OK! Hier mal der Inhalt der beiden Dateien:
Hier die vmnetnat.conf:
# Windows NAT configuration file
[host]
# NAT gateway address
ip = 192.168.200.2/24
hostMAC = 00:50:56:C0:00:08
# enable configuration; disabled by default for security reasons
#configport = 33445
# VMnet device if not specified on command line
device = vmnet8
# Allow PORT/EPRT FTP commands (they need incoming TCP stream...)
activeFTP = 1
# Allows the source to have any OUI. Turn this one if you change the OUI
# in the MAC address of your virtual machines.
#allowAnyOUI = 1
[udp]
# Timeout in seconds, 0 = no timeout, default = 30; real value might
# be up to 100% longer
timeout = 30
[dns]
# This section applies only to Windows.
#
# Policy to use for DNS forwarding. Accepted values include order,
# rotate, burst.
#
# order: send one DNS request at a time in order of the name servers
# rotate: send one DNS request at a time, rotate through the DNS servers
# burst: send to three servers and wait for the first one to respond
policy = order
# Timeout in seconds before retrying DNS request.
timeout = 2
# Retries before giving up on DNS request
retries = 3
# Automatically detect the DNS servers (not supported in Windows NT)
autodetect = 1
# List of DNS servers to use. Up to three may be specified
#nameserver1 = 198.41.0.4
#nameserver2 = 192.36.148.17
#nameserver3 = 202.12.27.33
[netbios]
# This section applies only to Windows.
# Timeout for NBNS queries.
nbnsTimeout = 2
# Number of retries for each NBNS query.
nbnsRetries = 3
# Timeout for NBDS queries.
nbdsTimeout = 3
[incomingtcp]
# Use these with care - anyone can enter into your virtual machine through these...
# FTP (both active and passive FTP is always enabled)
# ftp localhost 8887
#8887 = 192.168.27.128:21
# WEB (make sure that if you are using named webhosting, names point to
# your host, not to guest... And if you are forwarding port other
# than 80 make sure that your server copes with mismatched port
# number in Host: header)
# lynx
http://localhost:8888
#8888 = 192.168.27.128:80
# SSH
# ssh -p 8889 root@localhost
#8889 = 192.168.27.128:22
[incomingudp]
# UDP port forwarding example
#6000 = 192.168.27.128:6001
[PrivilegedTCP]
autodetect = 1
[PrivilegedUDP]
autodetect = 1
Und die SUSE Linux.vmx:
config.version = "8"
virtualHW.version = "4"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "512"
MemAllowAutoScaleDown = "FALSE"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "SUSE Linux-000001.vmdk"
ide1:0.present = "TRUE"
ide1:0.fileName = "D:"
ide1:0.deviceType = "cdrom-raw"
floppy0.present = "FALSE"
ethernet0.present = "TRUE"
ethernet0.connectionType = "nat"
usb.present = "TRUE"
sound.present = "TRUE"
sound.virtualDev = "es1371"
sound.fileName = "-1"
sound.autodetect = "TRUE"
displayName = "SUSE Linux 10.1 RC3"
guestOS = "suse"
nvram = "SUSE Linux.nvram"
ide1:0.autodetect = "FALSE"
scsi0:0.redo = ""
ethernet0.addressType = "generated"
uuid.location = "56 4d 39 18 87 e7 63 d7-80 d0 03 ff ff bb 3c a3"
uuid.bios = "56 4d 57 08 a0 bb 63 c8-24 e3 ce 6d 7d 72 09 bf"
ethernet0.generatedAddress = "00:0c:29:72:09:bf"
ethernet0.generatedAddressOffset = "0"
ide1:0.startConnected = "TRUE"
tools.syncTime = "FALSE"
workingDir = "."
sharedFolder.maxNum = "1"
sharedFolder0.present = "TRUE"
sharedFolder0.enabled = "TRUE"
sharedFolder0.readAccess = "TRUE"
sharedFolder0.writeAccess = "TRUE"
sharedFolder0.hostPath = "Z:\"
sharedFolder0.guestName = "Z"
sharedFolder0.expiration = "never"
checkpoint.vmState.readOnly = "FALSE"
checkpoint.vmState = ""
Danke!
LG
Joe
