Hallo
langsam bin ich wirklich verzweifelt wir haben folgende Situation:
Die Netzwerkperformance ist auf vmesx-host2 mit 2,03 Gbit 50% weniger als auf vmesx-host1 mit 4,8Gbit. Beide Maschinen sind in der Hard - und Software Settings identisch.
Wenn wir eine VMware-Guest (Debian) auf den vmesx-host1 testen, haben wir eine Netzwerkperformance von 4 Gbit.
Wenn wir die gleiche Maschine VMware-Guest (Debian) von vmesx-host1 auf vmesx-host2 mit VMware Motion migrieren und anschließend testen, haben wir eine Netzwerkperformance von 1,5 Gbit.
Durchgeführte Massnahmen:
Test wurde durchgeführt mit einer weiteren Physikalischen VMware-Maschine im VM-Cluster vmesx8 und einen VM-Guest mit installierten Debian7 und VMware-Tools 5.5 installiert.
vmesx8 (im Cluster vCenter) Iperf -s >> vmesx-host1 (Guest-VM Debian mit Vmwaretools 5.5 installiert) Iperf -c == 4, 8Gbit OK!
Migration der Guest-VM-Debian von vmesx-host1 auf vmesx-host2.
vmesx8 (im Cluster vCenter) Iperf -s >> vmesx-host2 (Guest-VM Debian mit Vmwaretools 5.5 installiert) Iperf -c == 1,5 Gbit inakzeptabel.
- VMware vCenter 5.5.0 Applikation Server Suse Linux (Download VMware Portal)
- VMware Version 5.5.0 HP-Customize Image auf beiden vmesx-host2 und vmesx-host1 identisch!
- Network Settings auf VMware überprüft auf beiden vmesx-host2 und vmesx-host1 identisch!
- vSwitch0 Settings auf beiden vmesx-host2 und vmesx-host1 identisch!
- vManagement Network Settings auf beiden vmesx-host2 und vmesx-host1 identisch!
- VMware-Tools Update auf 5.5 und installiert.
- Patchlevel 1474528 auf beiden vmesx-host2 und vmesx-host1 identisch!
- Intel 10Gbit Karte ist auf beiden vmesx-host2 und vmesx-host1 im gleichen SLOT.
- Karte wurde am vmesx-host2 getauscht gegen eine gleiche Ersatzkarte der gleichen Charge/Bestellung.
- Die Verkabelung wurde am vmesx-host 2 und Brocade Switch wurde ausgetauscht.
- Die Ports am 10GBit Brocade Switch wurden gewechselt.
- VMware Lizenz ist auf beiden vmesx-host2 und vmesx-host1 aktiviert.
Mit keiner der durchgeführten Maßnahmen konnte eine Netzwerkperformance von über 2 Gbit erreicht werden.
Wie ist das möglich, wenn alle Settings zu vmesx-host1 identisch sind?
vmesx-host1:
VMware Upgrade von 5.1 auf 5.5 durchgeführt um 8-way virtual CPU in der neuen 5.5-Version zu umgehen und eine einzelne VM mit 24vCPUs laufen lassen zu können ohne auf Enterprise Lizenz upgraden zu müssen.
Auf 5.1 am Host1 ist eine Intel 10GB X-520-SR2 Adapter, SR-Fiber 2x LC verbaut die in der Hardwarekompatibilitätsliste von VMware enthalten ist.
E10G42BFSR – Intel® Ethernet Server Adapter X520-SR2
http://partnerweb.vmware.com/comp_guide ... 8&vcl=true
Wir nutzen das HP Customize Image 5.1 bzw. für den Upgrade das 5.5
http://h18004.www1.hp.com/products/serv ... image.html
Von 5.1 wurde ein Upgrade auf 5.5 durchgeführt keine neuinstallation!
VMware Lizenz wurde aktiviert!
Hardwarespezifikation Host1:
* HP ProLiant DL580 G7 (E7) Configure-to-order S
* 1x HP DL580 G7 Intel Xeon E7-4830 (2.13GHz/8- core/24MB/105W) FIO 2-processor Kit
* 2x HP DL580 G7 Intel Xeon E7-4830 (2.13GHz/8- core/24MB/105W) FIO 2-processor Kit
* 16x HP 8GB 1x8GB PC3-10600 Registered CAS 9 Dual Rank x4 DRAM Memory Kit
* 4x HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
* 1x HP StorageWorks Dual Channel 8 Gb/s 82Q PCI-E-to- Fibre Channel Host Bus Adapte
* 4x HP 1200 Watt Hot Plug redundante Stromversorgung
* 4x HP ProLiant Essentials Integrated Lights-Out Advanced Pack - 1 Server Lizenz ohne Media mit 1 Jahr 24x7 Technical Support und Updates
* 1x 10Gbit E10G42BFSR – Intel® Ethernet Server Adapter X520-SR2
vmesx-Host2:
VMware Neuinstallation mit VMware 5.5 durchgeführt um 8-way virtual CPU in der neuen 5.5-Version zu umgehen und eine einzelne VM mit 24vCPUs laufen lassen zu können ohne auf Enterprise Lizenz upgraden zu müssen.
Auf 5.1 am Host1 ist eine Intel 10GB X-520-SR2 Adapter, SR-Fiber 2x LC verbaut die in der Hardwarekompatibilitätsliste von VMware enthalten ist.
E10G42BFSR – Intel® Ethernet Server Adapter X520-SR2
http://partnerweb.vmware.com/comp_guide ... 8&vcl=true
Wir nutzen das HP Customize Image 5.5
http://h18004.www1.hp.com/products/serv ... image.html
Am vmesx-host2 wurde eine Neuinstallation auf 5.5 durchgeführt.
VMware Lizenz wurde aktiviert!
Hardwarespezifikation Host2:
* HP ProLiant DL580 G7 (E7) Configure-to-order Server
* 1x HP DL580 G7 Intel Xeon E7-4830 (2.13GHz/8-core/24MB/105W) FIO 2-processor Kit
* 2x HP DL580 G7 Intel Xeon E7-4830 (2.13GHz/8-core/24MB/105W) Processor Kit
* 16x HP 8GB 1x8GB PC3-10600 Registered CAS 9 Dual Rank x4 DRAM Memory Kit
* 4x HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
* 4x HP 1200 Watt Hot Plug redundante Stromversorgung HP ProLiant Essentials Integrated Lights-Out Advanced
* Pack - 1 Server Lizenz ohne Media mit 1 Jahr 24x7 Technical Support und Updates
* 1x 10Gbit E10G42BFSR – Intel® Ethernet Server Adapter X520-SR2
Mit freundlichen Grüßen
ZaunerA
Die Foren-SW läuft ohne erkennbare Probleme. Sollte doch etwas nicht funktionieren, bitte gerne hier jederzeit melden und wir kümmern uns zeitnah darum. Danke!
