VMware-Forum

Hallo zusammen,

das Remote Console Plugin an sich ist ja ganz praktisch, allerdings ziemlich nervig wenn man mal an den Rand kommt.
Dann stockt die Maus und der Rechner reagiert eine kurze Zeit lang nicht.
Wenn man nun dauerhaft an den virtuellen Maschinen über dieses Plugin arbeitet, ist kommts öfter vor und raubt viel Zeit.
Liegt dass nur an der Performanz des Rechners von dem man sich verbindet oder
kann man irgendwas an der virtuellen Maschine verstellen, dass es wenig bis gar keine Verzögerung mehr hat nachdem man an den Rand gekommen ist.

Liebe Grüße
ExecuteD

Weiß niemand ob das an der Performanz des Rechners oder an irgendwelchen Einstellungen am Plugin liegt?

Poste mal ein paar Details vom Host. Bei mir gibt es bisher damit keine größeren Probleme, wenn man mal von einem manchmal sehr störischen Plug-in absieht. Ein Restart des Web-Accesses sollte eigentlich ausreichen. Wenn das nicht hilft, versuch zuerst einen Restart aller VMware-Dienste und danach einen kompletten Host-Reboot.

Details zum Host

Windows XP
Lenovo Core 2 Dou @ 2 GHZ
3 GB DDR 2 RAM
8 VMs
100 MBIT Netzwerk

Die virtuellen Maschinen werden nie alle gleichzeitig verwendet.
Sondern mal 2-3 gleichzeitig.

Ich setz die Kiste gleich mal neu auf.
Und bastel n bissel am RAM

Win 2k3 Server x64
6 GB DDR 2 RAM

Windows XP
Lenovo Core 2 Dou @ 2 GHZ
3 GB DDR 2 RAM
8 VMs
100 MBIT Netzwerk

Je nach Arbeitsspeicherbedarf deiner Gäste sind 3GB Host-RAM vielleicht schon etwas knapp bemessen und das Remote-Plugin braucht auch etwas Zeit zur Darstellung der VM-Inhalte.
Nutzt du eigentlich eine ungewöhnliche oder hohe Auflösung in der VM? Setzt dein Lenovo auf Chipsatzgrafik?

Die Auflösung der VMs ist 1024x1240 Pixel
Ich schraubs erstmal runter auf 800x600 mal schauen.
Chipsatzgrafik? Sorry da bin ich nunmal überfragt.

Danke schonmal für deine antworten

ExecuteD hat geschrieben:Die Auflösung der VMs ist 1024x1240 Pixel
Ich schraubs erstmal runter auf 800x600 mal schauen.
Chipsatzgrafik? Sorry da bin ich nunmal überfragt.

Danke schonmal für deine antworten

1024x1240Pixel *KopfKratz* ...kenn ich nicht die Auflösung oder sollte das 1280x1024 heißen
800x600 wird dir vermutlich aus demselben Grund auch kein schärferes Bild liefern.
Poste bitte mal welches Modell du von Lenovo genau hast, dazu dann auch gleich die genaue Bildschirmauflösung und erkundige dich auch gleich mal nach der Grafik. Vielleicht erhellt das ja die Sache.

natürlich meinte ich 1024 * 768

Die Kiste ist ein Lenovo M57 6066-A3G.
Die Grafikkarte des Lenovos ist ne Intel Q35 Express Chipset Family... Klartext ausm Geräte Manager.
Mittlerweile hat der Lenovo 6 GB RAM.

Ich weiß ehrlich nicht was die Grafikkarte des Servers damit zutun hat.
Wenn ich die VMs auf dem Server mit dem Remote Console Plugin betreibe, habe ich diese Probleme nicht.
Nur wenn ich mich von einem anderen PC aus dem Netzwerk mit der virtuellen Maschine über das Remote Console Plugin verbinde, dauerts etwas wenn ich einmal an den Fensterrand des Remote Console Plugins gekommen bin.

So wie ich das sehe liegt es nicht an den Clients.
Kann das an der Netzwerkkarte liegen? Ist ne 10/100 er drin und das Netzwerk unterstützt bei mir auch nicht mehr.
Falls es daran liegt könnte ich eine 2. Netzwerkkarte verbauen und die beiden dann in den Tunnelingmodus fahren.

Der Server hat nur indirekt mit der Graka zu tun. Verwendest du den Fullscreen-Modus bei der Verbindung von einem anderen Rechner zum Host?
Wenn dem so sein sollte, hast du dasselbe Problem wie ich auf meinem LCD. Wenn ich eine VM mit 1024x768 auf Vollbild umschalte, stellt mein LCD mit seiner nativen Auflösung von 1680x1050 nur noch nette Blockgrafik dar. Damit ist die Grafikqualität vergleichbar einer PC-Auflösung von 800x600 dargestellt über S-Video auf einem älteren CRT-Fernseher.

Die beste Anzeigequalität auf einem entfernten PC bekommst du also immer nur dann hin, wenn du die Auflösung der VM an die des anzeigenden Monitors anpaßt oder einfach den Full-Screen aus läßt.

Ahh danke. Aber mit der Qualität hatte ich zuvor ja keine Probleme
Hab mittlerweile auf 800x600 umgeschlagen.
Scheinbar ist mein Problem unabhängig von der Auflösung.

Ich vermute immernoch die Hardware des Clients oder das Netzwerk.
Da das Problem auf dem Server nicht zu bemerken ist.

EDIT:

Das Netzkwerk wie die Hardware kann ich mittlerweile nun beide ausschließen, da bei der Übertragung nur geringe Datenmengen über die Leitung gehen und es egal von welchem Rechner ich das Remote Console Plugin benutze...
...es kommt fast immer zu der Verzögerung wenn man aus der virtuellen Maschine rauskommt.

Eine andere Möglichkeit wäre...
...das die VM sozusagen in den Standby Modus geht.
Den je länger ich nichts an der VM gemacht habe, desto eher dauerts länger.

Was bringt es eigentlich wirklich wenn die virtuellen Festplatten im Performance Modus laufen?

So es hat sich wieder etwas neues ergeben.
Von einem Rechner auf dem ebenfalls VM-Ware Server installiert ist, tritt das genannte Problem nicht auf.
Man kann die Maus aus dem Fenster bewegen und wieder in das VM-ware Remote Plugin Fenster hinein ohne dass man sekundenlang keine Reaktion von der VM bekommt.

Ich teste nun ob wirklich ein weiteres VM-Ware Produkt installiert sein muss damit das fließend funktioniert

Das kannst du dir schenken. VMware läßt sich nicht parallel installieren, also entweder VMserver oder WS oder Player.

Das Remote Console Plugin läuft ja auch wenn der VMWare Server installiert ist.

ExecuteD hat geschrieben:Das Remote Console Plugin läuft ja auch wenn der VMWare Server installiert ist.

Das gehört zwar zum Produkt VMserver2 und zählt aber nicht als eigenständige VM-Anwendung wie die 3 zuvor schon genannten.

Poste/verlinke doch einfach mal das vmware.log und dann findet sich vielleicht etwas.

