCKET 1 close VNC socket on VNCBackendDestroy
Nov 13 16:13:21: vmx| MKS local poweroff
Nov 13 16:13:21: vmx| Lock before MKS lock created. Early poweroff?
Nov 13 16:13:21: vmx| Unlock before MKS lock created. Early poweroff?
Nov 13 16:13:21: vmx| ide0:0: numIOs = 6108 numMergedIOs = 0 numSplitIOs = 0 ( 0.0%)
Nov 13 16:13:21: vmx| AIOWIN32: asyncOps=5787 syncOps=12 bufSize=60Kb delayed=0 fixed=14 sgOp=5455 sgOn=1
Nov 13 16:13:21: IO#0| AIOGNRC: thread #0 exiting (214)
Nov 13 16:13:21: IO#1| AIOGNRC: thread #1 exiting (213)
Nov 13 16:13:21: vmx| AIOGNRC: asyncOps=0 syncOps=0 maxPending=0 maxCompleted=0
Nov 13 16:13:21: vmx| VMX idle exit
Nov 13 16:13:21: vmx| Flushing VMX VMDB connections
Nov 13 16:13:21: vmx| IPC_exit: disconnecting all threads
Nov 13 16:13:21: vmx| VMX exit.
Nov 13 16:13:21: vmx| AIOMGR-S : stat o=4 r=6 w=0 i=0 br=2622 bw=0

Verfasst: 15.11.2008, 12:42
von Dayworker
Der Server1 unterstützt nur 2 USB-Geräte. Deshalb kannst du keine weiteren Geräte hinzufügen. Bei dir sind jedoch schon Geräte von AVM und Logitech der VM zugeordnet.
Der noch bei der Workstation funktionierende Trick mit einem USB-Hub, um mehr USB-Geräte anschließen zu können, zeigte unter Server bisher leider keine Wirkung oder es hat bisher noch niemand etwas dazu geschrieben.

Verfasst: 15.11.2008, 13:12
von juetaetzs
Hi,
habe mal den AVM stick ausgesteckt
und die VM wieder restored...
System fror für fast 5 min ein.
Irgend etwas stimmt da nicht....
als die VM wieder da war gab es keine Geräte mehr unter VM > removable devices > usb devices
oh mann....
keine ahnung ob es was hilft aber ih poste noch mal das aktuelle log ...

Nov 15 12:59:19: vmx| Log for VMware Server pid=5592 version=1.0.8 build=build-126538 option=Release
Nov 15 12:59:19: vmx| Command line: "D:\Program Files\VMware\VMware Server\VMware Server\bin\vmware-vmx.exe" "-T" "querytoken" "f:\virtual machines\windows xp professional\windows xp professional.vmx"
Nov 15 12:59:19: vmx| vmxvmdb: Index name being generated from config file
Nov 15 12:59:19: vmx| VMXVmdbConnectServerd - Trying to discover serverd
Nov 15 12:59:19: vmx| MStat: Creating Stat system.cpuusage
Nov 15 12:59:19: vmx| MStat: Creating Stat system.ram
Nov 15 12:59:19: vmx| MStat: Creating Stat system.uptime
Nov 15 12:59:19: vmx| MStat: Creating Stat system.load
Nov 15 12:59:19: vmx| VMMon: failed memory configuration
Nov 15 12:59:19: vmx| CPU #0 TSC = 34164687874420
Nov 15 12:59:19: vmx| CPU #1 TSC = 34164687874211
Nov 15 12:59:19: vmx| TSC delta 209
Nov 15 12:59:19: vmx| VMMon_GetkHzEstimate: Calculated 3172530 kHz
Nov 15 12:59:19: vmx| Measured CPU as 3172530 kHz, but OS says 3166000 kHz; using 3172530
Nov 15 12:59:19: vmx| Msg_Hint: msg.hostWin32.cpuSpeedMismatch (not shown)
Nov 15 12:59:19: vmx| cpuids[0].id81.ecx = 0x1
Nov 15 12:59:19: vmx| cpuids[1].id81.ecx = 0x1
Nov 15 12:59:19: vmx| pcpu #0 CPUID numEntries=10 GenuntelineI
Nov 15 12:59:19: vmx| pcpu #0 CPUID version=0x10676 id1.edx=0xbfebfbff id1.ecx=0x8e3fd id1.ebx=0x20800
Nov 15 12:59:19: vmx| pcpu #0 CPUID id80.eax=80000008 id81.edx=0x20100000 id81.ecx=0x1
Nov 15 12:59:19: vmx| pcpu #1 CPUID numEntries=10 GenuntelineI
Nov 15 12:59:19: vmx| pcpu #1 CPUID version=0x10676 id1.edx=0xbfebfbff id1.ecx=0x8e3fd id1.ebx=0x1020800
Nov 15 12:59:19: vmx| pcpu #1 CPUID id80.eax=80000008 id81.edx=0x20100000 id81.ecx=0x1
Nov 15 12:59:19: vmx| CPUID id1.edx: 0xbfebfbff id1.ecx: 0x8e3fd id81.edx: 0x20100000 id81.ecx: 0x1
Nov 15 12:59:19: vmx| CPUID id88.ecx: 0 id88.edx: 0
Nov 15 12:59:19: vmx| ACL_InitCapabilities: here 1 (bug 63252)
Nov 15 12:59:19: vmx| changing directory to f:\virtual machines\windows xp professional\.