VMware 5.5 10Gbit Netzwerk Performance Problem 2Gbit durchsa
Hallo,
ist die Firmware auf beiden Karten die gleiche?
Firmwarestände der Server? HP SUM mal durchgeführt?
Irgendwelche Einstellungen im BIOS geändert/anders?
Sind am Switch die Ports gleich konfiguriert?
Da vmesx-host1 von 5.1 auf 5.5 per Update angehoben wurde und vmesx-host2 nicht kann es dort Unterschiede bei den Treiberversionen geben. Welche VIBs-Versionen der Treiber sind aktuell geladen? "esxcli software vib list", oder per vsphere cli "esxcli -s 10.11.12.13 -u root software vib list"
ist die Firmware auf beiden Karten die gleiche?
Firmwarestände der Server? HP SUM mal durchgeführt?
Irgendwelche Einstellungen im BIOS geändert/anders?
Sind am Switch die Ports gleich konfiguriert?
Da vmesx-host1 von 5.1 auf 5.5 per Update angehoben wurde und vmesx-host2 nicht kann es dort Unterschiede bei den Treiberversionen geben. Welche VIBs-Versionen der Treiber sind aktuell geladen? "esxcli software vib list", oder per vsphere cli "esxcli -s 10.11.12.13 -u root software vib list"
Hallo,
Ich habe diese jetzt mittels esx vib update mal Upgegradet auf die neueste Version vom VMware Cards Support.
Host2
VMwareCertified 2014-02-04
net-ixgbe 3.19.1-1OEM.550.0.0.1331820 Intel
Host1
VMwareCertified 2014-02-04
net-ixgbe 3.15.1.8-1OEM.550.0.0.1198611 Intel
Test nochmals mit iperf durchgeführt und keine Verbesserung spürbar. Es sind immer noch nur 1,6Gbit am Host2.
Erledigt!
keine alles Identisch zu Host1
Ja die Ports am 10Gbit Switch sind alle identisch.
Bin mit meinem Latein am Ende.
die Firmware auf beiden Karten ist die gleiche?
Ich habe diese jetzt mittels esx vib update mal Upgegradet auf die neueste Version vom VMware Cards Support.
"Da vmesx-host1 von 5.1 auf 5.5 per Update angehoben wurde und vmesx-host2 nicht kann es dort Unterschiede bei den Treiberversionen geben. Welche VIBs-Versionen der Treiber sind aktuell geladen? "esxcli software vib list", oder per vsphere cli "esxcli -s 10.11.12.13 -u root software vib list
Host2
VMwareCertified 2014-02-04
net-ixgbe 3.19.1-1OEM.550.0.0.1331820 Intel
Host1
VMwareCertified 2014-02-04
net-ixgbe 3.15.1.8-1OEM.550.0.0.1198611 Intel
Test nochmals mit iperf durchgeführt und keine Verbesserung spürbar. Es sind immer noch nur 1,6Gbit am Host2.
Firmwarestände der Server? HP SUM mal durchgeführt?
Erledigt!
Irgendwelche Einstellungen im BIOS geändert/anders?
keine alles Identisch zu Host1
Sind am Switch die Ports gleich konfiguriert?
Ja die Ports am 10Gbit Switch sind alle identisch.
Bin mit meinem Latein am Ende.
-
mbreidenbach
- Experte
- Beiträge: 1006
- Registriert: 30.10.2004, 12:41
Hallo
ich habe das nicinfo.sh Script ausgeführt:
Man sieht das auf Host2 die Nics Firmware höher ist das ist nach dem Treiber Update auch korrekt aber eine Verbesserung hat sich sowohl vorher als naher nicht eingestellt immer noch 1,5 GBit.
Die Karten sind in einem PCIe2.0 x8 Slot gesteckt und werden so auch erkannt:
Mit dmesg | grep ixgbe auf dem hosts1 und host2 entnommen:
Host1
Host2
[/list]
ich habe das nicinfo.sh Script ausgeführt:
Man sieht das auf Host2 die Nics Firmware höher ist das ist nach dem Treiber Update auch korrekt aber eine Verbesserung hat sich sowohl vorher als naher nicht eingestellt immer noch 1,5 GBit.
Die Karten sind in einem PCIe2.0 x8 Slot gesteckt und werden so auch erkannt:
Mit dmesg | grep ixgbe auf dem hosts1 und host2 entnommen:
Code: Alles auswählen
0.0: PCI Express bandwidth of 32GT/s available
2014-02-07T10:59:53.730Z cpu44:33652)<6>ixgbe 0000:0b:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
2014-02-07T10:59:53.730Z cpu44:33652)<6>ixgbe 0000:0b:00.0: 0000:0b:00.0: MAC: 2, PHY: 15, SFP+: 5, PBA No: E68785-007
2014-02-07T10:59:53.730Z cpu44:33652)<6>ixgbe 0000:0b:00.0: 90:e2:ba:4a:c0:50
2014-02-07T10:59:53.730Z cpu44:33652)<6>ixgbe 0000:0b:00.0: 0000:0b:00.0: Enabled Features: RxQ: 9 TxQ: 9 FCoE DCB
2014-02-07T10:59:53.730Z cpu44:33652)<6>ixgbe 0000:0b:00.0: 0000:0b:00.0: Intel(R) 10 Gigabit Network Connection
2014-02-07T10:59:53.732Z cpu44:33652)PCI: driver ixgbe claimed device 0000:0b:00.0
2014-02-07T10:59:53.732Z cpu44:33652)<6>ixgbe: Enabled/Disable CNA set to 1
2014-02-07T10:59:53.732Z cpu44:33652)<6>ixgbe: 0000:0b:00.1: ixgbe_check_options: CNA
Host1
Code: Alles auswählen
Network Interface Cards Information.
