Host: Kanotix, Guest: W2k, Probs mit Parallelport

[malo]

Hallo,

ich habe unter Kanotix 4-2005 als Guest W2K mit Servicepack 4 laufen. Leider bekomme ich unter W2k den Parallelport nicht zum laufen.
Folgendes habe ich bereits gemacht: Unter "Edit virtual device setting" habe ich den Parport hinzugefügt. Hier funmktioniert bereits "Auto-detect" nicht. Wenn ich den Device manuell eingebe, auf dem Host als /dev/lp0 deklariert, gibt es beim Start des Guestsystems eine Fehlermeldung nach der Art:

"Can not open Parallelport /dev/lp0, no such File or directory"

Dann wird W2k ohne Parport geöffnet. Unter Linux funktioniert der Drucker.

Was mache ich falsch?

Viele GRüße Malo

[minimike]

Dumme Frage aber Rechte OK?

ls -l /dev/lp0

[malo]

Dumme Frage aber Rechte OK?

ls -l /dev/lp0

Habe ich erstmal für alle verfügbar gemacht. Jetzt erhalte ich die Meldung:

Code: Alles auswählen

parallel0: We have detected an LP style device. This type of device has been deprecated in VMware Workstation. We have guessed that "/dev/parport0" corresponds to "/dev/lp0" and will use that instead. To turn off this message, modify the device used for the parallel port.

Anschließend kommt die Meldung:

Code: Alles auswählen

Cannot open /dev/parport0: No such file or directory
Virtual device parallel0 will start disconnected

Hat noch jemand Ideen was hier falsch läuft?

Viele Grüße Malo

[stefan.becker]

Wenn der Drucker unter Linux geht, ist drucken über Samba die bessere Alternative. Der lpt-Direktkram ist immer problematisch.

[malo]

Das Problem ist ja nicht unbedingt der Drucker . da benutze ich einen mit USB. Ich habe aber noch einen alten Scanner mit Parport, den ich gerne nutzen würde. Geht das auch über Samba?

Viele Grüße Malo

[stefan.becker]

Grundsätzlich wäre ein Neukauf sinnvoller, wenn der Scanner unter Linux nicht geht.

Trotzdem:

Poste mal die /etc/modules.conf bzw. modprobe.conf.

Ist denn der Paralleport-Support im Kernel eingebaut?

Ist im Bios ECP//EPP eingestellt?


Wenn der Scanner unter Linux ginge, wäre ein Netzwerk-Lösung denkbar. Dazu ist im Sane-Paket der saned-Demon enthalten. Siehe auch:

http://www.linuxforen.de/forums/showpos ... stcount=11

[malo]

Grundsätzlich wäre ein Neukauf sinnvoller, wenn der Scanner unter Linux nicht geht.

Das würde sich wieder nicht lohnen, weil so oft brauche ich den Scanner nicht

Trotzdem:

Poste mal die /etc/modules.conf bzw. modprobe.conf.

modprobe.conf habe ich nicht nur modeprobe.devfs

Code: Alles auswählen

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module, up to kernel 2.4.17, does not load the tuner
# module automatically, so do that in here
if KERNEL_VER < 2.4.17
    post-install bttv insmod tuner
    post-remove bttv rmmod tuner
endif


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off      # Unix
# alias net-pf-2 off      # IPv4
# alias net-pf-3 off      # Amateur Radio AX.25
# alias net-pf-4 off      # IPX
# alias net-pf-5 off      # DDP / appletalk
# alias net-pf-6 off      # Amateur Radio NET/ROM
# alias net-pf-9 off      # X.25
# alias net-pf-10 off      # IPv6
# alias net-pf-11 off      # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off      # Acorn Econet
# alias net-pf-20 off      # ATM
# alias net-pf-23 off      # IRDA
# alias net-pf-24 off      # PPPoE
# alias net-pf-25 off      # WANrouter
# alias net-pf-26 off      # Llc
# alias net-pf-31 off      # Bluetooth

alias binfmt-204   binfmt_aout
alias binfmt-263   binfmt_aout
alias binfmt-264   binfmt_aout
alias binfmt-267   binfmt_aout
alias binfmt-387   binfmt_aout

alias bt-proto-0   l2cap
alias bt-proto-2   sco
alias bt-proto-3   rfcomm
alias bt-proto-4   bnep
alias bt-proto-5   cmtp
alias bt-proto-6   hidp
alias bt-proto-7   avdtp