Nov 15 12:59:19: vmx| Config file: f:\virtual machines\windows xp professional\windows xp professional.vmx
Nov 15 12:59:20: vmx| VMDB: Connected to serverd
Nov 15 12:59:20: vmx| IPCHandleConnection: ReadFile failed (code 109)
Nov 15 12:59:20: vmx| VMXVmdbCbVmVmxExecState: Exec state change requested to state poweredOn without reset
Nov 15 12:59:20: vmx| PowerOn
Nov 15 12:59:20: vmx| Host: WIN32 highest NUMA node 0
Nov 15 12:59:20: vmx| Host: WIN32 NUMA node 0, CPU mask 0x0000000000000003
Nov 15 12:59:20: vmx| HOSTINFO: Seeing Intel CPU, numCoresPerCPU 1 numThreadsPerCore 1.
Nov 15 12:59:20: vmx| HOSTINFO: This machine has 2 physical CPUS, 2 total cores, and 2 logical CPUs.
Nov 15 12:59:20: vmx| Resuming virtual machine from f:\virtual machines\windows xp professional\windows xp professional.vmss
Nov 15 12:59:20: vmx| DUMPER: restoring checkpoint version 8
Nov 15 12:59:20: vmx| Checkpointed in VMware Server, 1.0.8 build-126538, build-126538, Windows Host
Nov 15 12:59:20: vmx| HOST Windows version 6.0, build 6001, platform 2, "Service Pack 1", SMP
Nov 15 12:59:20: vmx| DICT --- USER PREFERENCES
Nov 15 12:59:20: vmx| DICT pref.autoFitFullScreen = fitHostToGuest
Nov 15 12:59:20: vmx| DICT pref.view.navBar.type = favorites
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.items.count = 7
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.item0.id = POWER_OFF
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.item1.id = SUSPEND
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.item2.id = POWER_ON
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.item3.id = RESET
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.item4.id = _SEP_
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.item5.id = PREVIEW_PLAYER
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.item6.id = PREVIEW_WS
Nov 15 12:59:20: vmx| DICT pref.mruDest0.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.mruDest0.destString =
Nov 15 12:59:20: vmx| DICT pref.mruDest0.user =
Nov 15 12:59:20: vmx| DICT pref.mruDest1.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.mruDest1.destString =
Nov 15 12:59:20: vmx| DICT pref.mruDest1.user =
Nov 15 12:59:20: vmx| DICT pref.mruDest2.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.mruDest2.destString =
Nov 15 12:59:20: vmx| DICT pref.mruDest2.user =
Nov 15 12:59:20: vmx| DICT pref.mruDest3.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.mruDest3.destString =
Nov 15 12:59:20: vmx| DICT pref.mruDest3.user =
Nov 15 12:59:20: vmx| DICT pref.mruDest4.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.mruDest4.destString =
Nov 15 12:59:20: vmx| DICT pref.mruDest4.user =
Nov 15 12:59:20: vmx| DICT pref.mruDest5.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.mruDest5.destString =
Nov 15 12:59:20: vmx| DICT pref.mruDest5.user =
Nov 15 12:59:20: vmx| DICT pref.mruDest6.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.mruDest6.destString =
Nov 15 12:59:20: vmx| DICT pref.mruDest6.user =
Nov 15 12:59:20: vmx| DICT pref.mruDest7.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.mruDest7.destString =
Nov 15 12:59:20: vmx| DICT pref.mruDest7.user =
Nov 15 12:59:20: vmx| DICT webUpdate.checkPeriod = weekly
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.proj.items.count = 4
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.proj.item0.id = ADD_VM
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.proj.item1.id = POLICIES
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.proj.item2.id = PKG_NEW
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.proj.item3.id = EDIT_SETTINGS
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.snapshot.items.count = 3
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.snapshot.item0.id = SNAPSHOT
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.snapshot.item1.id = REVERT
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.snapshot.item2.id = SNAPSHOT_MANAGER
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.items.count = 6