Name PCI Device Driver Link Speed Duplex MAC Address MTU Description
----------------------------------------------------------------------------------------
vmnic0 0000:004:00.0 nx_nic Up 1000 Full 74:46:a0:f3:9e:54 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic1 0000:004:00.1 nx_nic Up 1000 Full 74:46:a0:f3:9e:55 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic2 0000:004:00.2 nx_nic Up 1000 Full 74:46:a0:f3:9e:56 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic3 0000:004:00.3 nx_nic Down 0 Full 74:46:a0:f3:9e:57 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic4 0000:005:00.0 ixgbe Up 10000 Full 90:e2:ba:4a:bf:fc 1500 Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
vmnic5 0000:005:00.1 ixgbe Up 10000 Full 90:e2:ba:4a:bf:fd 1500 Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
NIC: vmnic0
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 100baseT/Full, 1000baseT/Full
Auto Negotiation: true
Cable Type: Twisted Pair
Current Message Level: 5
Driver Info:
NICDriverInfo:
Bus Info: 0000:04:00.0
Driver: nx_nic
Firmware Version: 4.0.591
Version: 5.5.634
Link Detected: true
Link Status: Up
Name: vmnic0
PHY Address: 0
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: TP
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: true
Transceiver: external
Wakeon: MagicPacket(tm)
Ring parameters for vmnic0:
Pre-set maximums:
RX: 8192
RX Mini: 0
RX Jumbo: 1024
TX: 1024
Current hardware settings:
RX: 512
RX Mini: 0
RX Jumbo: 128
TX: 1024
NIC statistics:
rcvd bad skb: 0
xmit called: 232748296
xmited frames: 0
xmit finished: 232748296
bad skb len: 0
no cmd desc: 0
polled: 0
uphappy: 915811649
updropped: 0
tx dropped: 0
txOutOfBounceBuf dropped: 0
csummed: 915333337
no rcv: 915811649
rx bytes: 1173797709123
tx bytes: 271982117729
NIC: vmnic1
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 100baseT/Full, 1000baseT/Full
Auto Negotiation: true
Cable Type: Twisted Pair
Current Message Level: 5
Driver Info:
NICDriverInfo:
Bus Info: 0000:04:00.1
Driver: nx_nic
Firmware Version: 4.0.591
Version: 5.5.634
Link Detected: true
Link Status: Up
Name: vmnic1
PHY Address: 1
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: TP
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: true
Transceiver: external
Wakeon: MagicPacket(tm)
Ring parameters for vmnic1:
Pre-set maximums:
RX: 8192
RX Mini: 0
RX Jumbo: 1024
TX: 1024
Current hardware settings:
RX: 512
RX Mini: 0
RX Jumbo: 128
TX: 1024
NIC statistics:
rcvd bad skb: 0
xmit called: 5
xmited frames: 0
xmit finished: 5
bad skb len: 0
no cmd desc: 0
polled: 0
uphappy: 501210
updropped: 0
tx dropped: 0
txOutOfBounceBuf dropped: 0
csummed: 187350
no rcv: 501210
rx bytes: 37739983
tx bytes: 700
NIC: vmnic2
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 100baseT/Full, 1000baseT/Full
Auto Negotiation: true
Cable Type: Twisted Pair
Current Message Level: 5
Driver Info:
NICDriverInfo:
Bus Info: 0000:04:00.2
Driver: nx_nic
Firmware Version: 4.0.591
Version: 5.5.634
Link Detected: true
Link Status: Up
Name: vmnic2
PHY Address: 2
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: TP
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: true
Transceiver: external
Wakeon: MagicPacket(tm)
Ring parameters for vmnic2:
Pre-set maximums:
RX: 8192
RX Mini: 0
RX Jumbo: 1024
TX: 1024
Current hardware settings:
RX: 512
RX Mini: 0
RX Jumbo: 128
TX: 1024
NIC statistics:
rcvd bad skb: 0
xmit called: 5
xmited frames: 0
xmit finished: 5
bad skb len: 0
no cmd desc: 0
polled: 0
uphappy: 501209
updropped: 0
tx dropped: 0
txOutOfBounceBuf dropped: 0
csummed: 187350
no rcv: 501209
rx bytes: 37739923
tx bytes: 700
NIC: vmnic3
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 100baseT/Full, 1000baseT/Full
Auto Negotiation: false
Cable Type: Twisted Pair
Current Message Level: 5
Driver Info:
NICDriverInfo:
Bus Info: 0000:04:00.3
Driver: nx_nic
Firmware Version: 4.0.591
Version: 5.5.634
Link Detected: false
Link Status: Down
Name: vmnic3
PHY Address: 3
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: TP
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: true
Transceiver: external
Wakeon: MagicPacket(tm)
Ring parameters for vmnic3:
Pre-set maximums:
RX: 8192
RX Mini: 0
RX Jumbo: 1024
TX: 1024
Current hardware settings:
RX: 512
RX Mini: 0
RX Jumbo: 128
TX: 1024
NIC statistics:
rcvd bad skb: 0
xmit called: 0
xmited frames: 0
xmit finished: 0
bad skb len: 0
no cmd desc: 0
polled: 0
uphappy: 0
updropped: 0
tx dropped: 0
