VMware-Forum

Hallo,
ich habe mein laufendes System, eine XP Professional Maschine mit dem VMWare Converter (aktuelle Version) konvertiert und möchte diese VM auf meinem Win 7 System laufen lassen. Die Konvertierung lief ohne Fehler durch, aber beim Start mit dem VMWare Player (auch aktuelle Version) bekomme ich einen schönen Bluescreen mit dem Stop Fehler 7b. Nun habe ich schon selbst im Netz recherchiert, komme aber nicht mehr weiter.

Ich stelle meine vmx-Datei mal hier rein in der Hoffnung, dass vielleicht so jemand herausfindet, wo das Problem liegt und was ich tun kann.

.encoding = "windows-1252"
bios.forceSetupOnce = "FALSE"
config.version = "8"
virtualHW.version = "8"
memsize = "2664"
MemAllowAutoScaleDown = "FALSE"
displayName = "MANU3"
guestOS = "winxppro"
numvcpus = "2"
sound.present = "TRUE"
sound.filename = "-1"
sound.autodetect = "TRUE"
usb.present = "TRUE"
ethernet0.present = "TRUE"
ethernet0.addressType = "generated"
ethernet0.connectionType = "bridged"
ethernet0.startConnected = "TRUE"
ethernet1.present = "TRUE"
ethernet1.addressType = "generated"
ethernet1.connectionType = "bridged"
ethernet1.startConnected = "TRUE"
ethernet2.present = "TRUE"
ethernet2.addressType = "generated"
ethernet2.connectionType = "bridged"
ethernet2.startConnected = "TRUE"
ide0:0.present = "TRUE"
ide0:0.fileName = "MANU3.vmdk"
ide0:1.present = "TRUE"
ide0:1.autodetect = "TRUE"
ide0:1.filename = "auto detect"
ide0:1.deviceType = "atapi-cdrom"
mks.enable3d = "TRUE"
vmci0.present = "TRUE"
ehci.present = "TRUE"
pciBridge0.present = "TRUE"
tools.upgrade.policy = "useGlobal"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
extendedConfigFile = "MANU3.vmxf"
virtualHW.productCompatibility = "hosted"
ethernet0.generatedAddress = "00:0c:29:99:64:69"
ethernet0.pciSlotNumber = "33"
ethernet1.generatedAddress = "00:0c:29:99:64:73"
ethernet1.pciSlotNumber = "34"
ethernet2.generatedAddress = "00:0c:29:99:64:7d"
ethernet2.pciSlotNumber = "35"
usb.pciSlotNumber = "32"
ehci.pciSlotNumber = "37"
sound.pciSlotNumber = "36"
vmci0.id = "983131241"
vmci0.pciSlotNumber = "38"
uuid.location = "56 4d 54 89 f3 77 93 37-d6 ac 36 3c 3a 99 64 69"
uuid.bios = "56 4d 54 89 f3 77 93 37-d6 ac 36 3c 3a 99 64 69"
cleanShutdown = "FALSE"
replay.supported = "FALSE"
replay.filename = ""
ide0:0.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
usb:1.present = "TRUE"
ethernet0.generatedAddressOffset = "0"
ethernet1.generatedAddressOffset = "10"
ethernet2.generatedAddressOffset = "20"
vmotion.checkpointFBSize = "134217728"
softPowerOff = "FALSE"
usb:1.speed = "2"
usb:1.deviceType = "hub"
usb:1.port = "1"
usb:1.parent = "-1"
tools.remindInstall = "TRUE"
usb:0.present = "TRUE"
usb:0.deviceType = "hid"
usb:0.port = "0"
usb:0.parent = "-1"


Vielen Dank! ManuT

Der Converter hat aus der physischen HD eine IDE-Platte gemacht und sie an den virtuellen IDE-Controller der Maschine gesteckt. Der STOP-Code (INACCESSIBLE_BOOT_DEVICE) deutet darauf hin, dass in der "CriticalDeviceDatabase" der Registry von Windows XP der Eintrag für den Intel IDE Controller fehlt oder fehlerhaft ist.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\pci#ven_8086&dev_7111 -> Service -> intelide

Ich würde die VM von einem ISO-Abbild einer startfähigen Service-CD (BartPE) booten und die Registry-Einträge korrigieren bzw. ergänzen. Es gibt aber möglicherweise noch einfachere Herangehensweisen von anderen Forums-Teilnehmern.

einfachste Variante:

vmdk auf scsi0:0 konfigurieren und dann per Converter nochmal "reconfigure machine" ausfuehren.