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.item0.id = FAVORITES
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.item1.id = FULL_SCREEN
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.item2.id = QUICK_SWITCH
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.item3.id = _SEP_
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.item4.id = SUMMARY
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.item5.id = CONSOLE
Nov 15 12:59:20: vmx| DICT webUpdate.checkLast = 1226250667
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.menu.position.ix = 0
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.menu.position.newLine = TRUE
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.position.ix = 1
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.position.newLine = TRUE
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.power.position.length = 118
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.snapshot.position.ix = 2
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.snapshot.position.length = 87
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.position.ix = 3
Nov 15 12:59:20: vmx| DICT pref.view.toolbars.view.position.length = 153
Nov 15 12:59:20: vmx| DICT pref.console.openedObj0.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.console.openedObj0.name = Home
Nov 15 12:59:20: vmx| DICT pref.console.openedObj.maxNum = 4
Nov 15 12:59:20: vmx| DICT pref.placement.left = 69
Nov 15 12:59:20: vmx| DICT pref.placement.top = 69
Nov 15 12:59:20: vmx| DICT pref.placement.right = 1089
Nov 15 12:59:20: vmx| DICT pref.placement.bottom = 806
Nov 15 12:59:20: vmx| DICT pref.console.currentObj.path = /vm/#040e7ea6035e7e0b/
Nov 15 12:59:20: vmx| DICT pref.console.currentObj.type = vm
Nov 15 12:59:20: vmx| DICT pref.console.openedObj1.present = FALSE
Nov 15 12:59:20: vmx| DICT pref.console.openedObj1.name = Windows XP Professional
Nov 15 12:59:20: vmx| DICT pref.console.openedObj2.present = TRUE
Nov 15 12:59:20: vmx| DICT pref.console.openedObj2.type = home
Nov 15 12:59:20: vmx| DICT pref.console.openedObj2.path =
Nov 15 12:59:20: vmx| DICT pref.console.openedObj2.file =
Nov 15 12:59:20: vmx| DICT pref.console.openedObj2.name = Home
Nov 15 12:59:20: vmx| DICT pref.console.openedObj1.type = vm
Nov 15 12:59:20: vmx| DICT pref.console.openedObj1.path = /vm/#040e7ea6035e7e0b/
Nov 15 12:59:20: vmx| DICT pref.console.openedObj1.file = f:\Virtual Machines\Windows XP Professional\Windows XP Professional.vmx
Nov 15 12:59:20: vmx| DICT pref.console.openedObj3.present = TRUE
Nov 15 12:59:20: vmx| DICT pref.console.openedObj3.type = vm
Nov 15 12:59:20: vmx| DICT pref.console.openedObj3.path = /vm/#040e7ea6035e7e0b/
Nov 15 12:59:20: vmx| DICT pref.console.openedObj3.file = f:\Virtual Machines\Windows XP Professional\Windows XP Professional.vmx
Nov 15 12:59:20: vmx| DICT pref.console.openedObj3.name = Windows XP Professional
Nov 15 12:59:20: vmx| DICT hints.hideAll = FALSE
Nov 15 12:59:20: vmx| DICT pref.view.homepage = FALSE
Nov 15 12:59:20: vmx| DICT pref.console.openedObj0.type = home
Nov 15 12:59:20: vmx| DICT pref.console.openedObj0.path = /vm/#040e7ea6035e7e0b/
Nov 15 12:59:20: vmx| DICT pref.console.openedObj0.file = f:\Virtual Machines\Windows XP Professional\Windows XP Professional.vmx
Nov 15 12:59:20: vmx| DICT hint.vmui.poweroff = FALSE
Nov 15 12:59:20: vmx| DICT hint.hostWin32.cpuSpeedMismatch = FALSE
Nov 15 12:59:20: vmx| DICT hint.vmui.reset = FALSE
Nov 15 12:59:20: vmx| DICT hint.interactiveLogin = FALSE
Nov 15 12:59:20: vmx| DICT --- USER DEFAULTS
Nov 15 12:59:20: vmx| DICT --- HOST DEFAULTS
Nov 15 12:59:20: vmx| DICT authd.client.port = 902
Nov 15 12:59:20: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Nov 15 12:59:20: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Nov 15 12:59:20: vmx| DICT datastore.name = local
Nov 15 12:59:20: vmx| DICT datastore.localpath = D:\Virtual Machines\
Nov 15 12:59:20: vmx| DICT --- SITE DEFAULTS
Nov 15 12:59:20: vmx| DICT authd.client.port = 902