txOutOfBounceBuf dropped: 0
csummed: 0
no rcv: 0
rx bytes: 0
tx bytes: 0
NIC: vmnic4
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 1000baseT/Full, 10000baseT/Full
Auto Negotiation: true
Cable Type: FIBRE
Current Message Level: 7
Driver Info:
NICDriverInfo:
Bus Info: 0000:05:00.0
Driver: ixgbe
Firmware Version: 0x61bd0001
Version: 3.15.1.8iov
Link Detected: true
Link Status: Up
Name: vmnic4
PHY Address: 0
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: FIBRE
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: false
Transceiver: external
Wakeon: None
Ring parameters for vmnic4:
Pre-set maximums:
RX: 4096
RX Mini: 0
RX Jumbo: 0
TX: 4096
Current hardware settings:
RX: 456
RX Mini: 0
RX Jumbo: 0
TX: 1024
NIC statistics:
rx_packets: 21415743
tx_packets: 730734
rx_bytes: 31685513467
tx_bytes: 48753261
rx_errors: 0
tx_errors: 0
rx_dropped: 0
tx_dropped: 0
multicast: 186359
collisions: 0
rx_over_errors: 0
rx_crc_errors: 0
rx_frame_errors: 0
rx_fifo_errors: 0
rx_missed_errors: 438
tx_aborted_errors: 0
tx_carrier_errors: 0
tx_fifo_errors: 0
tx_heartbeat_errors: 0
rx_pkts_nic: 21415743
tx_pkts_nic: 730734
rx_bytes_nic: 31771840627
tx_bytes_nic: 51676197
lsc_int: 4
tx_busy: 0
non_eop_descs: 0
broadcast: 313045
rx_no_buffer_count: 0
tx_timeout_count: 0
tx_restart_queue: 0
rx_long_length_errors: 0
rx_short_length_errors: 0
tx_flow_control_xon: 17
rx_flow_control_xon: 0
tx_flow_control_xoff: 17
rx_flow_control_xoff: 0
rx_csum_offload_errors: 0
rx_header_split: 0
alloc_rx_page_failed: 0
alloc_rx_buff_failed: 0
rx_no_dma_resources: 0
hw_rsc_aggregated: 0
hw_rsc_flushed: 0
fdir_match: 0
fdir_miss: 0
fdir_overflow: 0
fcoe_bad_fccrc: 0
fcoe_last_errors: 0
rx_fcoe_dropped: 0
rx_fcoe_packets: 0
rx_fcoe_dwords: 0
fcoe_noddp: 0
fcoe_noddp_ext_buff: 0
tx_fcoe_packets: 0
tx_fcoe_dwords: 0
os2bmc_rx_by_bmc: 0
os2bmc_tx_by_bmc: 0
os2bmc_tx_by_host: 0
os2bmc_rx_by_host: 0
tx_queue_0_packets: 188647
tx_queue_0_bytes: 12964632
tx_queue_1_packets: 542087
tx_queue_1_bytes: 35788629
tx_queue_2_packets: 0
tx_queue_2_bytes: 0
tx_queue_3_packets: 0
tx_queue_3_bytes: 0
tx_queue_4_packets: 0
tx_queue_4_bytes: 0
tx_queue_5_packets: 0
tx_queue_5_bytes: 0
tx_queue_6_packets: 0
tx_queue_6_bytes: 0
tx_queue_7_packets: 0
tx_queue_7_bytes: 0
tx_queue_8_packets: 0
tx_queue_8_bytes: 0
rx_queue_0_packets: 5411352
rx_queue_0_bytes: 7463616150
rx_queue_1_packets: 16004391
rx_queue_1_bytes: 24221897317
rx_queue_2_packets: 0
rx_queue_2_bytes: 0
rx_queue_3_packets: 0
rx_queue_3_bytes: 0
rx_queue_4_packets: 0
rx_queue_4_bytes: 0
rx_queue_5_packets: 0
rx_queue_5_bytes: 0
rx_queue_6_packets: 0
rx_queue_6_bytes: 0
rx_queue_7_packets: 0
rx_queue_7_bytes: 0
rx_queue_8_packets: 0
rx_queue_8_bytes: 0
tx_pb_0_pxon: 0
tx_pb_0_pxoff: 0
tx_pb_1_pxon: 0
tx_pb_1_pxoff: 0
tx_pb_2_pxon: 0
tx_pb_2_pxoff: 0
tx_pb_3_pxon: 0
tx_pb_3_pxoff: 0
tx_pb_4_pxon: 0
tx_pb_4_pxoff: 0
tx_pb_5_pxon: 0
tx_pb_5_pxoff: 0
tx_pb_6_pxon: 0
tx_pb_6_pxoff: 0
tx_pb_7_pxon: 0
tx_pb_7_pxoff: 0
rx_pb_0_pxon: 0
rx_pb_0_pxoff: 0
rx_pb_1_pxon: 0
rx_pb_1_pxoff: 0
rx_pb_2_pxon: 0
rx_pb_2_pxoff: 0
rx_pb_3_pxon: 0
rx_pb_3_pxoff: 0
rx_pb_4_pxon: 0
rx_pb_4_pxoff: 0
rx_pb_5_pxon: 0
rx_pb_5_pxoff: 0
rx_pb_6_pxon: 0
rx_pb_6_pxoff: 0
rx_pb_7_pxon: 0
rx_pb_7_pxoff: 0
NIC: vmnic5
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 1000baseT/Full, 10000baseT/Full
Auto Negotiation: true
Cable Type: FIBRE
Current Message Level: 7
Driver Info:
NICDriverInfo:
Bus Info: 0000:05:00.1
Driver: ixgbe
Firmware Version: 0x61bd0001
Version: 3.15.1.8iov
Link Detected: true
Link Status: Up
Name: vmnic5
PHY Address: 0
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: FIBRE
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: false
Transceiver: external
Wakeon: None
Ring parameters for vmnic5:
Pre-set maximums:
RX: 4096
RX Mini: 0
RX Jumbo: 0
TX: 4096
Current hardware settings:
RX: 456
RX Mini: 0
RX Jumbo: 0
TX: 1024
NIC statistics:
rx_packets: 2142247391
tx_packets: 2825908648
rx_bytes: 2141230286108
tx_bytes: 2606393325008
rx_errors: 0
tx_errors: 0
rx_dropped: 0
tx_dropped: 0
multicast: 186363
collisions: 0
rx_over_errors: 0
rx_crc_errors: 0
rx_frame_errors: 0
rx_fifo_errors: 0
rx_missed_errors: 83312
tx_aborted_errors: 0
tx_carrier_errors: 0
tx_fifo_errors: 0
tx_heartbeat_errors: 0
rx_pkts_nic: 2142247391
tx_pkts_nic: 2520307752
rx_bytes_nic: 2149924349418
tx_bytes_nic: 2596305062653
lsc_int: 4
tx_busy: 0
non_eop_descs: 0
broadcast: 290788
rx_no_buffer_count: 0