So im Anhang die Log Datei einer VM
[quote]Jun 04 11:57:29.640: vmx| Log for VMware Server pid=2408 version=2.0.1 build=build-156745 option=Release
Jun 04 11:57:29.671: vmx| Hostname=fernwartung0812.domäne.de
Jun 04 11:57:29.671: vmx| IP=193.96.186.133
Jun 04 11:57:29.671: vmx| IP=192.168.58.1
Jun 04 11:57:29.671: vmx| IP=192.168.159.1
Jun 04 11:57:29.703: vmx| Command line: "C:\Programme (x86)\VMware\VMware Server\x64\vmware-vmx.exe" "-#" "name=VMware Server;version=2.0.1;buildnumber=156745;licensename=VMware GSX Server for Win32;licenseversion=3.0 build-156745;" "-@" "pipe=\\.\pipe\vmxe9cd1dea82caac81;" "C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmx"
Jun 04 11:57:29.859: vmx| UI Connecting to pipe '\\.\pipe\vmxe9cd1dea82caac81' with user '(null)'
Jun 04 11:57:29.937: vmx| Transitioned vmx/execState/val to poweredOff
Jun 04 11:57:29.968: vmx| MStat: Creating Stat system.cpuusage
Jun 04 11:57:29.968: vmx| MStat: Creating Stat system.ram
Jun 04 11:57:29.968: vmx| MStat: Creating Stat system.uptime
Jun 04 11:57:29.968: vmx| MStat: Creating Stat system.load
Jun 04 11:57:29.984: vmx| HD: host version is 5.2.3790
Jun 04 11:57:29.984: vmx| HD: addr fffff80001039710
Jun 04 11:57:29.984: vmx| HD: fffff800011db848, fffff800011b2800
Jun 04 11:57:29.984: vmx| VMMon_GetkHzEstimate: Calculated 1995000 kHz
Jun 04 11:57:29.984: vmx| VMMon_RememberkHzEstimate: Calculated 1995000 kHz
Jun 04 11:57:29.984: vmx| CPU # 0 TSC = 14342663524220
Jun 04 11:57:29.984: vmx| CPU # 1 TSC = 14342663524170
Jun 04 11:57:29.984: vmx| TSC delta 50
Jun 04 11:57:29.984: vmx| PTSC: RefClockToTSC 1995000000Hz -> 1995000000Hz
Jun 04 11:57:29.984: vmx| PTSC: RefClockToTSC ((x * 2147483648) >> 31)
Jun 04 11:57:29.984: vmx| PTSC: using TSC
Jun 04 11:57:29.984: vmx| CPUID[0] vendor: GenuntelineI
Jun 04 11:57:29.984: vmx| CPUID[0] name: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000000, 0: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000001, 0: 0x000006fd 0x00020800 0x0000e39d 0xbfebfbff
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000002, 0: 0x05b0b101 0x005657f0 0x00000000 0x2cb4307d
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000004, 0: 0x04000121 0x01c0003f 0x0000003f 0x00000001
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000005, 0: 0x00000040 0x00000040 0x00000003 0x00000220
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000006, 0: 0x00000001 0x00000002 0x00000001 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000008, 0: 0x00000400 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 0000000a, 0: 0x07280202 0x00000000 0x00000000 0x00000503
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20100800
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000003, 0: 0x44203229 0x43206f75 0x20205550 0x45202020
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000004, 0: 0x30303434 0x20402020 0x30302e32 0x007a4847
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000006, 0: 0x00000000 0x00000000 0x08006040 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[0] level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] vendor: GenuntelineI
Jun 04 11:57:29.984: vmx| CPUID[1] name: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000000, 0: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000001, 0: 0x000006fd 0x01020800 0x0000e39d 0xbfebfbff
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000002, 0: 0x05b0b101 0x005657f0 0x00000000 0x2cb4307d
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000004, 0: 0x04000121 0x01c0003f 0x0000003f 0x00000001
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000005, 0: 0x00000040 0x00000040 0x00000003 0x00000220
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000006, 0: 0x00000001 0x00000002 0x00000001 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000008, 0: 0x00000400 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 0000000a, 0: 0x07280202 0x00000000 0x00000000 0x00000503
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20100800
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000003, 0: 0x44203229 0x43206f75 0x20205550 0x45202020
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000004, 0: 0x30303434 0x20402020 0x30302e32 0x007a4847
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000006, 0: 0x00000000 0x00000000 0x08006040 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID[1] level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID vendor: GenuntelineI
Jun 04 11:57:29.984: vmx| hostCPUID name: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz
Jun 04 11:57:29.984: vmx| hostCPUID level 00000000, 0: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
Jun 04 11:57:29.984: vmx| hostCPUID level 00000001, 0: 0x000006fd 0x00020800 0x0000e39d 0xbfebfbff
Jun 04 11:57:29.984: vmx| hostCPUID level 00000002, 0: 0x05b0b101 0x005657f0 0x00000000 0x2cb4307d
Jun 04 11:57:29.984: vmx| hostCPUID level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 00000004, 0: 0x04000121 0x01c0003f 0x0000003f 0x00000001
Jun 04 11:57:29.984: vmx| hostCPUID level 00000005, 0: 0x00000040 0x00000040 0x00000003 0x00000220
Jun 04 11:57:29.984: vmx| hostCPUID level 00000006, 0: 0x00000001 0x00000002 0x00000001 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 00000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 00000008, 0: 0x00000400 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 0000000a, 0: 0x07280202 0x00000000 0x00000000 0x00000503
Jun 04 11:57:29.984: vmx| hostCPUID level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20100800
Jun 04 11:57:29.984: vmx| hostCPUID level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
Jun 04 11:57:29.984: vmx| hostCPUID level 80000003, 0: 0x44203229 0x43206f75 0x20205550 0x45202020
Jun 04 11:57:29.984: vmx| hostCPUID level 80000004, 0: 0x30303434 0x20402020 0x30302e32 0x007a4847
Jun 04 11:57:29.984: vmx| hostCPUID level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 80000006, 0: 0x00000000 0x00000000 0x08006040 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| hostCPUID level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Jun 04 11:57:29.984: vmx| CPUID Maximum Physical Address Bits supported across all CPUs: 36
Jun 04 11:57:30.046: vmx| Host ACPI: can't find SRAT
Jun 04 11:57:30.046: vmx| Host: SRAT tables not found in memory
Jun 04 11:57:30.046: vmx| ACL_InitCapabilities: current IPC thread
Jun 04 11:57:30.046: vmx| ACL_InitCapabilities: done
Jun 04 11:57:30.046: vmx| changing directory to C:\Virtual Machines\VM_Fernwartung1\.
Jun 04 11:57:30.046: vmx| Config file: C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmx
Jun 04 11:57:30.156: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Jun 04 11:57:30.312: vmx| VMXVmdbCbVmVmxExecState: Exec state change requested to state poweredOn without reset, soft.
Jun 04 11:57:30.328: vmx| TOOLS delaying state change request to state 3
Jun 04 11:57:30.328: vmx| PowerOn
Jun 04 11:57:30.328: vmx| VMX_PowerOn: VMX build 156745, UI build 156745
Jun 04 11:57:30.328: vmx| Host: WIN32 highest NUMA node 0
Jun 04 11:57:30.328: vmx| Host: WIN32 NUMA node 0, CPU mask 0x0000000000000003
Jun 04 11:57:30.328: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Jun 04 11:57:30.328: vmx| HOST Windows version 5.2, build 3790, platform 2, "Service Pack 2", SMP
Jun 04 11:57:30.328: vmx| DICT --- USER PREFERENCES
Jun 04 11:57:30.328: vmx| DICT --- USER DEFAULTS
Jun 04 11:57:30.328: vmx| DICT --- HOST DEFAULTS
Jun 04 11:57:30.328: vmx| DICT authd.client.port = 902
Jun 04 11:57:30.328: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Jun 04 11:57:30.328: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Jun 04 11:57:30.328: vmx| DICT prefvmx.minVmMemPct = 25
Jun 04 11:57:30.328: vmx| DICT prefvmx.allVMMemoryLimit = 5274
Jun 04 11:57:30.328: vmx| DICT prefvmx.useRecommendedLockedMemSize = TRUE
Jun 04 11:57:30.328: vmx| DICT mainMem.partialLazySave = TRUE
Jun 04 11:57:30.328: vmx| DICT mainMem.partialLazyRestore = TRUE
Jun 04 11:57:30.328: vmx| DICT --- SITE DEFAULTS
Jun 04 11:57:30.328: vmx| DICT authd.client.port = 902
Jun 04 11:57:30.328: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Jun 04 11:57:30.328: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Jun 04 11:57:30.328: vmx| DICT prefvmx.minVmMemPct = 25
Jun 04 11:57:30.328: vmx| DICT prefvmx.allVMMemoryLimit = 5274
Jun 04 11:57:30.328: vmx| DICT prefvmx.useRecommendedLockedMemSize = TRUE
Jun 04 11:57:30.328: vmx| DICT mainMem.partialLazySave = TRUE
Jun 04 11:57:30.328: vmx| DICT mainMem.partialLazyRestore = TRUE