Nov 15 12:59:20: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Nov 15 12:59:20: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Nov 15 12:59:20: vmx| DICT datastore.name = local
Nov 15 12:59:20: vmx| DICT datastore.localpath = D:\Virtual Machines\
Nov 15 12:59:20: vmx| DICT --- COMMAND LINE
Nov 15 12:59:20: vmx| DICT --- CONFIGURATION
Nov 15 12:59:20: vmx| DICT config.version = 8
Nov 15 12:59:20: vmx| DICT virtualHW.version = 4
Nov 15 12:59:20: vmx| DICT numvcpus = 2
Nov 15 12:59:20: vmx| DICT scsi0.present = TRUE
Nov 15 12:59:20: vmx| DICT memsize = 528
Nov 15 12:59:20: vmx| DICT ide0:0.present = TRUE
Nov 15 12:59:20: vmx| DICT ide0:0.fileName = F:\VmWareVirtualStorage\Windows XP Professional.vmdk
Nov 15 12:59:20: vmx| DICT ide1:0.present = TRUE
Nov 15 12:59:20: vmx| DICT ide1:0.fileName = G:
Nov 15 12:59:20: vmx| DICT ide1:0.deviceType = cdrom-raw
Nov 15 12:59:20: vmx| DICT floppy0.fileName = A:
Nov 15 12:59:20: vmx| DICT Ethernet0.present = TRUE
Nov 15 12:59:20: vmx| DICT displayName = Windows XP Professional
Nov 15 12:59:20: vmx| DICT guestOS = winxppro
Nov 15 12:59:20: vmx| DICT priority.grabbed = normal
Nov 15 12:59:20: vmx| DICT priority.ungrabbed = normal
Nov 15 12:59:20: vmx| DICT ide1:0.autodetect = FALSE
Nov 15 12:59:20: vmx| DICT floppy0.startConnected = TRUE
Nov 15 12:59:20: vmx| DICT usb.present = TRUE
Nov 15 12:59:20: vmx| DICT ide0:0.redo =
Nov 15 12:59:20: vmx| DICT ethernet0.addressType = generated
Nov 15 12:59:20: vmx| DICT uuid.location = 56 4d 47 97 49 46 7d 2f-b4 80 7f 1b 17 40 b0 23
Nov 15 12:59:20: vmx| DICT uuid.bios = 56 4d 47 97 49 46 7d 2f-b4 80 7f 1b 17 40 b0 23
Nov 15 12:59:20: vmx| DICT checkpoint.vmState = windows xp professional.vmss
Nov 15 12:59:20: vmx| DICT ethernet0.generatedAddress = 00:0c:29:40:b0:23
Nov 15 12:59:20: vmx| DICT ethernet0.generatedAddressOffset = 0
Nov 15 12:59:20: vmx| DICT ide1:0.startConnected = TRUE
Nov 15 12:59:20: vmx| DICT tools.syncTime = FALSE
Nov 15 12:59:20: vmx| DICT workingDir = .
Nov 15 12:59:20: vmx| DICT gui.powerOnAtStartup = TRUE
Nov 15 12:59:20: vmx| DICT --- USER DEFAULTS
Nov 15 12:59:20: vmx| DICT --- HOST DEFAULTS
Nov 15 12:59:20: vmx| DICT authd.client.port = 902
Nov 15 12:59:20: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Nov 15 12:59:20: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Nov 15 12:59:20: vmx| DICT datastore.name = local
Nov 15 12:59:20: vmx| DICT datastore.localpath = D:\Virtual Machines\
Nov 15 12:59:20: vmx| DICT --- SITE DEFAULTS
Nov 15 12:59:20: vmx| DICT authd.client.port = 902
Nov 15 12:59:20: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Nov 15 12:59:20: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Nov 15 12:59:20: vmx| DICT datastore.name = local
Nov 15 12:59:20: vmx| DICT datastore.localpath = D:\Virtual Machines\
Nov 15 12:59:20: vmx| DICT --- GLOBAL SETTINGS
Nov 15 12:59:20: vmx| Msg_Hint: msg.guestos.xp (shown)
Nov 15 12:59:20: vmx| HINT(no connection): The Microsoft Windows XP product activation feature creates a key based on the virtual hardware in the virtual machine where it is installed. Changes in the virtual machine configuration may require you to reactivate the guest operating system. To minimize those changes, be sure to set the final memory size for the virtual machine and install VMware Tools before you activate Windows XP.
Nov 15 12:59:20: vmx| For more information about Windows XP product activation and virtual machines see our Web site at "http://www.vmware.com/info?id=21".
Nov 15 12:59:20: vmx|
Nov 15 12:59:20: vmx| Msg_Hint: msg.hostw32.wrongNTversion (shown)
Nov 15 12:59:20: vmx| Create Memory BIO succeeded.
Nov 15 12:59:20: vmx| Create Memory BIO succeeded.
Nov 15 12:59:20: vmx| Accepted new connection at 540 for thread servercontrol (0x1f2350)
Nov 15 12:59:20: vmx| VUINewControlConnection: before slow ACL gunk (bug 63252).
Nov 15 12:59:20: vmx| ACL: Thread from (SYSTEM) gets full perms
Nov 15 12:59:20: vmx| VUINewControlConnection: after slow ACL gunk (bug 63252).
Nov 15 12:59:20: vmx| VUI: A new VMControl client connected.