alias char-major-9   st
alias char-major-10-1   psmouse
alias char-major-10-134   apm
alias char-major-10-135   rtc
alias char-major-10-139   openprom
alias char-major-10-144   nvram
alias char-major-10-157   applicom
alias char-major-10-175   agpgart
alias char-major-10-181   toshiba
alias char-major-10-183   hw_random
alias char-major-10-184   microcode
alias char-major-10-187   irnet
alias char-major-10-189   ussp
alias char-major-10-200   tun
alias char-major-10-250   hci_vhci
alias char-major-13    input
alias char-major-13-0    joydev
alias char-major-13-1    joydev
alias char-major-13-2    joydev
alias char-major-13-3   joydev
alias char-major-13-32   mousedev
alias char-major-13-33   mousedev
alias char-major-13-34   mousedev
alias char-major-13-35   mousedev
alias char-major-13-63   mousedev
alias char-major-13-64   evdev
alias char-major-13-65   evdev
alias char-major-13-66   evdev
alias char-major-13-67   evdev
alias char-major-19   cyclades
alias char-major-20   cyclades
alias char-major-21   sg
alias char-major-22   pcxx
alias char-major-23   pcxx
alias char-major-27   ftape
alias char-major-27   zftape
alias char-major-34   scc
alias char-major-35   tclmidi
alias char-major-37   ide-tape
alias char-major-48   riscom8
alias char-major-49   riscom8
alias char-major-57   esp
alias char-major-58   esp
alias char-major-63   kdebug
alias char-major-67   coda
alias char-major-75   specialix
alias char-major-76   specialix
alias char-major-81   bttv
alias char-major-81   videodev
alias char-major-83   vtx
alias char-major-89   i2c-dev
alias char-major-90   mtdchar
alias char-major-96   pt
alias char-major-97   pg
alias char-major-99   ppdev
alias char-major-107   3dfx
alias char-major-109   lvm-mod
alias char-major-108   ppp_generic
alias char-major-116   snd
alias char-major-161   ircomm-tty
alias char-major-162   raw
alias char-major-166   cdc_acm
alias char-major-171   raw1394
alias char-major-180-48   scanner
alias char-major-180   usbcore
alias char-major-195   nvidia
alias char-major-200   vxspec
alias char-major-202   msr
alias char-major-203   cpuid
alias char-major-206   osst
alias char-major-208   ussp
alias char-major-227   tub3270
alias /dev/ppp      ppp_generic
alias tty-ldisc-3   ppp_async
alias tty-ldisc-14   ppp_synctty
alias ppp-compress-18   ppp_mppe
alias ppp-compress-21   bsd_comp
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate

alias dummy0      dummy
alias dummy1      dummy
alias gre0      ip_gre
alias iso9660      isofs
alias plip0      plip
alias plip1      plip
alias slip0      slip
alias slip1      slip
alias tunl0      ipip
alias usbdevfs      usbcore
alias cipcb0      cipcb
alias cipcb1      cipcb
alias cipcb2      cipcb
alias cipcb3      cipcb

# IPSEC
alias xfrm-type-2-50   esp4
alias xfrm-type-2-51   ah4
alias xfrm-type-2-108   ipcomp
alias xfrm-type-10-50   esp6
alias xfrm-type-10-51   ah6
alias xfrm-type-10-108   ipcomp6


# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0   loop_gen
alias loop-xfer-3   loop_fish2
alias loop-xfer-gen-10   loop_gen
alias cipher-2      des
alias cipher-3      fish2
alias cipher-4      blowfish
alias cipher-6      idea
alias cipher-7      serp6f
alias cipher-8      mars6
alias cipher-11      rc62
alias cipher-15      dfc2
alias cipher-16      rijndael
alias cipher-17      rc5

# IDE modules changed names in 2.4.22
if KERNEL_VER >= 2.4.22
   alias ide-mod ide-core
   alias ide-probe-mod ide-detect
endif

alias net-pf-17 af_packet
alias ide_cs ide-cs
alias usbcore off
alias autofs autofs4

### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/apm
alias char-major-10-134   apm
alias /dev/apm_bios      /dev/misc/apm_bios
alias /dev/misc/apm_bios   apm
options apm power_off=1

### update-modules: end processing /etc/modutils/apm

### update-modules: start processing /etc/modutils/autofs
alias autofs   autofs4

### update-modules: end processing /etc/modutils/autofs

### update-modules: start processing /etc/modutils/bluez
# BlueZ modules
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias bt-proto-5 cmtp
alias bt-proto-6 hidp
alias tty-ldisc-15 hci_uart
alias char-major-10-250 hci_vhci

### update-modules: end processing /etc/modutils/bluez

### update-modules: start processing /etc/modutils/dvb
probeall /dev/dvb dvb-ttpci
alias char-major-250 dvb
alias dvb dvb-ttpci
below dvb-ttpci ves1x93 alps_tdmb7 alps_tdlb7
add below dvb-ttpci grundig_29504-401 grundig_29504-491
add below dvb-ttpci stv0299 ves1820