tx_timeout_count: 0
tx_restart_queue: 0
rx_long_length_errors: 0
rx_short_length_errors: 0
tx_flow_control_xon: 3612
rx_flow_control_xon: 0
tx_flow_control_xoff: 3662
rx_flow_control_xoff: 0
rx_csum_offload_errors: 0
rx_header_split: 0
alloc_rx_page_failed: 0
alloc_rx_buff_failed: 0
rx_no_dma_resources: 0
hw_rsc_aggregated: 0
hw_rsc_flushed: 0
fdir_match: 0
fdir_miss: 0
fdir_overflow: 0
fcoe_bad_fccrc: 0
fcoe_last_errors: 0
rx_fcoe_dropped: 0
rx_fcoe_packets: 0
rx_fcoe_dwords: 0
fcoe_noddp: 0
fcoe_noddp_ext_buff: 0
tx_fcoe_packets: 0
tx_fcoe_dwords: 0
os2bmc_rx_by_bmc: 0
os2bmc_tx_by_bmc: 0
os2bmc_tx_by_host: 0
os2bmc_rx_by_host: 0
tx_queue_0_packets: 129052399
tx_queue_0_bytes: 147802282957
tx_queue_1_packets: 1327214398
tx_queue_1_bytes: 1199943803642
tx_queue_2_packets: 1369641516
tx_queue_2_bytes: 1258646874139
tx_queue_3_packets: 0
tx_queue_3_bytes: 0
tx_queue_4_packets: 0
tx_queue_4_bytes: 0
tx_queue_5_packets: 0
tx_queue_5_bytes: 0
tx_queue_6_packets: 0
tx_queue_6_bytes: 0
tx_queue_7_packets: 335
tx_queue_7_bytes: 364270
tx_queue_8_packets: 0
tx_queue_8_bytes: 0
rx_queue_0_packets: 79179370
rx_queue_0_bytes: 72631427779
rx_queue_1_packets: 1087828297
rx_queue_1_bytes: 1129052225549
rx_queue_2_packets: 975239724
rx_queue_2_bytes: 939546632780
rx_queue_3_packets: 0
rx_queue_3_bytes: 0
rx_queue_4_packets: 0
rx_queue_4_bytes: 0
rx_queue_5_packets: 0
rx_queue_5_bytes: 0
rx_queue_6_packets: 0
rx_queue_6_bytes: 0
rx_queue_7_packets: 0
rx_queue_7_bytes: 0
rx_queue_8_packets: 0
rx_queue_8_bytes: 0
tx_pb_0_pxon: 0
tx_pb_0_pxoff: 0
tx_pb_1_pxon: 0
tx_pb_1_pxoff: 0
tx_pb_2_pxon: 0
tx_pb_2_pxoff: 0
tx_pb_3_pxon: 0
tx_pb_3_pxoff: 0
tx_pb_4_pxon: 0
tx_pb_4_pxoff: 0
tx_pb_5_pxon: 0
tx_pb_5_pxoff: 0
tx_pb_6_pxon: 0
tx_pb_6_pxoff: 0
tx_pb_7_pxon: 0
tx_pb_7_pxoff: 0
rx_pb_0_pxon: 0
rx_pb_0_pxoff: 0
rx_pb_1_pxon: 0
rx_pb_1_pxoff: 0
rx_pb_2_pxon: 0
rx_pb_2_pxoff: 0
rx_pb_3_pxon: 0
rx_pb_3_pxoff: 0
rx_pb_4_pxon: 0
rx_pb_4_pxoff: 0
rx_pb_5_pxon: 0
rx_pb_5_pxoff: 0
rx_pb_6_pxon: 0
rx_pb_6_pxoff: 0
rx_pb_7_pxon: 0
rx_pb_7_pxoff: 0
Host2
Code: Alles auswählen
Network Interface Cards Information.
Name PCI Device Driver Link Speed Duplex MAC Address MTU Description
----------------------------------------------------------------------------------------
vmnic0 0000:004:00.0 nx_nic Up 1000 Full 2c:59:e5:36:a2:08 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic1 0000:004:00.1 nx_nic Down 0 Full 2c:59:e5:36:a2:09 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic2 0000:004:00.2 nx_nic Down 0 Full 2c:59:e5:36:a2:0a 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic3 0000:004:00.3 nx_nic Down 0 Full 2c:59:e5:36:a2:0b 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic4 0000:00b:00.0 ixgbe Up 10000 Full 90:e2:ba:4a:c0:50 1500 Intel Corporation 82599 10 Gigabit Dual Port Network Connection
vmnic5 0000:00b:00.1 ixgbe Up 10000 Full 90:e2:ba:4a:c0:51 1500 Intel Corporation 82599 10 Gigabit Dual Port Network Connection
NIC: vmnic0
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 100baseT/Full, 1000baseT/Full
Auto Negotiation: true
Cable Type: Twisted Pair
Current Message Level: 5
Driver Info:
NICDriverInfo:
Bus Info: 0000:04:00.0
Driver: nx_nic
Firmware Version: 4.0.591
Version: 5.5.634
Link Detected: true
Link Status: Up
Name: vmnic0
PHY Address: 0
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: TP
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: true
Transceiver: external
Wakeon: MagicPacket(tm)
Ring parameters for vmnic0:
Pre-set maximums:
RX: 8192
RX Mini: 0
RX Jumbo: 1024
TX: 1024
Current hardware settings:
RX: 512
RX Mini: 0
RX Jumbo: 128
TX: 1024
NIC statistics:
rcvd bad skb: 0
xmit called: 0
xmited frames: 0
xmit finished: 0
bad skb len: 0
no cmd desc: 0
polled: 0
uphappy: 21482
updropped: 0
tx dropped: 0
txOutOfBounceBuf dropped: 0
csummed: 8101
no rcv: 21482
rx bytes: 1553382
tx bytes: 0
NIC: vmnic1
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 100baseT/Full, 1000baseT/Full
Auto Negotiation: false
Cable Type: Twisted Pair
Current Message Level: 5
Driver Info:
NICDriverInfo:
Bus Info: 0000:04:00.1
Driver: nx_nic
Firmware Version: 4.0.591
Version: 5.5.634
Link Detected: false
Link Status: Down
Name: vmnic1
PHY Address: 1
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: TP
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: true
Transceiver: external
Wakeon: MagicPacket(tm)
Ring parameters for vmnic1:
Pre-set maximums:
RX: 8192
RX Mini: 0