Nov 15 12:59:20: vmx| IPC version negotiation version: VMX returning 2.1 to servercontrol
Nov 15 12:59:20: vmx| IPC vmcontrol-temp version: VMX returning 11.4 to servercontrol that tried 11.4
Nov 15 12:59:21: vmx| WSSCAN: reserved mem (in MB) min=32 max=3200 recommended=3200
Nov 15 12:59:21: vmx| hostMem=3328 maxAllowedAll=-1 maxAllowedVM=3600
Nov 15 12:59:21: vmx| totOverhead=16
Nov 15 12:59:21: vmx| WSSCAN: used rec mem (in MB) 3200
Nov 15 12:59:21: vmx| WSSCAN: Overhead 141555 paged 11617 nonpaged 4096 maxFBSize
Nov 15 13:03:32: vmx| WSSCAN 1 2 653235 772668 819200 653235 50 0
Nov 15 13:03:49: vmx| LICENSE using: 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware Server\License.gsx.3.0-00'
Nov 15 13:03:49: vmx| STATDECLGROUP stats Root "" null
Nov 15 13:03:50: vmx| Host CPUID features: version 0x10678 id1.edx 0xbfebfbff id1.ecx 0x8e3fd id81.edx 0x20100000 id81.ecx 0x1
Nov 15 13:03:50: vmx| CPU.cpuFeatures = 0xb971ff37
Nov 15 13:03:50: vmx| CPUID after masking: version 0x10678 id1.edx 0xfebfbff id1.ecx 0x8a255 id81.edx 0x20100800 id81.ecx 0x1 id88.ecx 0x0
Nov 15 13:03:50: vmx| CPU.cpuFeatures = 0x9871ff33
Nov 15 13:03:50: vmx| APIC: Local APIC at 0xfee00000
Nov 15 13:03:54: vmx| KHZEstimate 3172530
Nov 15 13:03:54: vmx| MHZEstimate 3173
Nov 15 13:03:54: vmx| NumVCPUs 2
Nov 15 13:03:54: vmx| UUID: location-UUID is 56 4d e2 ee 54 dd ef 2b-ad 98 db fd 55 75 8c 6d
Nov 15 13:03:55: vmx| UUID: canonical path is f:\virtual machines\windows xp professional\windows xp professional.vmx
Nov 15 13:03:55: vmx| UUID: location-UUID is 56 4d 47 97 49 46 7d 2f-b4 80 7f 1b 17 40 b0 23
Nov 15 13:03:55: vmx| MM: Using partialmap, 135168 pages AC 0 CE 1 TM 0 DOHU 0
Nov 15 13:03:56: vmx| MStat: Creating Stat vm.cpuusage
Nov 15 13:03:56: vmx| MStat: Creating Stat vm.ram
Nov 15 13:03:56: vmx| MStat: Creating Stat vm.uptime
Nov 15 13:03:59: vmx| DISK: OPEN ide0:0 'F:\VmWareVirtualStorage\Windows XP Professional.vmdk' persistent R[(null)]
Nov 15 13:04:01: vmx| DISKLIB-DSCPTR: Opened [0]: "Windows XP Professional-flat.vmdk" 0 (0xa)
Nov 15 13:04:01: vmx| DISKLIB-LINK : Opened 'F:\VmWareVirtualStorage\Windows XP Professional.vmdk' (0xa): monolithicFlat, 16777216 sectors / 8192 Mb.
Nov 15 13:04:01: vmx| DISKLIB-LIB : Opened "F:\VmWareVirtualStorage\Windows XP Professional.vmdk" (flags 0xa).
Nov 15 13:04:01: vmx| DISK: OPEN 'F:\VmWareVirtualStorage\Windows XP Professional.vmdk' Geo (16383/16/63) BIOS Geo (1044/255/63) freeSpace=62728Mb
Nov 15 13:04:05: vmx| TimeTracker host to guest rate conversion 35065593113268 @ 3172530000Hz -> 35065593113268 @ 3172530000Hz
Nov 15 13:04:05: vmx| TimeTracker host to guest rate conversion ((x * 2147483648) >> 31) + 0
Nov 15 13:04:05: vmx| IPC Socket write error 10053
Nov 15 13:04:06: vmx| VMX IPC closed the connection with thread servercontrol (001F2350)
Nov 15 13:04:06: vmx| VMX: Remote VMControl client servercontrol disconnected unexpectedly.
Nov 15 13:04:06: vmx| VUI iteration interrupted
Nov 15 13:04:06: vmx| MStat: Creating Stat ide0:0.bytesread
Nov 15 13:04:07: vmx| MStat: Creating Stat ide0:0.byteswritten
Nov 15 13:04:07: vmx| MStat: Creating Stat ide1:0.bytesread
Nov 15 13:04:07: vmx| MStat: Creating Stat ide1:0.byteswritten
Nov 15 13:04:07: vmx| SCSI0: UNTAGGED commands will be converted to ORDER tags.
Nov 15 13:04:07: vmx| MStat: Creating Stat vm.heartbeat
Nov 15 13:04:08: vmx| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 15 13:04:08: vmx| TOOLS INSTALL initializing state to IDLE on power on.
Nov 15 13:04:20: vmx| USB: Initializing UHCI host controller
Nov 15 13:04:20: vmx| USB: Initializing USB Generic backend
Nov 15 13:04:21: vmx| USBGW: Connected to HCMON version 1.1
Nov 15 13:04:21: vmx| Unrecognized command "tweakthread 5740 5592".
