ich habe hier eine 4TB USB3 Festplatte von WD. Diese enthält eine EXT4 Partition.
Auf diese möchte ich Sicherungen meiner VM schreiben. Dazu habe ich zunächst den usb arbitrator gestoppt:
/etc/init.d/usbarbitrator stop
Dann die Platte angesteckt. dmesg sagt:
Code: Alles auswählen
2016-12-03T16:15:21.307Z cpu3:35472)<6>xhci_hcd 0000:00:14.0: Port Status Change Event for port 22
2016-12-03T16:15:21.307Z cpu3:35472)<6>xhci_hcd 0000:00:14.0: resume root hub
2016-12-03T16:15:21.307Z cpu3:35472)<6>xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
2016-12-03T16:15:21.329Z cpu1:33082)<6>usb usb2: resumed
2016-12-03T16:15:21.329Z cpu1:33082)<6>xhci_hcd 0000:00:14.0: clear port connect change, actual port 5 status = 0x1203
2016-12-03T16:15:21.399Z cpu0:33074)<6>xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
2016-12-03T16:15:21.441Z cpu1:33082)<6>usb usb2: resumed
2016-12-03T16:15:21.441Z cpu0:33114)<6>hub 2-0:1.0: resumed
2016-12-03T16:15:21.441Z cpu0:33114)<6>xhci_hcd 0000:00:14.0: Slot 7 output ctx = 0x844b6000 (dma)
2016-12-03T16:15:21.441Z cpu0:33114)<6>xhci_hcd 0000:00:14.0: Slot 7 input ctx = 0x844b8000 (dma)
2016-12-03T16:15:21.441Z cpu0:33114)<6>xhci_hcd 0000:00:14.0: Set slot id 7 dcbaa entry 0x4302cf5fa038 to 0x844b6000
2016-12-03T16:15:21.441Z cpu0:33114)<6>xhci_hcd 0000:00:14.0: set port reset, actual port 5 status = 0x1311
2016-12-03T16:15:21.441Z cpu3:33013)<6>xhci_hcd 0000:00:14.0: Port Status Change Event for port 22
2016-12-03T16:15:21.441Z cpu3:33013)<6>xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
2016-12-03T16:15:21.563Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: clear port reset change, actual port 5 status = 0x1203
2016-12-03T16:15:21.563Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: Set root hub portnum to 22
2016-12-03T16:15:21.563Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: Set fake root hub portnum to 6
2016-12-03T16:15:21.563Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: udev->tt = 0x0
2016-12-03T16:15:21.563Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: udev->ttport = 0x0
2016-12-03T16:15:21.563Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: Slot ID 7 Input Context:
2016-12-03T16:15:21.564Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: Slot ID 7 Input Context:
2016-12-03T16:15:21.564Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: Slot ID 7 Output Context:
2016-12-03T16:15:21.564Z cpu1:33114)<6>usb 2-6: new SuperSpeed USB device number 3 using xhci_hcd
2016-12-03T16:15:21.586Z cpu3:35472)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event
2016-12-03T16:15:21.586Z cpu3:33013)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event
2016-12-03T16:15:21.586Z cpu3:33013)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event
2016-12-03T16:15:21.586Z cpu3:33013)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event
2016-12-03T16:15:21.586Z cpu1:33114)<6>usb 2-6: New USB device found, idVendor=1058, idProduct=107c
2016-12-03T16:15:21.586Z cpu1:33114)<6>usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
2016-12-03T16:15:21.586Z cpu1:33114)<6>usb 2-6: Product: Elements 107C
2016-12-03T16:15:21.586Z cpu1:33114)<6>usb 2-6: Manufacturer: Western Digital
2016-12-03T16:15:21.586Z cpu1:33114)<6>usb 2-6: SerialNumber: XXXXXXXXXXXXXXXXXXXXXXX