RX Jumbo: 1024
TX: 1024
Current hardware settings:
RX: 512
RX Mini: 0
RX Jumbo: 128
TX: 1024
NIC statistics:
rcvd bad skb: 0
xmit called: 0
xmited frames: 0
xmit finished: 0
bad skb len: 0
no cmd desc: 0
polled: 0
uphappy: 0
updropped: 0
tx dropped: 0
txOutOfBounceBuf dropped: 0
csummed: 0
no rcv: 0
rx bytes: 0
tx bytes: 0
NIC: vmnic2
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 100baseT/Full, 1000baseT/Full
Auto Negotiation: false
Cable Type: Twisted Pair
Current Message Level: 5
Driver Info:
NICDriverInfo:
Bus Info: 0000:04:00.2
Driver: nx_nic
Firmware Version: 4.0.591
Version: 5.5.634
Link Detected: false
Link Status: Down
Name: vmnic2
PHY Address: 2
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: TP
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: true
Transceiver: external
Wakeon: MagicPacket(tm)
Ring parameters for vmnic2:
Pre-set maximums:
RX: 8192
RX Mini: 0
RX Jumbo: 1024
TX: 1024
Current hardware settings:
RX: 512
RX Mini: 0
RX Jumbo: 128
TX: 1024
NIC statistics:
rcvd bad skb: 0
xmit called: 0
xmited frames: 0
xmit finished: 0
bad skb len: 0
no cmd desc: 0
polled: 0
uphappy: 0
updropped: 0
tx dropped: 0
txOutOfBounceBuf dropped: 0
csummed: 0
no rcv: 0
rx bytes: 0
tx bytes: 0
NIC: vmnic3
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 100baseT/Full, 1000baseT/Full
Auto Negotiation: false
Cable Type: Twisted Pair
Current Message Level: 5
Driver Info:
NICDriverInfo:
Bus Info: 0000:04:00.3
Driver: nx_nic
Firmware Version: 4.0.591
Version: 5.5.634
Link Detected: false
Link Status: Down
Name: vmnic3
PHY Address: 3
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: TP
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: true
Transceiver: external
Wakeon: MagicPacket(tm)
Ring parameters for vmnic3:
Pre-set maximums:
RX: 8192
RX Mini: 0
RX Jumbo: 1024
TX: 1024
Current hardware settings:
RX: 512
RX Mini: 0
RX Jumbo: 128
TX: 1024
NIC statistics:
rcvd bad skb: 0
xmit called: 0
xmited frames: 0
xmit finished: 0
bad skb len: 0
no cmd desc: 0
polled: 0
uphappy: 0
updropped: 0
tx dropped: 0
txOutOfBounceBuf dropped: 0
csummed: 0
no rcv: 0
rx bytes: 0
tx bytes: 0
NIC: vmnic4
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 1000baseT/Full, 10000baseT/Full
Auto Negotiation: true
Cable Type: FIBRE
Current Message Level: 7
Driver Info:
NICDriverInfo:
Bus Info: 0000:0b:00.0
Driver: ixgbe
Firmware Version: 0x61bd0001
Version: 3.19.1iov
Link Detected: true
Link Status: Up
Name: vmnic4
PHY Address: 0
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: FIBRE
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: false
Transceiver: external
Wakeon: None
Ring parameters for vmnic4:
Pre-set maximums:
RX: 4096
RX Mini: 0
RX Jumbo: 0
TX: 4096
Current hardware settings:
RX: 456
RX Mini: 0
RX Jumbo: 0
TX: 1024
NIC statistics:
rx_packets: 13279998
tx_packets: 438161
rx_bytes: 20073577797
tx_bytes: 28928415
rx_errors: 0
tx_errors: 0
rx_dropped: 0
tx_dropped: 0
multicast: 8043
collisions: 0
rx_over_errors: 0
rx_crc_errors: 0
rx_frame_errors: 0
rx_fifo_errors: 0
rx_missed_errors: 163
tx_aborted_errors: 0
tx_carrier_errors: 0
tx_fifo_errors: 0
tx_heartbeat_errors: 0
rx_pkts_nic: 13279998
tx_pkts_nic: 438161
rx_bytes_nic: 20126945223
tx_bytes_nic: 30681059
lsc_int: 5
tx_busy: 0
non_eop_descs: 0
broadcast: 13455
rx_no_buffer_count: 0
tx_timeout_count: 0
tx_restart_queue: 0
rx_long_length_errors: 0
rx_short_length_errors: 0
tx_flow_control_xon: 15
rx_flow_control_xon: 0
tx_flow_control_xoff: 15
rx_flow_control_xoff: 0
rx_csum_offload_errors: 0
rx_header_split: 0
alloc_rx_page_failed: 0
alloc_rx_buff_failed: 0
rx_no_dma_resources: 0
hw_rsc_aggregated: 0
hw_rsc_flushed: 0
fdir_match: 0
fdir_miss: 0
fdir_overflow: 0
fcoe_bad_fccrc: 0
fcoe_last_errors: 0
rx_fcoe_dropped: 0
rx_fcoe_packets: 0
rx_fcoe_dwords: 0
fcoe_noddp: 0
fcoe_noddp_ext_buff: 0
tx_fcoe_packets: 0
tx_fcoe_dwords: 0
os2bmc_rx_by_bmc: 0
os2bmc_tx_by_bmc: 0
os2bmc_tx_by_host: 0
os2bmc_rx_by_host: 0
tx_queue_0_packets: 4773
tx_queue_0_bytes: 321761
tx_queue_1_packets: 433388
tx_queue_1_bytes: 28606654
tx_queue_2_packets: 0
tx_queue_2_bytes: 0
tx_queue_3_packets: 0
tx_queue_3_bytes: 0
tx_queue_4_packets: 0
tx_queue_4_bytes: 0
tx_queue_5_packets: 0
tx_queue_5_bytes: 0
tx_queue_6_packets: 0
tx_queue_6_bytes: 0
tx_queue_7_packets: 0
tx_queue_7_bytes: 0
tx_queue_8_packets: 0
tx_queue_8_bytes: 0
rx_queue_0_packets: 112058
rx_queue_0_bytes: 137458229
rx_queue_1_packets: 13167940
rx_queue_1_bytes: 19936119568