Nov 15 13:04:25: vmx| VLANCE: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks
Nov 15 13:04:25: vmx| MStat: Creating Stat ethernet0.bytesread
Nov 15 13:04:25: vmx| MStat: Creating Stat ethernet0.byteswritten
Nov 15 13:04:25: vmx| Ethernet0 MAC Address: 00:0c:29:40:b0:23
Nov 15 13:04:25: vmx| VMXNET: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks, dontClusterSize is 128
Nov 15 13:04:25: vmx| E1000: checksum cycles/kB: C=1637 asm=1074
Nov 15 13:04:25: vmx| VirtualProtect MapProtectMem(0xe90000,0x1000) returns 0x1e7
Nov 15 13:04:25: vmx| Can't read-only monitor pages from 0x00E90000 to 0x00E91000
Nov 15 13:04:25: vmx| VirtualProtect MapProtectMem(0xe92000,0x1000) returns 0x1e7
Nov 15 13:04:25: vmx| Can't read-only monitor pages from 0x00E92000 to 0x00E93000
Nov 15 13:04:25: vmx| VirtualProtect MapProtectMem(0xe94000,0x0) returns 0x57
Nov 15 13:04:25: vmx| Can't read-only monitor pages from 0x00E94000 to 0x00E94000
Nov 15 13:04:25: vmx| CPT: Restoring checkpoint f:\virtual machines\windows xp professional\windows xp professional.vmss
Nov 15 13:04:25: vmx| DUMPER: restoring checkpoint version 8
Nov 15 13:04:26: vmx| checkpointCPUID: cpt vendor GenuntelineI host vendor GenuntelineI
Nov 15 13:04:26: vmx| checkpointCPUID: cpt family 06 model 176 host family 06 model 176
Nov 15 13:04:26: vmx| checkpointCPUID: cpt id1.ecx 8a255 id1.edx febfbff id81.ecx 1 id81.edx 20100000
Nov 15 13:04:26: vmx| checkpointCPUID: host id1.ecx 8a255 id1.edx febfbff id81.ecx 1 id81.edx 20100000
Nov 15 13:04:26: vmx| DUMPER: item eip [1,-1] in group cpu not used
Nov 15 13:04:26: vmx| DUMPER: item eip [0,-1] in group cpu not used
Nov 15 13:04:26: vmx| restoring Snapshot
Nov 15 13:04:26: vmx| DUMPER: item cfgFile [-1,-1] in group Snapshot not used
Nov 15 13:04:26: vmx| DUMPER: item nvramFile [-1,-1] in group Snapshot not used
Nov 15 13:04:26: vmx| restoring memory
Nov 15 13:04:26: vmx| Mapped mainmem as pageable
Nov 15 13:04:26: vmx| Msg_Reset:
Nov 15 13:04:26: vmx| ----------------------------------------
Nov 15 13:04:26: vmx| Opened paging file f:\virtual machines\windows xp professional\windows xp professional.vmem
Nov 15 13:04:26: vmx| Lazy Restore with prefetch of 128 MB
Nov 15 13:04:26: vmx| Msg_Hint: msg.mainmem.lazyResumeHint (shown)
Nov 15 13:04:26: vmx| HINT(no connection): Background snapshots are enabled so you can use a virtual machine while it is being resumed. If you have slow disks, performance may degrade while the operation is in progress. This behavior can be controlled under Host > Settings > Priority.
Nov 15 13:04:26: MMPageWalker| Entering MM LazySave Loop
Nov 15 13:04:26: vmx| Unrecognized command "tweakthread 4460 5592".
Nov 15 13:05:11: vmx| restoring MStats
Nov 15 13:05:11: vmx| restoring pic
Nov 15 13:05:11: vmx| restoring TimeTracker
Nov 15 13:05:11: vmx| TimeTracker host to guest rate conversion 35065593113268 @ 3172530000Hz -> 37786539845903 @ 3166306000Hz
Nov 15 13:05:11: vmx| TimeTracker host to guest rate conversion ((x * 4286541252) >> 32) + 2789739859590
Nov 15 13:05:11: vmx| restoring Floppy
Nov 15 13:05:11: vmx| restoring GuestMsg
Nov 15 13:05:11: vmx| restoring GuestRpc
Nov 15 13:05:11: vmx| restoring PCI
Nov 15 13:05:11: vmx| restoring Cs440bx
Nov 15 13:05:11: vmx| DUMPER: item drb [1,-1] in group Cs440bx not used
Nov 15 13:05:11: vmx| DUMPER: item drb [0,-1] in group Cs440bx not used
Nov 15 13:05:11: vmx| restoring ide1:0
Nov 15 13:05:11: vmx| restoring ide0:0
Nov 15 13:05:11: vmx| restoring vide
Nov 15 13:05:11: vmx| DUMPER: BlockItem monbuf [0, -1] not found
Nov 15 13:05:11: vmx| DUMPER: BlockItem monbuf [1, -1] not found
Nov 15 13:05:11: vmx| DUMPER: item setMultiple [0,-1] in group vide not used
Nov 15 13:05:11: vmx| restoring SCSI0
Nov 15 13:05:11: vmx| restoring Timer
Nov 15 13:05:11: vmx| restoring Tools
Nov 15 13:05:11: vmx| restoring Tools Install
Nov 15 13:05:11: vmx| TOOLS INSTALL setting state to 0 on restore.