2016-12-03T16:15:21.586Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: add ep 0x81, slot id 7, new drop flags = 0x0, new add flags = 0x8
2016-12-03T16:15:21.586Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: add ep 0x2, slot id 7, new drop flags = 0x0, new add flags = 0x18
2016-12-03T16:15:21.586Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0x4302e3320b00
2016-12-03T16:15:21.586Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: New Input Control Context:
2016-12-03T16:15:21.586Z cpu1:33114)<6>xhci_hcd 0000:00:14.0: Output context after successful config ep cmd:
2016-12-03T16:15:21.586Z cpu1:33114)<6>usb 2-6: Vendor: 0x1058, Product: 0x107c, Revision: 0x1065
2016-12-03T16:15:21.586Z cpu1:33114)<6>usb 2-6: Interface Subclass: 0x06, Protocol: 0x50
2016-12-03T16:15:21.586Z cpu1:33114)WARNING: LinScsiLLD: scsi_add_host:573: vmkAdapter (usb-storage) sgMaxEntries rounded to 255. Reported size was 65535
2016-12-03T16:15:21.587Z cpu1:33114)LinPCI: LinuxPCI_DeviceIsPAECapable:581: PAE capable device at 0000:00:14.0
2016-12-03T16:15:21.587Z cpu1:33114)DMA: 646: DMA Engine 'vmhba38' created using mapper 'DMANull'.
2016-12-03T16:15:21.587Z cpu1:33114)<6>usb-storage 2-6:1.0: interface is claimed by usb-storage
2016-12-03T16:15:21.587Z cpu1:33114)<6>usb 2-6: device is not available for passthrough
2016-12-03T16:15:21.587Z cpu1:33114)<6>usb 2-6: usbfs: registered usb0203
2016-12-03T16:15:21.587Z cpu1:33114)<6>hub 2-0:1.0: suspended
2016-12-03T16:15:21.597Z cpu3:32811)ScsiNpiv: 1505: GetInfo for adapter vmhba38, [0x4301b14f3fc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, sts=bad0020
2016-12-03T16:15:21.643Z cpu0:33074)<6>xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
2016-12-03T16:15:22.588Z cpu0:35659)usb-storage: detected SCSI revision number 6 on vmhba38
2016-12-03T16:15:22.588Z cpu0:35659)usb-storage: patching inquiry data to change SCSI revision number from 6 to 2 on vmhba38
2016-12-03T16:15:22.588Z cpu0:35659)usb-storage: patching inquiry data to change removable media bit from 'off' to 'on' on vmhba38
2016-12-03T16:15:22.588Z cpu3:33086)ScsiScan: 1173: Path 'vmhba38:C0:T0:L0': Vendor: 'WD ' Model: 'Elements 107C ' Rev: '1065'
2016-12-03T16:15:22.588Z cpu3:33086)ScsiScan: 1176: Path 'vmhba38:C0:T0:L0': Type: 0x0, ANSI rev: 2, TPGS: 0 (none)
2016-12-03T16:15:22.588Z cpu3:33086)ScsiUid: 273: Path 'vmhba38:C0:T0:L0' does not support VPD Device Id page.
2016-12-03T16:15:22.588Z cpu3:33086)ScsiScan: 1311: Path 'vmhba38:C0:T0:L0' : No standard UID: Failure. ANSI version 'SCSI-2' (0x2).
2016-12-03T16:15:22.588Z cpu3:33086)VMWARE SCSI Id: Could not get disk id for vmhba38:C0:T0:L0
2016-12-03T16:15:22.588Z cpu3:33086)ScsiScan: 1738: Add path: vmhba38:C0:T0:L0
2016-12-03T16:15:22.588Z cpu3:33086)ScsiPath: 5549: Plugin 'NMP' claimed path 'vmhba38:C0:T0:L0'
2016-12-03T16:15:30.856Z cpu0:35659)usb-storage: detected SCSI revision number 6 on vmhba38
2016-12-03T16:15:30.856Z cpu0:35659)usb-storage: patching inquiry data to change SCSI revision number from 6 to 2 on vmhba38
2016-12-03T16:15:30.856Z cpu0:35659)usb-storage: patching inquiry data to change removable media bit from 'off' to 'on' on vmhba38
2016-12-03T16:15:30.856Z cpu1:33086)ScsiUid: 273: Path 'vmhba38:C0:T0:L0' does not support VPD Device Id page.