Jun 04 11:57:30.328: vmx| DICT --- COMMAND LINE
Jun 04 11:57:30.328: vmx| DICT --- CONFIGURATION
Jun 04 11:57:30.328: vmx| DICT config.version = 8
Jun 04 11:57:30.328: vmx| DICT virtualHW.version = 7
Jun 04 11:57:30.328: vmx| DICT floppy0.present = FALSE
Jun 04 11:57:30.328: vmx| DICT mks.enable3d = TRUE
Jun 04 11:57:30.328: vmx| DICT pciBridge0.present = TRUE
Jun 04 11:57:30.328: vmx| DICT pciBridge4.present = TRUE
Jun 04 11:57:30.328: vmx| DICT pciBridge4.virtualDev = pcieRootPort
Jun 04 11:57:30.328: vmx| DICT pciBridge4.functions = 8
Jun 04 11:57:30.328: vmx| DICT pciBridge5.present = TRUE
Jun 04 11:57:30.328: vmx| DICT pciBridge5.virtualDev = pcieRootPort
Jun 04 11:57:30.328: vmx| DICT pciBridge5.functions = 8
Jun 04 11:57:30.328: vmx| DICT pciBridge6.present = TRUE
Jun 04 11:57:30.328: vmx| DICT pciBridge6.virtualDev = pcieRootPort
Jun 04 11:57:30.328: vmx| DICT pciBridge6.functions = 8
Jun 04 11:57:30.328: vmx| DICT pciBridge7.present = TRUE
Jun 04 11:57:30.328: vmx| DICT pciBridge7.virtualDev = pcieRootPort
Jun 04 11:57:30.328: vmx| DICT pciBridge7.functions = 8
Jun 04 11:57:30.328: vmx| DICT vmci0.present = TRUE
Jun 04 11:57:30.328: vmx| DICT nvram = VM_Fernwartung.nvram
Jun 04 11:57:30.328: vmx| DICT virtualHW.productCompatibility = hosted
Jun 04 11:57:30.328: vmx| DICT ft.secondary0.enabled = TRUE
Jun 04 11:57:30.328: vmx| DICT tools.upgrade.policy = useGlobal
Jun 04 11:57:30.328: vmx| DICT powerType.powerOff = soft
Jun 04 11:57:30.328: vmx| DICT powerType.powerOn = hard
Jun 04 11:57:30.328: vmx| DICT powerType.suspend = hard
Jun 04 11:57:30.328: vmx| DICT powerType.reset = soft
Jun 04 11:57:30.328: vmx| DICT displayName = VM_Fernwartung1
Jun 04 11:57:30.328: vmx| DICT extendedConfigFile = VM_Fernwartung.vmxf
Jun 04 11:57:30.328: vmx| DICT memsize = 256
Jun 04 11:57:30.328: vmx| DICT ide0:0.present = TRUE
Jun 04 11:57:30.328: vmx| DICT ide0:0.fileName = VM_Fernwartung.vmdk
Jun 04 11:57:30.328: vmx| DICT ide1:0.present = TRUE
Jun 04 11:57:30.328: vmx| DICT ide1:0.fileName = D:
Jun 04 11:57:30.328: vmx| DICT ide1:0.deviceType = atapi-cdrom
Jun 04 11:57:30.328: vmx| DICT ide1:0.allowGuestConnectionControl = FALSE
Jun 04 11:57:30.328: vmx| DICT ethernet0.present = TRUE
Jun 04 11:57:30.328: vmx| DICT ethernet0.allowGuestConnectionControl = FALSE
Jun 04 11:57:30.328: vmx| DICT ethernet0.features = 1
Jun 04 11:57:30.328: vmx| DICT ethernet0.wakeOnPcktRcv = FALSE
Jun 04 11:57:30.328: vmx| DICT ethernet0.networkName = Bridged
Jun 04 11:57:30.328: vmx| DICT ethernet0.addressType = generated
Jun 04 11:57:30.328: vmx| DICT usb.present = TRUE
Jun 04 11:57:30.328: vmx| DICT guestOS = winxppro
Jun 04 11:57:30.328: vmx| DICT uuid.location = 56 4d 27 ff 50 09 01 d4-27 b4 8b 15 7f 71 62 29
Jun 04 11:57:30.328: vmx| DICT uuid.bios = 56 4d 27 ff 50 09 01 d4-27 b4 8b 15 7f 71 62 29
Jun 04 11:57:30.328: vmx| DICT vc.uuid = 52 ba ae 35 01 4f 9a c7-61 66 73 22 c5 1c ce 47
Jun 04 11:57:30.328: vmx| DICT ide1:0.startConnected = TRUE
Jun 04 11:57:30.328: vmx| DICT ide1:0.clientDevice = FALSE
Jun 04 11:57:30.328: vmx| DICT ethernet0.generatedAddress = 00:0c:29:71:62:29
Jun 04 11:57:30.328: vmx| DICT tools.syncTime = FALSE
Jun 04 11:57:30.328: vmx| DICT ide0:0.redo =
Jun 04 11:57:30.328: vmx| DICT usb.autoConnect.device0 =
Jun 04 11:57:30.328: vmx| DICT vmotion.checkpointFBSize = 134217728
Jun 04 11:57:30.328: vmx| DICT pciBridge0.pciSlotNumber = 17
Jun 04 11:57:30.328: vmx| DICT pciBridge4.pciSlotNumber = 21
Jun 04 11:57:30.328: vmx| DICT pciBridge5.pciSlotNumber = 22
Jun 04 11:57:30.328: vmx| DICT pciBridge6.pciSlotNumber = 23
Jun 04 11:57:30.328: vmx| DICT pciBridge7.pciSlotNumber = 24
Jun 04 11:57:30.328: vmx| DICT usb.pciSlotNumber = 32
Jun 04 11:57:30.328: vmx| DICT ethernet0.pciSlotNumber = 33
Jun 04 11:57:30.328: vmx| DICT vmci0.pciSlotNumber = 34
Jun 04 11:57:30.328: vmx| DICT usb:0.present = TRUE
Jun 04 11:57:30.328: vmx| DICT usb:1.present = TRUE
Jun 04 11:57:30.328: vmx| DICT ethernet0.generatedAddressOffset = 0
Jun 04 11:57:30.328: vmx| DICT vmci0.id = -602916536
Jun 04 11:57:30.328: vmx| DICT tools.remindInstall = FALSE
Jun 04 11:57:30.328: vmx| DICT usb:1.deviceType = hub
Jun 04 11:57:30.328: vmx| DICT usb:0.deviceType = mouse
Jun 04 11:57:30.328: vmx| DICT usb.autoConnect.device1 =
Jun 04 11:57:30.328: vmx| DICT --- USER DEFAULTS
Jun 04 11:57:30.328: vmx| DICT --- HOST DEFAULTS
Jun 04 11:57:30.328: vmx| DICT authd.client.port = 902
Jun 04 11:57:30.328: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Jun 04 11:57:30.328: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Jun 04 11:57:30.328: vmx| DICT prefvmx.minVmMemPct = 25
Jun 04 11:57:30.328: vmx| DICT prefvmx.allVMMemoryLimit = 5274
Jun 04 11:57:30.328: vmx| DICT prefvmx.useRecommendedLockedMemSize = TRUE
Jun 04 11:57:30.328: vmx| DICT mainMem.partialLazySave = TRUE
Jun 04 11:57:30.328: vmx| DICT mainMem.partialLazyRestore = TRUE
Jun 04 11:57:30.328: vmx| DICT --- SITE DEFAULTS
Jun 04 11:57:30.328: vmx| DICT authd.client.port = 902
Jun 04 11:57:30.328: vmx| DICT authd.proxy.vim = vmware-hostd:hostd-vmdb
Jun 04 11:57:30.328: vmx| DICT authd.proxy.nfc = vmware-hostd:ha-nfc
Jun 04 11:57:30.328: vmx| DICT prefvmx.minVmMemPct = 25
Jun 04 11:57:30.328: vmx| DICT prefvmx.allVMMemoryLimit = 5274
Jun 04 11:57:30.328: vmx| DICT prefvmx.useRecommendedLockedMemSize = TRUE
Jun 04 11:57:30.328: vmx| DICT mainMem.partialLazySave = TRUE
Jun 04 11:57:30.328: vmx| DICT mainMem.partialLazyRestore = TRUE
Jun 04 11:57:30.328: vmx| DICT --- GLOBAL SETTINGS
Jun 04 11:57:30.328: vmx| Msg_Hint: msg.guestos.xp (sent)
Jun 04 11:57:30.328: vmx| The Microsoft Windows XP product activation feature creates a key based on the virtual hardware in the virtual machine where it is installed. Changes in the virtual machine configuration may require you to reactivate the guest operating system. To minimize those changes, be sure to set the final memory size for the virtual machine and install VMware Tools before you activate Windows XP.
Jun 04 11:57:30.328: vmx| For more information about Windows XP product activation and virtual machines see our Web site at "http://vmware.com/info?id=21".
Jun 04 11:57:30.328: vmx| ---------------------------------------
Jun 04 11:57:30.468: vmx| hostCpuFeatures = 0x404001fc
Jun 04 11:57:30.468: vmx| hostNumPerfCounters = 2
Jun 04 11:57:30.468: vmx| CPU0: PMC: IA32, CORE 2 [c:0 f:1 e:1]
Jun 04 11:57:30.468: vmx| CPU1: PMC: IA32, CORE 2 [c:0 f:1 e:1]
Jun 04 11:57:30.468: vmx| MONITOR MODE: allowed modes : BT
Jun 04 11:57:30.468: vmx| MONITOR MODE: user requested modes : BT HV HWMMU
Jun 04 11:57:30.468: vmx| MONITOR MODE: guestOS preferred modes: BT HWMMU HV
Jun 04 11:57:30.468: vmx| MONITOR MODE: filtered list : BT
Jun 04 11:57:30.468: vmx| HV Settings: virtual exec = 'software'; virtual mmu = 'software'
Jun 04 11:57:30.531: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Jun 04 11:57:30.531: vmx| Host display topology 1280x1024.
Jun 04 11:57:30.531: vmx| SVGA using 2360x1770.
Jun 04 11:57:30.531: vmx| WSSCAN: reserved mem (in MB) min=32 max=5732 recommended=5732
Jun 04 11:57:30.531: vmx| WSSCAN: used rec mem (in MB) 5732
Jun 04 11:57:30.531: vmx| PSHARE: scan rate min 16 max 400
Jun 04 11:57:30.531: vmx| WSSCAN: Overhead 99614 paged 14213 nonpaged 32768 maxFBSize
Jun 04 11:57:30.546: vmx| WSSCAN 1 1 1240904 1313528 1467392 1249096 25 0
Jun 04 11:57:30.562: vmx| LICENSE using: 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware Server\Dormant\License.gsx.3.0-00'
Jun 04 11:57:30.671: vmx| LOG failed to remove stats\stats32-2 failed: Unknown error 3 (0x3)
Jun 04 11:57:30.671: vmx| LOG failed to rename stats\stats32-1 -> stats\stats32-2 failed: Unknown error 3 (0x3)
Jun 04 11:57:30.671: vmx| LOG failed to rename stats\stats32-0 -> stats\stats32-1 failed: Unknown error 3 (0x3)
Jun 04 11:57:30.671: vmx| LOG failed to rename stats\stats32 -> stats\stats32-0 failed: Unknown error 3 (0x3)
Jun 04 11:57:30.671: vmx| LOG failed to remove stats\stats64-2 failed: Unknown error 3 (0x3)
Jun 04 11:57:30.671: vmx| LOG failed to rename stats\stats64-1 -> stats\stats64-2 failed: Unknown error 3 (0x3)
Jun 04 11:57:30.671: vmx| LOG failed to rename stats\stats64-0 -> stats\stats64-1 failed: Unknown error 3 (0x3)
Jun 04 11:57:30.671: vmx| LOG failed to rename stats\stats64 -> stats\stats64-0 failed: Unknown error 3 (0x3)
Jun 04 11:57:30.671: vmx| LOG failed to remove stats32-2 failed: Unknown error 2 (0x2)
Jun 04 11:57:30.671: vmx| LOG failed to remove stats64-2 failed: Unknown error 2 (0x2)