### update-modules: end processing /etc/modutils/dvb

### update-modules: start processing /etc/modutils/ipx.aliases
alias net-pf-4 ipx

### update-modules: end processing /etc/modutils/ipx.aliases

### update-modules: start processing /etc/modutils/irda-utils
alias tty-ldisc-11 irtty
alias char-major-161 ircomm-tty
alias char-major-60 ircomm_tty

# For dongles
alias irda-dongle-0 tekram
alias irda-dongle-1 esi
alias irda-dongle-2 actisys
alias irda-dongle-3 actisys
alias irda-dongle-4 girbil
alias irda-dongle-5 litelink
alias irda-dongle-6 airport
alias irda-dongle-7 old_belkin

# For FIR device

#options 
#alias irda0

### update-modules: end processing /etc/modutils/irda-utils

### update-modules: start processing /etc/modutils/linux-sound-base_noOSS
alias ac97 off
alias ac97_codec off
alias ac97_plugin_ad1980 off
alias ad1848 off
alias ad1889 off
alias adlib_card off
alias aedsp16 off
alias ali5455 off
alias btaudio off
alias cmpci off
alias cs4232 off
alias cs4281 off
alias cs461x off
alias cs46xx off
alias emu10k1 off
alias es1370 off
alias es1371 off
alias esssolo1 off
alias forte off
alias gus off
alias i810_audio off
alias kahlua off
alias mad16 off
alias maestro off
alias maestro3 off
alias maui off
alias mpu401 off
alias nm256_audio off
alias opl3 off
alias opl3sa off
alias opl3sa2 off
alias pas2 off
alias pss off
alias rme96xx off
alias sb off
alias sb_lib off
alias sgalaxy off
alias sonicvibes off
alias sound off
alias sscape off
alias trident off
alias trix off
alias uart401 off
alias uart6850 off
alias via82cxxx_audio off
alias v_midi off
alias wavefront off
alias ymfpci off
alias ac97_plugin_wm97xx off
alias ad1816 off
alias audio off
alias awe_wave off
alias dmasound_core off
alias dmasound_pmac off
alias harmony off
alias sequencer off
alias soundcard off
alias usb-midi off

### update-modules: end processing /etc/modutils/linux-sound-base_noOSS

### update-modules: start processing /etc/modutils/linux-wlan-ng
# Aliases to tell insmod/modprobe which module to use when bringing up the
# wlan0 interface.

# Uncomment the line corresponding to the type of prism2 device you have.
#alias wlan0 prism2_pci
alias wlan0 prism2_usb
#alias wlan0 prism2_cs
#alias wlan0 prism2_plx


### update-modules: end processing /etc/modutils/linux-wlan-ng

### update-modules: start processing /etc/modutils/lvm-common
# The Logical Volume Manager uses these block and char numbers
alias block-major-58 lvm-mod
alias char-major-109 lvm-mod

### update-modules: end processing /etc/modutils/lvm-common

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the ones that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/raidtools2
alias md-personality-1 linear
alias md-personality-2 raid0
alias md-personality-3 raid1
alias md-personality-4 raid5

### update-modules: end processing /etc/modutils/raidtools2

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
#
alias /dev/tts          serial
alias /dev/tts/0        serial
alias /dev/tts/1        serial
alias /dev/tts/2        serial
alias /dev/tts/3        serial
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave  > /dev/null 2> /dev/null

### update-modules: end processing /etc/modutils/setserial

### update-modules: start processing /etc/modutils/sl-modem-daemon.modutils
alias char-major-243 slusb
alias char-major-242 slamr


### update-modules: end processing /etc/modutils/sl-modem-daemon.modutils

### update-modules: start processing /etc/modutils/udftools
alias /dev/pktcdvd* pktcdvd
alias block-major-97 pktcdvd

### update-modules: end processing /etc/modutils/udftools

### update-modules: start processing /etc/modutils/usbfix
# If both mousedev and usbmouse are insmodded, neither of them works right.
# Adding solution proposed by Kai Lehmann:
alias usbmouse mousedev
# Same for USB keyboards, which should be used in hid generic mode instead
alias usbkbd hid

### update-modules: end processing /etc/modutils/usbfix

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386

Ist denn der Paralleport-Support im Kernel eingebaut?

würde ich doch sagen, da der Parportdrucker unter Linux funktioniert

Ist im Bios ECP//EPP eingestellt?

habe ich noch nicht nachgeschaut

Ich habe schon so viel mit Sane rumprobiert, hin und wieder wurde auch was erkannt, aber funktioniert hat er nie. Dazu muß ich sagen, dass ich auch noch nicht so gut im Umgang mit der Konsole und Linux bin.

Viele Grüße malo