Nov 15 13:05:11: vmx| restoring MKSVMX
Nov 15 13:05:11: vmx| DUMPER: item imageData [-1,-1] in group MKSVMX not used
Nov 15 13:05:11: vmx| restoring VGA
Nov 15 13:05:11: vmx| restoring DMA
Nov 15 13:05:11: vmx| restoring BackdoorAPM
Nov 15 13:05:11: vmx| restoring CMOS
Nov 15 13:05:11: vmx| restoring FlashRam
Nov 15 13:05:11: vmx| restoring A20
Nov 15 13:05:11: vmx| restoring Keyboard
Nov 15 13:05:11: vmx| restoring backdoorAbsMouse
Nov 15 13:05:11: vmx| restoring SIO
Nov 15 13:05:11: vmx| restoring serial0
Nov 15 13:05:11: vmx| restoring serial1
Nov 15 13:05:11: vmx| restoring serial2
Nov 15 13:05:11: vmx| restoring serial3
Nov 15 13:05:11: vmx| restoring parallel0
Nov 15 13:05:11: vmx| restoring parallel1
Nov 15 13:05:11: vmx| restoring parallel2
Nov 15 13:05:11: vmx| restoring SVGA
Nov 15 13:05:11: vmx| SVGA phys sizes: 2360x1770x32 offset 0 fb 0x01000000
Nov 15 13:05:11: vmx| SVGA compatible geometry on checkpoint restore
Nov 15 13:05:11: vmx| SVGA old geometry 2360x1770, max size = 16777216
Nov 15 13:05:11: vmx| SVGA new geometry 2360x1770, max size = 16777216
Nov 15 13:05:13: vmx| restoring USB
Nov 15 13:05:13: vmx| restoring Ethernet0
Nov 15 13:05:13: vmx| restoring monitorLate
Nov 15 13:05:13: vmx| restoring devices
Nov 15 13:05:13: vmx| DUMPER: Dumper_EndRestore: update hdr magic
Nov 15 13:05:13: vmx| VMX_PowerOn: ModuleTable_PowerOn = 1
Nov 15 13:05:13: vmx| VMX setting maximum IPC write buffers to 0 packets, 0 bytes
Nov 15 13:05:13: mks| Async MKS thread is alive
Nov 15 13:05:13: vmx| Unrecognized command "tweakthread 2608 5592".
Nov 15 13:05:13: vmx| Unrecognized command "tweakthread 752 5592".
Nov 15 13:05:13: vcpu-0| APIC: version = 0x14, max LVT = 5
Nov 15 13:05:13: vcpu-0| APIC: LDR = 0x2000000, DFR = 0xffffffff
Nov 15 13:05:13: mks| MKS remote display status changed, disabling remoteoptimizations
Nov 15 13:05:14: vcpu-0| PShare: enabled 1, scanRate 32, checkRate 16
Nov 15 13:05:14: vcpu-0| guestCpuFeatures = 0x9871ff33
Nov 15 13:05:14: vcpu-0| Init modules.
Nov 15 13:05:14: vcpu-0| DISKUTIL: ide0:0 : capacity=16777216
Nov 15 13:05:14: vcpu-0| Cpt monModules(3).
Nov 15 13:05:14: vcpu-0| Done Cpt monModules(3).
Nov 15 13:05:14: vmx| Msg_Post: Warning
Nov 15 13:05:14: vmx| [msg.vnet.bridgeDown] The network bridge on device VMnet0 is temporarily down because the bridged Ethernet interface is down. The virtual machine may not be able to communicate with the host or with other machines on your network.
Nov 15 13:05:14: vmx| ----------------------------------------
Nov 15 13:05:14: vmx| POST(no connection): The network bridge on device VMnet0 is temporarily down because the bridged Ethernet interface is down. The virtual machine may not be able to communicate with the host or with other machines on your network.
Nov 15 13:05:14: vmx|
Nov 15 13:05:14: vmx| VNET: Notification enabled for Ethernet0
Nov 15 13:05:20: vmx| FLOPPYLIB-LIB : Sync: syserror Unzulässige Funktion.
Nov 15 13:05:20: vcpu-0| INTELRDMSR(0x8b) = 0x0000060b00000000
Nov 15 13:05:20: vcpu-0| INTELRDMSR(0x17) = 0x040000008884c91d
Nov 15 13:05:20: vcpu-0| sz=3104736
Nov 15 13:05:20: vmx| Unrecognized command "tweakthread 1128 5592".