Jun 04 11:57:30.671: vmx| Monitor_PowerOn: HostedVSMP skew tracking is disabled
Jun 04 11:57:30.671: vmx| Monitor_PowerOn: HostedVSMP crosscall yielding is disabled
Jun 04 11:57:30.671: vmx| vmm32-modules: [vmm.vmm32 .data:0x2b000-0x728 .sdata:0x2c000-0x4e4 .statvars:0x2d000-0x3a0 .peer:0x2e000-0x261c0 .shared:0x56000-0x12ac0 .bss:0x6a000-0x5c88 .rodata:0x71000-0xb430 .text:0x7d000-0x5902d .kstatvars:0x3000-0x0, mmu-pae.vmm32 .rodata:0x7c430-0x44 .data:0x2b728-0xc .peer:0x541c0-0x16c0 .shared:0x68ac0-0x2c0 .bss:0x6fca0-0x518 .text:0xd6030-0xa4e7 .comment:0x40000d26-0x10e .statvars:0x2000-0x0 .kstatvars:0x2000-0x0 .scb:0x400038a0-0x180 .shared_meta:0x40003c00-0x390 .peer_meta:0x40001020-0x210, sharedmmu-none.vmm32 .text:0xe0518-0x32 .comment:0x40000e34-0x12, pv-none.vmm32 .shared:0x68d80-0x180 .bss:0x701c0-0x84 .text:0xe054c-0xe6 .comment:0x40000e46-0x48 .shared_meta:0x40003f90-0x90, vprobe-none.vmm32 .text:0xe0634-0x79 .comment:0x40000e8e-0x12, hv-none.vmm32 .rodata:0x7c474-0x4 .data:0x1000-0x0 .peer:0x1000-0x0 .shared:0x1000-0x0 .bss:0x1000-0x0 .text:0xe06b0-0x2d .comment:0x40000ea0-0x12 .statvars:0x1000-0x0 .kstatvars:0x1000-0x0, gphys-sw.vmm32 .peer:0x55880-0x40 .shared:0x68f00-0x140 .bss:0x2000-0x0 .text:0xe06e0-0xb43 .comment:0x40000eb2-0x12 .scb:0x40003a20-0x60 .shared_meta:0x40004020-0x2a0 .peer_meta:0x40001230-0x60, vassert-none.vmm32 .text:0xe1224-0xf .comment:0x40000ec4-0x12, vmsafe-none.vmm32 .text:0xe1234-0xd .comment:0x40000ed6-0x12, <MonSrcFile> .rodata:0x7c478-0x36c]
Jun 04 11:57:30.687: vmx| KHZEstimate 1995000
Jun 04 11:57:30.687: vmx| MHZEstimate 1995
Jun 04 11:57:30.687: vmx| NumVCPUs 1
Jun 04 11:57:30.687: vmx| PShare: enabled 1, scanRate 32, checkRate 16
Jun 04 11:57:30.687: vmx| UUID: location-UUID is 56 4d 65 43 f1 00 90 d2-42 a4 a8 67 cb a6 93 01
Jun 04 11:57:30.687: vmx| UUID: location-UUID is 56 4d 27 ff 50 09 01 d4-27 b4 8b 15 7f 71 62 29
Jun 04 11:57:30.687: vmx| UUID: location-UUID is 56 4d 27 ff 50 09 01 d4-27 b4 8b 15 7f 71 62 29
Jun 04 11:57:30.687: vmx| AIOGNRC: numThreads=4 ide=1, scsi=0, passthru=1
Jun 04 11:57:30.687: vmx| WORKER: Creating new group with numThreads=4 (4)
Jun 04 11:57:30.687: vmx| Replay State = 0
Jun 04 11:57:30.687: vmx| minDEThreshold: 70
Jun 04 11:57:30.687: vmx| MM: Using partialmap, 65536 pages AC 0 CE 1 TM 0 DOHU 0
Jun 04 11:57:30.687: vmx| UUID: location-UUID is 56 4d 27 ff 50 09 01 d4-27 b4 8b 15 7f 71 62 29
Jun 04 11:57:30.687: vmx| FILE: ScanDirectory discarding M08789.lck from C:\Virtual Machines\VM_Fernwartung1\564d27ff-5009-01d4-27b4-8b157f716229.vmem.lck': invalid executionID.
Jun 04 11:57:30.687: vmx| MM: using 'C:\Virtual Machines\VM_Fernwartung1\564d27ff-5009-01d4-27b4-8b157f716229.vmem' as a paging file
Jun 04 11:57:30.687: vmx| Opened paging file C:\Virtual Machines\VM_Fernwartung1\564d27ff-5009-01d4-27b4-8b157f716229.vmem
Jun 04 11:57:30.687: vmx| Mapped mainmem as pageable
Jun 04 11:57:30.687: vmx| MMCHK: Disabling checks which are not forced, cannot do checks on certain processors.
Jun 04 11:57:30.687: vmx| MStat: Creating Stat vm.cpuusage
Jun 04 11:57:30.687: vmx| MStat: Creating Stat vm.ram
Jun 04 11:57:30.687: vmx| MStat: Creating Stat vm.uptime
Jun 04 11:57:30.687: vmx| MStat: Creating Stat vm.suspendTime
Jun 04 11:57:30.687: vmx| MStat: Creating Stat vm.powerOnTimeStamp
Jun 04 11:57:30.687: vmx| VMXAIOMGR: Using: simple=Generic unbuf=Compl
Jun 04 11:57:30.718: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Jun 04 11:57:30.718: vmx| DISK: OPEN ide0:0 'C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmdk' persistent R[]
Jun 04 11:57:30.734: vmx| FILE: ScanDirectory discarding M33115.lck from C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmdk.lck': invalid executionID.
Jun 04 11:57:30.906: vmx| DISKLIB-DSCPTR: Opened [0]: "VM_Fernwartung.vmdk" (0xa)
Jun 04 11:57:30.906: vmx| DISKLIB-LINK : Opened 'C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmdk' (0xa): monolithicSparse, 52428800 sectors / 25 GB.
Jun 04 11:57:30.906: vmx| DISKLIB-LIB : Opened "C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmdk" (flags 0xa).
Jun 04 11:57:30.906: vmx| DiskGetGeometry: Reading of disk partition table
Jun 04 11:57:30.921: vmx| DISK: OPEN 'C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmdk' Geo (16383/16/63) BIOS Geo (3263/255/63) freeSpace=175932 MB, ide
Jun 04 11:57:30.937: vmx| TimeTracker host to guest rate conversion 14344544316440 @ 1995000000Hz -> 14344544316440 @ 1995000000Hz
Jun 04 11:57:30.937: vmx| TimeTracker host to guest rate conversion ((x * 2147483648) >> 31) + 0
Jun 04 11:57:30.953: vmx| USB: Initializing 'Generic' backend
Jun 04 11:57:30.953: vmx| USBGW: Connected to HCMON version 3.1
Jun 04 11:57:30.953: vmx| USB: Initializing 'Virtual Hub' backend
Jun 04 11:57:30.953: vmx| USB: Initializing 'Virtual Mouse' backend
Jun 04 11:57:30.953: vmx| USB: Initializing 'Virtual Keyboard' backend
Jun 04 11:57:30.953: vmx| USB: Initializing 'Remote Device' backend
Jun 04 11:57:30.953: vmx| RemoteUSBVMX: no delay setting is TRUE.
Jun 04 11:57:30.953: vmx| USB: Initializing 'Virtual Mass Storage' backend
Jun 04 11:57:30.953: vmx| USB: Initializing 'Virtual CCID' backend
Jun 04 11:57:30.968: vmx| USB-CCID: Could not establish resource manager context for card ops: SCARD_E_NO_SERVICE(0x8010001d).
Jun 04 11:57:30.968: vmx| USB: Unable to initialize 'Virtual CCID' backend
Jun 04 11:57:30.968: vmx| USBGW: Skipping disk backing for file (C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmx).
Jun 04 11:57:30.984: vmx| USBGW: Skipping disk backing for file (C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmdk).
Jun 04 11:57:30.984: vmx| USBGW: Skipping disk backing for file (C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.vmsd).
Jun 04 11:57:30.984: vmx| USBGW: Skipping disk backing for file (C:\Virtual Machines\VM_Fernwartung1\VM_Fernwartung.nvram).
Jun 04 11:57:30.999: vmx| Host display topology 1280x1024.
Jun 04 11:57:30.999: vmx| SVGA using 2360x1770.
Jun 04 11:57:31.109: vmx| WORKER: Creating new group with numThreads=1 (5)
Jun 04 11:57:31.109: vmx| MKS REMOTE Loading VNC Configuration from VM config file
Jun 04 11:57:31.109: vmx| VLANCE: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks
Jun 04 11:57:31.109: vmx| VMXNET: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks, dontClusterSize is 128
Jun 04 11:57:31.109: vmx| NetPkt: checksum cycles/kB: C=113 asm1=1240 asm2=635
Jun 04 11:57:31.109: vmx| NetPkt: copy and sum cycles/kB: C=451 asm1=922 asm2=421
Jun 04 11:57:31.125: vmx| Chipset version: 0x13
Jun 04 11:57:31.171: vmx| DISKUTIL: ide0:0 : capacity=52428800
Jun 04 11:57:31.171: vmx| MStat: Creating Stat ide0:0.bytesread
Jun 04 11:57:31.171: vmx| MStat: Creating Stat ide0:0.byteswritten
Jun 04 11:57:31.171: vmx| DISKUTIL: ide0:0 : capacity=52428800
Jun 04 11:57:31.171: vmx| DISKUTIL: ide0:0 : geometry=3263/255/63
Jun 04 11:57:31.171: vmx| MStat: Creating Stat ide1:0.bytesread
Jun 04 11:57:31.171: vmx| MStat: Creating Stat ide1:0.byteswritten
Jun 04 11:57:31.171: vmx| DISKUTIL: ide1:0 : capacity=0
Jun 04 11:57:31.171: vmx| DISKUTIL: ide1:0 : geometry=0/0/0
Jun 04 11:57:31.171: vmx| SVGA: Advertising 3D acceleration.
Jun 04 11:57:31.171: vmx| Host display topology 1280x1024 with 1 displays.
Jun 04 11:57:31.171: vmx| SVGA using 2360x1770.
Jun 04 11:57:31.171: vmx| USB: Initializing 'UHCI' host controller
Jun 04 11:57:31.171: vmx| MStat: Creating Stat ethernet0.bytesread
Jun 04 11:57:31.171: vmx| MStat: Creating Stat ethernet0.byteswritten
Jun 04 11:57:31.171: vmx| Ethernet0 MAC Address: 00:0c:29:71:62:29
Jun 04 11:57:31.203: vmx| MStat: Creating Stat vm.heartbeat
Jun 04 11:57:31.203: vmx| DISKUTIL: ide0:0 : toolsVersion = 7397
Jun 04 11:57:31.203: vmx| TOOLS INSTALL initializing state to IDLE on power on.
Jun 04 11:57:31.250: vmx| PTSC to VMI Wallclock (nsec) 14345173728410 @ 1995000000Hz -> 1244109451000000000 @ 1000000000Hz
Jun 04 11:57:31.250: vmx| PTSC to VMI Wallclock (nsec) ((x * 2152865812) >> 32) + 1244102260436729389
Jun 04 11:57:31.250: vmx| PTSC to ParaTime RealCycles 0 @ 1995000000Hz -> 0 @ 1995000000Hz
Jun 04 11:57:31.250: vmx| PTSC to ParaTime RealCycles ((x * 1) >> 0) + 0
Jun 04 11:57:31.250: vmx| ParaTime RealCycles to PTSC 0 @ 1995000000Hz -> 0 @ 1995000000Hz
Jun 04 11:57:31.250: vmx| ParaTime RealCycles to PTSC ((x * 1) >> 0) + 0
Jun 04 11:57:31.250: vmx| memoryHotplug: Current size = 256MB, Minimum size = 256MB, Maximum size = 256MB
Jun 04 11:57:31.250: vmx| memoryHotplug: Entry[0]: 00000000000000A0-00000000000A0000