Beispiele dafuer habe ich schon x mal im Converterforum gepostet.

Bei Bedarf schreib ich dir die vmx eben um

Das wäre super super nett!

Fauler Hund

---------------------------------------- die roten Zeilen sind editiert ------------------------------


.encoding = "windows-1252"
MemAllowAutoScaleDown = "FALSE"
bios.forceSetupOnce = "FALSE"
cleanShutdown = "FALSE"
config.version = "8"
displayName = "kein Bock zu suchen"
ehci.pciSlotNumber = "37"
ehci.present = "TRUE"
ethernet0.addressType = "generated"
ethernet0.connectionType = "bridged"
ethernet0.generatedAddress = "00:0c:29:99:64:69"
ethernet0.generatedAddressOffset = "0"
ethernet0.pciSlotNumber = "33"
ethernet0.present = "TRUE"
ethernet0.startConnected = "TRUE"
ethernet1.addressType = "generated"
ethernet1.connectionType = "bridged"
ethernet1.generatedAddress = "00:0c:29:99:64:73"
ethernet1.generatedAddressOffset = "10"
ethernet1.pciSlotNumber = "34"
ethernet1.present = "TRUE"
ethernet1.startConnected = "TRUE"
ethernet2.addressType = "generated"
ethernet2.connectionType = "bridged"
ethernet2.generatedAddress = "00:0c:29:99:64:7d"
ethernet2.generatedAddressOffset = "20"
ethernet2.pciSlotNumber = "35"
ethernet2.present = "TRUE"
ethernet2.startConnected = "TRUE"
extendedConfigFile = "MANU3.vmxf"
guestOS = "winxppro"
ide0:0.autodetect = "TRUE"
ide0:0.deviceType = "atapi-cdrom"
ide0:0.filename = "auto detect"
ide0:0.present = "TRUE"
memsize = "2664"
mks.enable3d = "TRUE"
numvcpus = "2"
pciBridge0.pciSlotNumber = "17"
pciBridge0.present = "TRUE"
pciBridge4.pciSlotNumber = "21"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge5.pciSlotNumber = "22"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge6.pciSlotNumber = "23"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge7.pciSlotNumber = "24"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
replay.filename = ""
replay.supported = "FALSE"
scsi0.present = "TRUE"
scsi0.virtualDev = "buslogic"
scsi0:0.fileName = "MANU3.vmdk"
scsi0:0.present = "TRUE"
scsi0:0.redo = ""
softPowerOff = "FALSE"
sound.autodetect = "TRUE"
sound.filename = "-1"
sound.pciSlotNumber = "36"
sound.present = "TRUE"
tools.remindInstall = "TRUE"
tools.upgrade.policy = "useGlobal"
usb.pciSlotNumber = "32"
usb.present = "TRUE"
usb:0.deviceType = "hid"
usb:0.parent = "-1"
usb:0.port = "0"
usb:0.present = "TRUE"
usb:1.deviceType = "hub"
usb:1.parent = "-1"
usb:1.port = "1"
usb:1.present = "TRUE"
usb:1.speed = "2"
virtualHW.productCompatibility = "hosted"
virtualHW.version = "8"
vmci0.id = "983131241"
vmci0.pciSlotNumber = "38"
vmci0.present = "TRUE"

-----------------------------------------------------------------------------------------------

Nachdem editieren - starte den Converter und lass die Option "configure machine" laufen

Vielen, vielen Dank Ulli!!!! Es läuft jetzt alles super. Man, was hätte ich nur ohne Dich gemacht...

ManuT