rx_queue_2_packets: 0
rx_queue_2_bytes: 0
rx_queue_3_packets: 0
rx_queue_3_bytes: 0
rx_queue_4_packets: 0
rx_queue_4_bytes: 0
rx_queue_5_packets: 0
rx_queue_5_bytes: 0
rx_queue_6_packets: 0
rx_queue_6_bytes: 0
rx_queue_7_packets: 0
rx_queue_7_bytes: 0
rx_queue_8_packets: 0
rx_queue_8_bytes: 0
tx_pb_0_pxon: 0
tx_pb_0_pxoff: 0
tx_pb_1_pxon: 0
tx_pb_1_pxoff: 0
tx_pb_2_pxon: 0
tx_pb_2_pxoff: 0
tx_pb_3_pxon: 0
tx_pb_3_pxoff: 0
tx_pb_4_pxon: 0
tx_pb_4_pxoff: 0
tx_pb_5_pxon: 0
tx_pb_5_pxoff: 0
tx_pb_6_pxon: 0
tx_pb_6_pxoff: 0
tx_pb_7_pxon: 0
tx_pb_7_pxoff: 0
rx_pb_0_pxon: 0
rx_pb_0_pxoff: 0
rx_pb_1_pxon: 0
rx_pb_1_pxoff: 0
rx_pb_2_pxon: 0
rx_pb_2_pxoff: 0
rx_pb_3_pxon: 0
rx_pb_3_pxoff: 0
rx_pb_4_pxon: 0
rx_pb_4_pxoff: 0
rx_pb_5_pxon: 0
rx_pb_5_pxoff: 0
rx_pb_6_pxon: 0
rx_pb_6_pxoff: 0
rx_pb_7_pxon: 0
rx_pb_7_pxoff: 0
NIC: vmnic5
NICInfo:
Advertised Auto Negotiation: true
Advertised Link Modes: 1000baseT/Full, 10000baseT/Full
Auto Negotiation: true
Cable Type: FIBRE
Current Message Level: 7
Driver Info:
NICDriverInfo:
Bus Info: 0000:0b:00.1
Driver: ixgbe
Firmware Version: 0x61bd0001
Version: 3.19.1iov
Link Detected: true
Link Status: Up
Name: vmnic5
PHY Address: 0
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: FIBRE
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: false
Transceiver: external
Wakeon: None
Ring parameters for vmnic5:
Pre-set maximums:
RX: 4096
RX Mini: 0
RX Jumbo: 0
TX: 4096
Current hardware settings:
RX: 456
RX Mini: 0
RX Jumbo: 0
TX: 1024
NIC statistics:
rx_packets: 110871
tx_packets: 85336
rx_bytes: 83825341
tx_bytes: 71073616
rx_errors: 0
tx_errors: 0
rx_dropped: 0
tx_dropped: 0
multicast: 8049
collisions: 0
rx_over_errors: 0
rx_crc_errors: 0
rx_frame_errors: 0
rx_fifo_errors: 0
rx_missed_errors: 0
tx_aborted_errors: 0
tx_carrier_errors: 0
tx_fifo_errors: 0
tx_heartbeat_errors: 0
rx_pkts_nic: 110871
tx_pkts_nic: 84099
rx_bytes_nic: 84268825
tx_bytes_nic: 71328418
lsc_int: 6
tx_busy: 0
non_eop_descs: 0
broadcast: 13421
rx_no_buffer_count: 0
tx_timeout_count: 0
tx_restart_queue: 0
rx_long_length_errors: 0
rx_short_length_errors: 0
tx_flow_control_xon: 0
rx_flow_control_xon: 0
tx_flow_control_xoff: 0
rx_flow_control_xoff: 0
rx_csum_offload_errors: 0
rx_header_split: 0
alloc_rx_page_failed: 0
alloc_rx_buff_failed: 0
rx_no_dma_resources: 0
hw_rsc_aggregated: 0
hw_rsc_flushed: 0
fdir_match: 0
fdir_miss: 0
fdir_overflow: 0
fcoe_bad_fccrc: 0
fcoe_last_errors: 0
rx_fcoe_dropped: 0
rx_fcoe_packets: 0
rx_fcoe_dwords: 0
fcoe_noddp: 0
fcoe_noddp_ext_buff: 0
tx_fcoe_packets: 0
tx_fcoe_dwords: 0
os2bmc_rx_by_bmc: 0
os2bmc_tx_by_bmc: 0
os2bmc_tx_by_host: 0
os2bmc_rx_by_host: 0
tx_queue_0_packets: 85336
tx_queue_0_bytes: 71073616
tx_queue_1_packets: 0
tx_queue_1_bytes: 0
tx_queue_2_packets: 0
tx_queue_2_bytes: 0
tx_queue_3_packets: 0
tx_queue_3_bytes: 0
tx_queue_4_packets: 0
tx_queue_4_bytes: 0
tx_queue_5_packets: 0
tx_queue_5_bytes: 0
tx_queue_6_packets: 0
tx_queue_6_bytes: 0
tx_queue_7_packets: 0
tx_queue_7_bytes: 0
tx_queue_8_packets: 0
tx_queue_8_bytes: 0
rx_queue_0_packets: 110871
rx_queue_0_bytes: 83825341
rx_queue_1_packets: 0
rx_queue_1_bytes: 0
rx_queue_2_packets: 0
rx_queue_2_bytes: 0
rx_queue_3_packets: 0
rx_queue_3_bytes: 0
rx_queue_4_packets: 0
rx_queue_4_bytes: 0
rx_queue_5_packets: 0
rx_queue_5_bytes: 0
rx_queue_6_packets: 0
rx_queue_6_bytes: 0
rx_queue_7_packets: 0
rx_queue_7_bytes: 0
rx_queue_8_packets: 0
rx_queue_8_bytes: 0
tx_pb_0_pxon: 0
tx_pb_0_pxoff: 0
tx_pb_1_pxon: 0
tx_pb_1_pxoff: 0
tx_pb_2_pxon: 0
tx_pb_2_pxoff: 0
tx_pb_3_pxon: 0
tx_pb_3_pxoff: 0
tx_pb_4_pxon: 0
tx_pb_4_pxoff: 0
tx_pb_5_pxon: 0
tx_pb_5_pxoff: 0
tx_pb_6_pxon: 0
tx_pb_6_pxoff: 0
tx_pb_7_pxon: 0
tx_pb_7_pxoff: 0
rx_pb_0_pxon: 0
rx_pb_0_pxoff: 0
rx_pb_1_pxon: 0
rx_pb_1_pxoff: 0
rx_pb_2_pxon: 0
rx_pb_2_pxoff: 0
rx_pb_3_pxon: 0
rx_pb_3_pxoff: 0
rx_pb_4_pxon: 0
rx_pb_4_pxoff: 0
rx_pb_5_pxon: 0
rx_pb_5_pxoff: 0
rx_pb_6_pxon: 0
rx_pb_6_pxoff: 0
rx_pb_7_pxon: 0
rx_pb_7_pxoff: 0
[/list]
-
kastlr
- Profi
- Beiträge: 993
- Registriert: 31.03.2008, 17:26
- Wohnort: Einzugsbereich des FC Schalke 04
- Kontaktdaten:
Hallo,
laut nicinfo.sh Script stecken die beiden 10 GBit Karten in unterschiedlichen PCI Slots, vielleicht liegt es ja daran.
Host 1 (PCI Slot 5)
Host 2 (PCI Slot 11)
Eventuell wurde das Platinen Layout des Motherboards ja geändert.
Weiterhin gehe ich mal davon aus, das ihr bei euren intensiven Tests auch mal die LAN Switch Ports, an denen Host 1 hängt mal mit Host 2 verbunden habt.