Jun 04 11:57:31.250: vmx| memoryHotplug: Entry[1]: 00000000001000A0-0000000010000000
Jun 04 11:57:31.250: vmx| guestCpuFeatures = 0x404001f8
Jun 04 11:57:31.250: vmx| guestCPUID vendor: GenuntelineI
Jun 04 11:57:31.250: vmx| guestCPUID name: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz
Jun 04 11:57:31.250: vmx| guestCPUID level 00000000, 0: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
Jun 04 11:57:31.250: vmx| guestCPUID level 00000001, 0: 0x000006fd 0x00010800 0x80000201 0x0febfbff
Jun 04 11:57:31.250: vmx| guestCPUID level 00000002, 0: 0x05b0b101 0x005657f0 0x00000000 0x2cb4307d
Jun 04 11:57:31.250: vmx| guestCPUID level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 00000004, 0: 0x04000121 0x01c0003f 0x0000003f 0x00000001
Jun 04 11:57:31.250: vmx| guestCPUID level 00000005, 0: 0x00000040 0x00000040 0x00000003 0x00000220
Jun 04 11:57:31.250: vmx| guestCPUID level 00000006, 0: 0x00000001 0x00000002 0x00000001 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 00000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 00000008, 0: 0x00000400 0x00000000 0x00000000 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 0000000a, 0: 0x07280202 0x00000000 0x00000000 0x00000503
Jun 04 11:57:31.250: vmx| guestCPUID level 40000000, 0: 0x40000010 0x61774d56 0x4d566572 0x65726177
Jun 04 11:57:31.250: vmx| guestCPUID level 40000010, 0: 0x001e70f8 0x000101d0 0x00000000 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 80000001, 0: 0x00000000 0x00000000 0x00000000 0x00100800
Jun 04 11:57:31.250: vmx| guestCPUID level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
Jun 04 11:57:31.250: vmx| guestCPUID level 80000003, 0: 0x44203229 0x43206f75 0x20205550 0x45202020
Jun 04 11:57:31.250: vmx| guestCPUID level 80000004, 0: 0x30303434 0x20402020 0x30302e32 0x007a4847
Jun 04 11:57:31.250: vmx| guestCPUID level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 80000006, 0: 0x00000000 0x00000000 0x08006040 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Jun 04 11:57:31.250: vmx| guestCPUID level 80000008, 0: 0x00003028 0x00000000 0x00000000 0x00000000
Jun 04 11:57:31.265: vmx| BusMemSample: initPercent 75 touched 0
Jun 04 11:57:31.281: vmx| VMX_PowerOn: ModuleTable_PowerOn = 1
Jun 04 11:57:31.281: vmx| VMX setting maximum IPC write buffers to 0 packets, 0 bytes
Jun 04 11:57:31.281: mks| Async MKS thread is alive
Jun 04 11:57:31.328: vcpu-0| APIC: version = 0x14, max LVT = 5
Jun 04 11:57:31.328: vcpu-0| APIC: LDR = 0x2000000, DFR = 0xffffffff
Jun 04 11:57:31.343: vcpu-0| guestCpuFeatures = 0x404001f8
Jun 04 11:57:31.343: vcpu-0| CPU reset: hard
Jun 04 11:57:31.343: vcpu-0| memoryHotplug: Entry[0]: 00000000000000A0-00000000000A0000
Jun 04 11:57:31.343: vcpu-0| memoryHotplug: Entry[1]: 00000000001000A0-0000000010000000
Jun 04 11:57:31.359: vcpu-0| VNET: Notification enabled for Ethernet0
Jun 04 11:57:31.359: vcpu-0| CDROM: Connecting ide1:0 to 'D:'. img=0 raw=0 remote=0
Jun 04 11:57:31.359: vcpu-0| Transitioned vmx/execState/val to poweredOn
Jun 04 11:57:31.421: vcpu-0| sz=3002336
Jun 04 11:57:31.437: vcpu-0| vmm32 initialized: Releasebuild-156745. cflags: 0x00000008.00040080.03000180.00000900
Jun 04 11:57:31.437: vcpu-0| MonitorInitNumaUnmapVMM32
Jun 04 11:57:32.265: vcpu-0| SVGA: Registering MemSpace at 0xd0000000(0x0) and 0xd8000000(0x0)
Jun 04 11:57:32.281: vcpu-0| SVGA: Unregistering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Jun 04 11:57:32.453: vcpu-0| SVGA: Registering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Jun 04 11:57:32.468: vcpu-0| SVGA: Unregistering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Jun 04 11:57:32.484: vcpu-0| SVGA: Registering IOSpace at 0x10d0
Jun 04 11:57:32.484: vcpu-0| SVGA: Registering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Jun 04 11:57:32.484: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.500: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.515: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.531: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.546: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.781: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.781: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.781: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.796: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.812: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.828: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:32.859: vcpu-0| VIDE: Curr CHS info cyls: 17475 heads: 15 sects: 63 lba_cap: 52428800
Jun 04 11:57:32.906: vcpu-0| BIOS-UUID is 56 4d 27 ff 50 09 01 d4-27 b4 8b 15 7f 71 62 29
Jun 04 11:57:33.828: vmx| VMXVmdbLoadUsbDevices: New set of 1 USB devices
Jun 04 11:57:33.828: vmx| USB: Found device [name:USB\ Flash\ Drive vid:125f pid:1036 path:1/3/0 speed:high family:storage]
Jun 04 11:57:35.093: mks| Create Memory BIO succeeded.
Jun 04 11:57:35.125: mks| Create Memory BIO succeeded.
Jun 04 11:57:35.156: mks| Ignoring update request in VGA_Expose (mode change pending).
Jun 04 11:57:35.687: mks| VNCENCODE 2 encoding mode change: (640x480x24depth,32bpp,2560bytes/line)
Jun 04 11:57:35.703: mks| VNCENCODE 2 encoding mode change: (640x480x24depth,32bpp,2560bytes/line)
Jun 04 11:57:36.125: mks| VNCENCODE 2 encoding mode change: (720x400x24depth,32bpp,2880bytes/line)
Jun 04 11:57:36.734: mks| VNCENCODE 2 encoding mode change: (640x480x24depth,32bpp,2560bytes/line)
Jun 04 11:57:39.625: vcpu-0| SVGA: Unregistering IOSpace at 0x10d0
Jun 04 11:57:39.625: vcpu-0| SVGA: Unregistering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Jun 04 11:57:39.640: vcpu-0| SVGA: Registering IOSpace at 0x10d0
Jun 04 11:57:39.640: vcpu-0| SVGA: Registering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Jun 04 11:57:39.656: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.656: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.672: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.672: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.672: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.672: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.672: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.672: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.672: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.672: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.687: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.703: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.718: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:39.734: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.156: vcpu-0| PCIBridge4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.172: vcpu-0| pciBridge4:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.187: vcpu-0| pciBridge4:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.187: vcpu-0| pciBridge4:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.203: vcpu-0| pciBridge4:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.219: vcpu-0| pciBridge4:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.234: vcpu-0| pciBridge4:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.250: vcpu-0| pciBridge4:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.265: vcpu-0| PCIBridge5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.281: vcpu-0| pciBridge5:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.297: vcpu-0| pciBridge5:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.312: vcpu-0| pciBridge5:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.328: vcpu-0| pciBridge5:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.328: vcpu-0| pciBridge5:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.375: vcpu-0| pciBridge5:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.390: vcpu-0| pciBridge5:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.406: vcpu-0| PCIBridge6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.422: vcpu-0| pciBridge6:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.437: vcpu-0| pciBridge6:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.469: vcpu-0| pciBridge6:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.484: vcpu-0| pciBridge6:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.500: vcpu-0| pciBridge6:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.515: vcpu-0| pciBridge6:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.515: vcpu-0| pciBridge6:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.531: vcpu-0| PCIBridge7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.547: vcpu-0| pciBridge7:1: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.562: vcpu-0| pciBridge7:2: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.578: vcpu-0| pciBridge7:3: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.594: vcpu-0| pciBridge7:4: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.609: vcpu-0| pciBridge7:5: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.625: vcpu-0| pciBridge7:6: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:41.640: vcpu-0| pciBridge7:7: ISA/VGA decoding enabled (ctrl 0004)