Nov 15 13:05:20: vcpu-1| APIC: version = 0x14, max LVT = 5
Nov 15 13:05:20: vcpu-1| APIC: LDR = 0x2000000, DFR = 0xffffffff
Nov 15 13:05:20: vcpu-1| guestCpuFeatures = 0x9871ff33
Nov 15 13:05:20: vcpu-1| Init modules.
Nov 15 13:05:20: vcpu-1| INTELRDMSR(0x8b) = 0x0000060b00000000
Nov 15 13:05:20: vcpu-1| INTELRDMSR(0x17) = 0x040000008884c91d
Nov 15 13:05:20: vcpu-1| sz=3104736
Nov 15 13:05:20: vcpu-0| vmm32 initialized: Releasebuild-126538. cflags: 0x00000002.01803000.00000054
Nov 15 13:05:20: vcpu-0| Restoring VM
Nov 15 13:05:20: vcpu-1| vmm32 initialized: Releasebuild-126538. cflags: 0x00000002.01803000.00000054
Nov 15 13:05:20: vcpu-1| Restoring VM
Nov 15 13:05:20: vmx| VMMouse: restored checkpoint state was absolute, notifying MKS
Nov 15 13:05:20: vmx| MKS switching absolute mouse on
Nov 15 13:05:20: vcpu-0| Sync monModules(4).
Nov 15 13:05:20: vcpu-0| Done Sync monModules(4).
Nov 15 13:05:20: vcpu-0| SVGA: Registering IOSpace at 0x1420 (0x0)
Nov 15 13:05:20: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xec000000(0xec000000)
Nov 15 13:05:24: mks| MKS remote display status changed, enabling remoteoptimizations
Nov 15 13:05:25: vcpu-1| GuestRpc: Channel 1, registration number 2, guest application toolbox.
Nov 15 13:05:25: vcpu-1| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 15 13:05:39: vcpu-0| AIOGNRC: Starting 2 I/O threads.
Nov 15 13:05:39: vcpu-0| Unrecognized command "tweakthread 1156 5592".
Nov 15 13:05:39: vcpu-0| Unrecognized command "tweakthread 5404 5592".
Nov 15 13:05:39: vcpu-0| Winnt_CDROM: 'G:' Length 24 MaxTransferLength 131072 MaxPhysPages 33
Nov 15 13:05:39: vcpu-0| Winnt_CDROM: AlignMask 0x1 AsyncEvent TaggedQ ScanUp DMA
Nov 15 13:05:39: vcpu-0| Guest: toolbox: Version: build-126538
Nov 15 13:05:39: vcpu-0| TOOLS setting the tools version to '6536'
Nov 15 13:05:39: vcpu-1| TOOLS unified loop capability requested by 'toolbox'; now sending options via TCLO
Nov 15 13:05:41: vcpu-1| TOOLS unified loop capability requested by 'toolbox-dnd'; now sending options via TCLO
Nov 15 13:05:43: vcpu-0| GuestRpc: Channel 0, registration number 2, guest application toolbox-dnd.
Nov 15 13:05:43: vcpu-0| DISKUTIL: ide0:0 : toolsVersion = 6536
Nov 15 13:05:50: vcpu-1| MKS Backdoor get pointer: first time, notify tools are running
Nov 15 13:06:12: mks| MKS set guest selection request with invalid state 2
Nov 15 13:06:32: vcpu-1| VIDE: Curr CHS info cyls: 17475 heads: 15 sects: 63 lba_cap: 16777216
Nov 15 13:06:33: vcpu-0| UHCI: HCReset
Nov 15 13:06:33: vcpu-0| UHCI: Global Reset
Nov 15 13:07:50: MMPageWalker| Exit MM Lazy Loop
Nov 15 13:08:48: mks| MKS set guest selection request with invalid state 2
Nov 15 13:10:10: mks| MKS set guest selection request with invalid state 2

Verfasst: 15.11.2008, 13:32
von Dayworker
Ähem, ja ne is klar...

Du hast einen Checkpoint/Snapshot gemacht und dann Hardware (AVM-Netzwerkkarte) in einer laufenden VM entfernt :shock:
Kein Wunder das sich die VM seltsam verhält.

Was verbirgt sich denn hinter dem Logitech-Gerät?

Sag mal'n bisken mehr zu deinem Host-System. Ich verstehe irgendwie nicht, weshalb du die Netzwerkverbindung über den Fritz-Wlanstick direkt in der VM machst und nicht die vorhandene Netzwerkkarte im Host einfach brückst.

Verfasst: 15.11.2008, 13:34
von juetaetzs
hallo,
also habe jezt durch zufall virtual box gestartet
das erkennt wuf einmal meinen scanner und das scannen funktioniert
keine ahnung warum
ich werde das mit vmware jetzt ruhen lassen
danke dir für die mühe...
grüße
jt