Denn einige Switch Hersteller haben die Angewohnheit, nur einige Ihrer Ports für die volle Geschwindigkeit auszulegen.
An diese hängt man dann üblicherweise seine Storage Arrays, die Hosts hängen dann an den Ports mit limitiertem Trough Put.
Nicht falsch verstehen, alle Ports unterstützen 10 GBit, allerdings kann die Anzahl der Ports, die ein im Switch vorhandener ASIC zu bedienen hat abhängig davon sein, wo das Kabel aufgesteckt wird.
Als Beispiel, Ports 0-3 teilen sich einen ASIC, 4-12/16/24 etc einen weitern ASIC.
In PortGruppe 1 steht somit deutlich mehr Compute Power bereit als in PortGruppe 2.
Viel Erfolg,
Ralf
laut nicinfo.sh Script stecken die beiden 10 GBit Karten in unterschiedlichen PCI Slots, vielleicht liegt es ja daran.
Host 1 (PCI Slot 5)
Code: Alles auswählen
Name PCI Device Driver Link Speed Duplex MAC Address MTU Description
----------------------------------------------------------------------------------------
vmnic0 0000:004:00.0 nx_nic Up 1000 Full 74:46:a0:f3:9e:54 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic1 0000:004:00.1 nx_nic Up 1000 Full 74:46:a0:f3:9e:55 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic2 0000:004:00.2 nx_nic Up 1000 Full 74:46:a0:f3:9e:56 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic3 0000:004:00.3 nx_nic Down 0 Full 74:46:a0:f3:9e:57 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic4 0000:005:00.0 ixgbe Up 10000 Full 90:e2:ba:4a:bf:fc 1500 Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
vmnic5 0000:005:00.1 ixgbe Up 10000 Full 90:e2:ba:4a:bf:fd 1500 Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
Host 2 (PCI Slot 11)
Code: Alles auswählen
Name PCI Device Driver Link Speed Duplex MAC Address MTU Description
----------------------------------------------------------------------------------------
vmnic0 0000:004:00.0 nx_nic Up 1000 Full 2c:59:e5:36:a2:08 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic1 0000:004:00.1 nx_nic Down 0 Full 2c:59:e5:36:a2:09 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic2 0000:004:00.2 nx_nic Down 0 Full 2c:59:e5:36:a2:0a 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic3 0000:004:00.3 nx_nic Down 0 Full 2c:59:e5:36:a2:0b 1500 NetXen HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
vmnic4 0000:00b:00.0 ixgbe Up 10000 Full 90:e2:ba:4a:c0:50 1500 Intel Corporation 82599 10 Gigabit Dual Port Network Connection
vmnic5 0000:00b:00.1 ixgbe Up 10000 Full 90:e2:ba:4a:c0:51 1500 Intel Corporation 82599 10 Gigabit Dual Port Network Connection
Eventuell wurde das Platinen Layout des Motherboards ja geändert.
Weiterhin gehe ich mal davon aus, das ihr bei euren intensiven Tests auch mal die LAN Switch Ports, an denen Host 1 hängt mal mit Host 2 verbunden habt.
Denn einige Switch Hersteller haben die Angewohnheit, nur einige Ihrer Ports für die volle Geschwindigkeit auszulegen.
An diese hängt man dann üblicherweise seine Storage Arrays, die Hosts hängen dann an den Ports mit limitiertem Trough Put.
Nicht falsch verstehen, alle Ports unterstützen 10 GBit, allerdings kann die Anzahl der Ports, die ein im Switch vorhandener ASIC zu bedienen hat abhängig davon sein, wo das Kabel aufgesteckt wird.
Als Beispiel, Ports 0-3 teilen sich einen ASIC, 4-12/16/24 etc einen weitern ASIC.
In PortGruppe 1 steht somit deutlich mehr Compute Power bereit als in PortGruppe 2.
Viel Erfolg,
Ralf
Mit den Slots hast du recht da habe ich heute morgen nochmals gecheckt.
Wobei das ganze noch unlogischer wird
Host1 ist im Slot7 daraufhin meldet die Karte im dmesg pcie x4.
Am Host1 allerdings habe ich über 4Gbit durchsatz.
Host1 ist im Slot11 und im dmesg pcie x8 auf einem x16 Slot
Am Host2 allerdings nach der Aktion native mit der Livecd-grml-full-64 getestet nur 3Gbit
Mit VMware 5.5 gestartet wieder nur 1,5Gbit
Werde aber deine Vorschläge mit den Switch nochmals testen. Ist nicht so ganz einfach der Host1 ist Produktiv und Host2 soll eigentlich der HA-Cluster Gegensatz werden. Hab also nicht mehr viel Spielraum deswegen muss ich erstmal einen Downtime beantragen.
Wobei das ganze noch unlogischer wird
Host1 ist im Slot7 daraufhin meldet die Karte im dmesg pcie x4.
Am Host1 allerdings habe ich über 4Gbit durchsatz.
Host1 ist im Slot11 und im dmesg pcie x8 auf einem x16 Slot
Am Host2 allerdings nach der Aktion native mit der Livecd-grml-full-64 getestet nur 3Gbit
Mit VMware 5.5 gestartet wieder nur 1,5Gbit
Werde aber deine Vorschläge mit den Switch nochmals testen. Ist nicht so ganz einfach der Host1 ist Produktiv und Host2 soll eigentlich der HA-Cluster Gegensatz werden. Hab also nicht mehr viel Spielraum deswegen muss ich erstmal einen Downtime beantragen.
-
Dayworker
- King of the Hill
- Beiträge: 13657
- Registriert: 01.10.2008, 12:54
- Wohnort: laut USV-Log am Ende der Welt...
Ausgehend von http://h20195.www2.hp.com/v2/GetPDF.aspx%2F4AA0-6315ENW.pdf spielt es schon eine Rolle, welche Karte du in welchen Slot steckst. Deine Angabe "1x HP StorageWorks Dual Channel 8 Gb/s 82Q PCI-E-to- Fibre Channel Host Bus Adapter" sehe ich auch nur in Host1.Expansion slot
Base
2 PCI-E 2.0 x8, 3 PCI-E 2.0 x4
Optional mezzanines
2 PCI-E 2.0 x16, 1 PCI-E 2.0 x4, 2 PCI-X
4 PCI-E 2.0 x8, 1 PCI-E 2.0 x4, 1 PCI-E 1.1 x4
Up to 11 slots supported; all full length/full height
Zurück zu „vSphere 5.5 / ESXi 5.5“
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 8 Gäste