Jun 04 11:57:43.328: vcpu-0| VIDE: Curr CHS info cyls: 17475 heads: 15 sects: 63 lba_cap: 52428800
Jun 04 11:57:44.359: vmx| CDROM: Mode Sense for Unsupported Page 0x1B
Jun 04 11:57:44.359: vmx| SCSI DEVICE (ide1:0): MODE SENSE(10) for unsupported page 0x1b
Jun 04 11:57:44.390: vcpu-0| VIDE: (0x1f0) OUTB Cmd 0xf5, Unknown ATA Command on drive 0
Jun 04 11:58:13.407: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
Jun 04 11:58:13.422: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
Jun 04 11:58:13.422: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
Jun 04 11:58:13.422: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
Jun 04 11:58:13.516: vcpu-0| The guest OS tried to update the CPU's microcode.
Jun 04 11:58:13.516: vcpu-0| Since a newer microcode version exists, please consider updating the microcode on your host.
Jun 04 11:58:13.626: vcpu-0| VNET: Notification enabled for Ethernet0
Jun 04 11:58:13.626: vcpu-0| Guest: VMXNET: Initialization completed successfully. Version 2.0 Jul 9 2008.
Jun 04 11:58:13.626: vcpu-0| Guest: VMXNET: Features:
Jun 04 11:58:13.626: vcpu-0| Guest: VMXNET: Vmxnet rx ringLen1 = 100, ringLen2 = 1
Jun 04 11:58:13.641: vcpu-0| SVGA: Unregistering IOSpace at 0x10d0
Jun 04 11:58:13.641: vcpu-0| SVGA: Unregistering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Jun 04 11:58:13.657: vcpu-0| SVGA: Registering IOSpace at 0x10d0
Jun 04 11:58:13.657: vcpu-0| SVGA: Registering MemSpace at 0xd0000000(0xd0000000) and 0xd8000000(0xd8000000)
Jun 04 11:58:14.360: vcpu-0| Guest OS = 0x5008
Jun 04 11:58:14.422: vcpu-0| UHCI: Global Reset
Jun 04 11:58:18.610: vmx| ide1:0: Command READ(10) took 2.804 seconds (ok)
Jun 04 11:58:25.048: mks| MKS switching absolute mouse on
Jun 04 11:58:28.360: mks| SVGA: enabling escape command
Jun 04 11:58:28.360: vcpu-0| Guest display topology changed: numDisplays 1
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: SVGADBG: ready
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: This is the primary surface: PPDEV e1488010
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Display driver is out of sync with virtual hardware. Disabling 3d.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Display Acceleration: DirectDraw:ok, Direct3D:disabled.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: DrvGetDirectDrawInfo: Overlay flags set
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: This is the primary surface: PPDEV e1488010
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Display driver is out of sync with virtual hardware. Disabling 3d.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Display Acceleration: DirectDraw:ok, Direct3D:disabled.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 04 11:58:28.360: vcpu-0| Guest: vmx_fb: DrvGetDirectDrawInfo: Overlay flags set
Jun 04 11:58:28.376: mks| VNCENCODE 2 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 11:58:29.985: mks| HostOps showCursor before defineCursor!
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 0
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 30
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 31
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 32
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 33
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 35
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 36
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 38
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 45
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 46
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 47
Jun 04 11:58:36.251: vcpu-0| CDROM: Emulate GET CONFIGURATION RT 0 start feature 259
Jun 04 11:58:38.376: vcpu-0| Guest: vmdesched:driver:vmdesched Descheduled Time Accounting Service [Driver] loaded
Jun 04 11:58:40.923: vcpu-0| MKS Backdoor get pointer: first time, notify tools are running
Jun 04 11:58:43.345: vcpu-0| TOOLS unified loop capability requested by 'toolbox-dnd'; now sending options via TCLO
Jun 04 11:58:43.376: vcpu-0| GuestRpc: Channel 0, guest application toolbox-dnd.
Jun 04 11:58:44.658: vcpu-0| GuestRpc: Channel 1, guest application toolbox.
Jun 04 11:58:44.658: vcpu-0| TOOLS Reducing idleLoopSpinUS to 500us
Jun 04 11:58:44.658: vcpu-0| TOOLS sending 'OS_PowerOn' (3) state change request
Jun 04 11:58:44.814: vcpu-0| Guest: toolbox: Version: build-156745
Jun 04 11:58:44.814: vcpu-0| TOOLS unified loop capability requested by 'toolbox'; now sending options via TCLO
Jun 04 11:58:44.814: vcpu-0| TOOLS autoupgrade protocol version 2
Jun 04 11:58:44.830: vcpu-0| TOOLS ToolsCapabilityGuestTempDirectory received 1 C:\WINDOWS\TEMP
Jun 04 11:58:44.830: vcpu-0| TOOLS ToolsCapabilityGuestConfDirectory received C:\Dokumente und Einstellungen\All Users\Anwendungsdaten\VMware\VMware Tools
Jun 04 11:58:44.830: vcpu-0| TOOLS setting the tools version to '7397'
Jun 04 11:58:45.080: vcpu-0| TOOLS installed version 7397, available version 7397
Jun 04 11:58:45.080: vcpu-0| TOOLS will not be autoupgraded.
Jun 04 11:58:45.080: vcpu-0| TOOLS Setting autoupgrade-checked TRUE.
Jun 04 11:58:45.798: vcpu-0| TOOLS state change 3 returned status 1
Jun 04 12:06:20.388: vmx| VMXVmdbLoadUsbDevices: New set of 0 USB devices
Jun 04 12:33:21.100: vmx| VMXVmdbLoadUsbDevices: New set of 1 USB devices
Jun 04 12:33:21.100: vmx| USB: Found device [name:USB\ Flash\ Drive vid:125f pid:1036 path:1/3/0 speed:high family:storage]
Jun 04 13:10:53.535: vmx| TOOLS received request in VMX to set option 'synctime' -> '0'
Jun 04 13:10:53.550: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Jun 04 13:10:53.644: vmx| USB: Connecting device 0x3000000125f1036
Jun 04 13:10:53.644: vmx| Msg_Hint: msg.usb.generic.stopDevice (sent)
Jun 04 13:10:53.644: vmx| A USB device is about to be unplugged from the host and connected to this virtual machine. It will first be stopped to enable safe removal. With some devices, the host may display the message "The device can now safely be removed."
Jun 04 13:10:53.644: vmx| ---------------------------------------
Jun 04 13:10:55.785: vmx| VMXVmdbLoadUsbDevices: New set of 0 USB devices
Jun 04 13:10:57.035: vmx| USBG: CONNREQ: Dequeued head request after 3378 ms for [name:USB\ Flash\ Drive vid:125f pid:1036 path:1/3/0 speed:high family:storage]
Jun 04 13:10:57.035: vmx| Msg_Hint: msg.usb.hcAutoConnect (sent)
Jun 04 13:10:57.035: vmx| The device "USB Flash Drive" was unable to connect to its ideal host controller. An attempt will be made to connect this device to the best available host controller. This may result in an undefined behavior for this device.---------------------------------------
Jun 04 13:10:57.035: vmx| USB: Adding autoconnect pattern [path:1/3/0 autoclean:1] in slot 0
Jun 04 13:10:57.050: vmx| USB: Device [name:USB\ Flash\ Drive vid:125f pid:1036 path:1/3/0 speed:high family:storage] should already be connected
Jun 04 13:10:57.050: vmx| VMXVmdbLoadUsbDevices: New set of 1 USB devices
Jun 04 13:10:57.050: vmx| USB: Found device [name:USB\ Flash\ Drive vid:125f pid:1036 path:1/3/0 speed:high family:storage]
Jun 04 13:10:57.722: vmx| USBG warning: can't reset port usbioerr 'NOT_CONFIGURED'
Jun 04 13:10:57.816: vmx| USBG warning: can't reset port usbioerr 'NOT_CONFIGURED'
Jun 04 13:10:57.988: vmx| USB: Device [name:USB\ Flash\ Drive vid:125f pid:1036 path:1/3/0 speed:high family:storage] should already be connected
Jun 04 13:10:58.207: vmx| USBIO: Detect usb-storage class
Jun 04 13:12:39.912: mks| SOCKET 2 (908) recv error 10054: Unknown error 10054 (0x2746)
Jun 04 13:12:39.912: mks| SOCKET 2 (908) destroying VNC backend on socket error: 1
Jun 04 13:12:44.991: mks| SVGA: display status changed, using optimizations for local consoles.
Jun 04 13:48:36.073: vmx| USBGW: Submit IO failed (0xe000100a)
Jun 04 13:48:36.073: vmx| USBGW: Unhandled URB status (e000100a)
Jun 04 13:48:36.073: vmx| USB: Disconnecting device 0x3000000125f1036
Jun 04 13:48:36.073: vmx| USBG warning: failed to abort pipe usbioerr 'DEVICE_NOT_PRESENT'
Jun 04 13:48:36.073: vmx| USBG warning: failed to abort pipe usbioerr 'DEVICE_NOT_PRESENT'
Jun 04 13:48:36.073: vmx| USBG warning: failed to abort pipe usbioerr 'DEVICE_NOT_PRESENT'
Jun 04 13:48:36.073: vmx| USB: Autoconnecting device "USB Flash Drive" matching pattern [path:1/3/0 autoclean:1]
Jun 04 13:48:36.073: vmx| USB: Connecting device 0x3000000125f1036
Jun 04 13:48:36.105: vmx| Warning d:/build/ob/bora-156745/bora/lib/usblib/usbGenericWin32.c:3016
Jun 04 13:48:36.105: vmx| USB: Connecting device [name:USB\ Flash\ Drive vid:125f pid:1036 path:1/3/0 speed:high family:storage] failed: 5
Jun 04 13:48:36.105: vmx| VMXVmdbLoadUsbDevices: New set of 1 USB devices
Jun 04 13:48:36.105: vmx| USB: Found device [name:USB\ Flash\ Drive vid:125f pid:1036 path:1/3/0 speed:high family:storage]
Jun 04 13:48:36.120: vmx| VMXVmdbLoadUsbDevices: New set of 0 USB devices
Jun 04 13:57:29.634: mks| VNCENCODE 3 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 13:57:31.196: mks| VNCENCODE 3 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 13:57:35.040: mks| SVGA: display status changed, using optimizations for remote consoles.
Jun 04 14:06:50.935: vmx| DISKLIB-LIB : numIOs = 50000 numMergedIOs = 3161 numSplitIOs = 2226
Jun 04 14:59:31.014: mks| SOCKET 3 (1484) recv error 10054: Unknown error 10054 (0x2746)
Jun 04 14:59:31.014: mks| SOCKET 3 (1484) destroying VNC backend on socket error: 1
Jun 04 14:59:36.390: mks| SVGA: display status changed, using optimizations for local consoles.
Jun 04 15:39:46.653: mks| VNCENCODE 4 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 15:39:50.481: mks| SVGA: display status changed, using optimizations for remote consoles.
Jun 04 15:39:51.388: mks| VNCENCODE 4 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 15:54:39.207: mks| SOCKET 4 (1484) recv error 10054: Unknown error 10054 (0x2746)
Jun 04 15:54:39.207: mks| SOCKET 4 (1484) destroying VNC backend on socket error: 1
Jun 04 15:54:44.176: mks| SVGA: display status changed, using optimizations for local consoles.
Jun 04 15:58:40.166: mks| VNCENCODE 5 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 15:58:40.213: mks| VNCENCODE 5 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 15:58:44.260: mks| SVGA: display status changed, using optimizations for remote consoles.
Jun 04 16:46:35.428: mks| SOCKET 5 (1556) recv error 10054: Unknown error 10054 (0x2746)
Jun 04 16:46:35.428: mks| SOCKET 5 (1556) destroying VNC backend on socket error: 1
Jun 04 16:46:35.444: mks| SVGA: display status changed, using optimizations for local consoles.
Jun 04 17:00:06.918: mks| VNCENCODE 6 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 17:00:06.964: mks| VNCENCODE 6 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 04 17:00:09.730: mks| SVGA: display status changed, using optimizations for remote consoles.
Jun 04 17:05:08.988: vmx| DISKLIB-LIB : numIOs = 100000 numMergedIOs = 5684 numSplitIOs = 3668
Jun 04 17:10:21.308: mks| SOCKET 6 (1484) recv error 10054: Unknown error 10054 (0x2746)
Jun 04 17:10:21.308: mks| SOCKET 6 (1484) destroying VNC backend on socket error: 1
Jun 04 17:10:23.324: mks| SVGA: display status changed, using optimizations for local consoles.
Jun 04 20:55:03.482: vmx| DISKLIB-LIB : numIOs = 150000 numMergedIOs = 7701 numSplitIOs = 5143
Jun 05 00:54:28.023: vmx| DISKLIB-LIB : numIOs = 200000 numMergedIOs = 9665 numSplitIOs = 6390
Jun 05 04:49:43.991: vmx| DISKLIB-LIB : numIOs = 250000 numMergedIOs = 11632 numSplitIOs = 7780
Jun 05 08:42:15.129: vmx| DISKLIB-LIB : numIOs = 300000 numMergedIOs = 13624 numSplitIOs = 8852
Jun 05 09:13:59.756: mks| VNCENCODE 7 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 05 09:13:59.771: mks| VNCENCODE 7 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 05 09:14:04.443: mks| SVGA: display status changed, using optimizations for remote consoles.
Jun 05 09:18:00.121: mks| SOCKET 7 (1664) recv error 10054: Unknown error 10054 (0x2746)
Jun 05 09:18:00.121: mks| SOCKET 7 (1664) destroying VNC backend on socket error: 1
Jun 05 09:18:03.027: mks| SVGA: display status changed, using optimizations for local consoles.
Jun 05 11:00:08.035: mks| VNCENCODE 8 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 05 11:00:08.035: mks| VNCENCODE 8 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 05 11:00:11.863: mks| SVGA: display status changed, using optimizations for remote consoles.
Jun 05 11:01:47.444: mks| SOCKET 8 (1672) recv error 10054: Unknown error 10054 (0x2746)
Jun 05 11:01:47.444: mks| SOCKET 8 (1672) destroying VNC backend on socket error: 1
Jun 05 11:01:49.975: mks| SVGA: display status changed, using optimizations for local consoles.
Jun 05 11:47:59.759: vmx| DISKLIB-LIB : numIOs = 350000 numMergedIOs = 15816 numSplitIOs = 10263
Jun 05 11:49:40.432: mks| VNCENCODE 9 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 05 11:49:40.432: mks| VNCENCODE 9 encoding mode change: (1280x1024x24depth,32bpp,5120bytes/line)
Jun 05 11:49:41.041: mks| SVGA: display status changed, using optimizations for remote consoles.
Jun 05 11:49:50.651: mks| SVGA: enabling escape command
Jun 05 11:49:50.651: vcpu-0| Guest display topology changed: numDisplays 1
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: SVGADBG: ready
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: This is the primary surface: PPDEV e1484010
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Display driver is out of sync with virtual hardware. Disabling 3d.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Display Acceleration: DirectDraw:ok, Direct3D:disabled.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: DrvGetDirectDrawInfo: Overlay flags set
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: This is the primary surface: PPDEV e1484010
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Display driver is out of sync with virtual hardware. Disabling 3d.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Display Acceleration: DirectDraw:ok, Direct3D:disabled.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 05 11:49:50.651: vcpu-0| Guest: vmx_fb: DrvGetDirectDrawInfo: Overlay flags set
Jun 05 11:49:50.651: mks| VNCENCODE 9 encoding mode change: (800x600x24depth,32bpp,3200bytes/line)
Jun 05 11:49:50.979: mks| VNCENCODE 9 show cursor with invalid cursor definition (bug 51988)
Jun 05 11:57:29.925: vmx| LICENSE using: 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware Server\Dormant\License.gsx.3.0-00'
Jun 05 12:02:58.261: mks| SOCKET 9 (1668) recv error 10054: Unknown error 10054 (0x2746)
Jun 05 12:02:58.261: mks| SOCKET 9 (1668) destroying VNC backend on socket error: 1
Jun 05 12:03:03.590: mks| SVGA: display status changed, using optimizations for local consoles.
Jun 05 20:06:22.346: vmx| DISKLIB-LIB : numIOs = 400000 numMergedIOs = 17999 numSplitIOs = 10831
Jun 06 06:28:12.451: vmx| DISKLIB-LIB : numIOs = 450000 numMergedIOs = 19948 numSplitIOs = 11524
Jun 06 11:57:29.264: vmx| LICENSE using: 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware Server\Dormant\License.gsx.3.0-00'
Jun 06 17:09:47.695: vmx| DISKLIB-LIB : numIOs = 500000 numMergedIOs = 21668 numSplitIOs = 11806
Jun 07 03:39:09.841: vmx| DISKLIB-LIB : numIOs = 550000 numMergedIOs = 23618 numSplitIOs = 12353
Jun 07 11:57:28.616: vmx| LICENSE using: 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware Server\Dormant\License.gsx.3.0-00'
Jun 07 14:18:07.082: vmx| DISKLIB-LIB : numIOs = 600000 numMergedIOs = 25487 numSplitIOs = 12595
Jun 08 00:59:24.732: vmx| DISKLIB-LIB : numIOs = 650000 numMergedIOs = 27280 numSplitIOs = 12859
Jun 08 08:58:58.934: mks| VNCENCODE 10 encoding mode change: (800x600x24depth,32bpp,3200bytes/line)
Jun 08 08:58:58.934: mks| VNCENCODE 10 encoding mode change: (800x600x24depth,32bpp,3200bytes/line)
Jun 08 08:59:01.340: mks| SVGA: display status changed, using optimizations for remote consoles.
Jun 08 08:59:16.700: mks| SVGA: enabling escape command
Jun 08 08:59:16.700: vcpu-0| Guest display topology changed: numDisplays 1
Jun 08 08:59:16.700: vcpu-0| Guest: vmx_fb: SVGADBG: ready
Jun 08 08:59:16.700: vcpu-0| Guest: vmx_fb: This is the primary surface: PPDEV e1504010
Jun 08 08:59:16.700: vcpu-0| Guest: vmx_fb: Display driver is out of sync with virtual hardware. Disabling 3d.
Jun 08 08:59:16.700: vcpu-0| Guest: vmx_fb: Current hardware revision: 0.0.
Jun 08 08:59:16.700: vcpu-0| Guest: vmx_fb: Driver compiled against: 2.0.
Jun 08 08:59:16.700: vcpu-0| Guest: vmx_fb: Display Acceleration: DirectDraw:ok, Direct3D:disabled.
Jun 08 08:59:16.700: vcpu-0| Guest:

stell mal den 3d-support ab

[quote]Guest: vmx_fb: Display driver is out of sync with virtual hardware. Disabling 3d. [quote]
Hast du nicht den neusten VMware SVGA 2 Treiber installiert ???

Dazu würde ich etwas an diesen Einstellungen verändern.

Jun 04 11:57:30.328: vmx| DICT prefvmx.minVmMemPct = 25
Jun 04 11:57:30.328: vmx| DICT prefvmx.allVMMemoryLimit = 5274
Jun 04 11:57:30.328: vmx| DICT prefvmx.useRecommendedLockedMemSize = TRUE

Damit wird der Host unnötig mit Swappen belastet und der Gast wird dadurch ausgebremst. Wenn du mit diesen Einstellungen den Fokus von der VM auf den Host verschiebst, würde das auch die Ruckler/lahme Reaktion im Gast/Host erklären.

edit:

Dayworker hat geschrieben:Dazu würde ich etwas an diesen Einstellungen verändern.

Jun 04 11:57:30.328: vmx| DICT prefvmx.minVmMemPct = 25
Jun 04 11:57:30.328: vmx| DICT prefvmx.allVMMemoryLimit = 5274
Jun 04 11:57:30.328: vmx| DICT prefvmx.useRecommendedLockedMemSize = TRUE

Damit wird der Host unnötig mit Swappen belastet und der Gast wird dadurch ausgebremst. Wenn du mit diesen Einstellungen den Fokus von der VM auf den Host verschiebst, würde das auch die Ruckler/lahme Reaktion im Gast/Host erklären.

Ich hab nun prefvmx.minVmMemPct auf 25 gesetzt.
außerdem den 3D Support eben abgeschaltet, allerdings hab ich immernoch n delay

Memory Swapping deaktiviert und ich hab aufjeden Fall die VMWARE SVGA II Treiber installiert.
Ob aktuellste Version oder nicht kann ich nicht sagen.
Version: 11.6.0.9

Also wenn du schon prefvmx.allVMMemoryLimit = "5274MB" für VMware reservierst, solltest du auch ausreichend Speicher im Host haben. Oder hat es einen Grund warum du nur prefvmx.minVmMemPct = "25" % davon im Speicher behalten willst und trotzdem den Speicher mit prefvmx.useRecommendedLockedMemSize = "TRUE" vor dem unnützen Auslagern schützen willst?

Hast du die Hardwarebeschleunigung in den erweiterten Displayeinstellungen im Gast/Host aktiviert? Der Schieberegler sollte ganz rechts stehen.

Ich hab mal wieder etwas rumgewurschtelt und es funktioniert immer noch nicht.

Dayworker, dass mit den 25% versteh ich nicht ganz.
Ich habs nirgends bewusst eingestellt.

Kann ich dass einfach auf 0 stellen?

EDIT:
Per RDP funktionieren die Vms wunderbar

Ui, dein letztes Posting in dem Thread ist ja schon ein halbes Jahr her.

Wenn ich mich richtig entsinne und VMware die Voreinstellung nicht wieder geändert hat, ist prefvmx.minVmMemPct = "25" die Voreinstellung. D.h., der Server behält nur 25% des für ihn reservierten RAMs auch im RAM vor und der Rest wird direkt als Auslagerungsfähig gekennzeichnet. An sich kein Problem, wenn du jedoch gleichzeitig mit prefvmx.useRecommendedLockedMemSize = "TRUE" hantierst, widerspricht das obigen Eintrag und Seltsamkeiten, wie eine träge Reaktion unter Last, in der VM wären sher gut möglich.
Allerdings hat das nichts mit einiem unwilligen Consolen-Plugin zu tun. Ist bei dir die grafische Anzeige eigentlich größer als die physikalische (Stichwort Virtuelle Bildschirmauflösung) deines Monitors? Sonstige Unschärfen könnten auch auf ein Problem deiner Chipsatzgrafik hindeuten.