2016-12-03T16:15:30.856Z cpu1:33086)VMWARE SCSI Id: Could not get disk id for vmhba38:C0:T0:L0
2016-12-03T16:15:30.856Z cpu1:33086)vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: Changing active path from NONE to vmhba38:C0:T0:L0 for device "Unregistered Device".
2016-12-03T16:15:30.856Z cpu1:33086)StorageApdHandler: 982: APD Handle Created with lock[StorageApd-0x4301b1542290]
2016-12-03T16:15:30.856Z cpu1:33086)ScsiEvents: 501: Event Subsystem: Device Events, Created!
2016-12-03T16:15:30.856Z cpu3:33086)VMWARE SCSI Id: Could not get disk id for vmhba38:C0:T0:L0
2016-12-03T16:15:30.856Z cpu3:33086)ScsiDeviceIO: 8362: Get VPD 80 Inquiry for device "mpx.vmhba38:C0:T0:L0" from Plugin "NMP" failed. Not supported
2016-12-03T16:15:30.856Z cpu3:33086)ScsiDeviceIO: 8372: Get VPD 83 Inquiry for device "mpx.vmhba38:C0:T0:L0" from Plugin "NMP" failed. Not supported
2016-12-03T16:15:30.856Z cpu3:33086)ScsiDeviceIO: 8409: Get VPD 86 Inquiry for device "mpx.vmhba38:C0:T0:L0" from Plugin "NMP" failed. Not supported
2016-12-03T16:15:30.856Z cpu3:33086)ScsiDeviceIO: 7047: QErr is correctly set to 0x0 for device mpx.vmhba38:C0:T0:L0.
2016-12-03T16:15:30.856Z cpu3:32790)NMP: nmp_ThrottleLogForDevice:3298: Cmd 0x1a (0x439d803ed7c0, 0) to dev "mpx.vmhba38:C0:T0:L0" on path "vmhba38:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. Act:NONE
2016-12-03T16:15:30.856Z cpu3:32790)ScsiDeviceIO: 2635: Cmd(0x439d803ed7c0) 0x1a, CmdSN 0x87c from world 0 to dev "mpx.vmhba38:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
2016-12-03T16:15:30.857Z cpu3:33086)ScsiDeviceIO: 7544: Could not detect setting of sitpua for device mpx.vmhba38:C0:T0:L0. Error Not supported.
2016-12-03T16:15:30.857Z cpu3:32790)NMP: nmp_ThrottleLogForDevice:3298: Cmd 0x9e (0x439d803ed7c0, 0) to dev "mpx.vmhba38:C0:T0:L0" on path "vmhba38:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0. Act:NONE
2016-12-03T16:15:30.939Z cpu3:33086)WARNING: ScsiDeviceIO: 8716: Mode Sense cmd reported block size 4096, does not match the current block size 512 for device mpx.vmhba38:C0:T0:L0. The device is marked format corrupt.
2016-12-03T16:15:30.939Z cpu3:32790)NMP: nmp_ThrottleLogForDevice:3298: Cmd 0x12 (0x439d803ed7c0, 0) to dev "mpx.vmhba38:C0:T0:L0" on path "vmhba38:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. Act:NONE
2016-12-03T16:15:30.940Z cpu3:35659)usb-storage: detected SCSI revision number 6 on vmhba38
2016-12-03T16:15:30.940Z cpu3:35659)usb-storage: patching inquiry data to change SCSI revision number from 6 to 2 on vmhba38
2016-12-03T16:15:30.940Z cpu3:35659)usb-storage: patching inquiry data to change removable media bit from 'off' to 'on' on vmhba38
2016-12-03T16:15:30.940Z cpu3:33086)ScsiEvents: 300: EventSubsystem: Device Events, Event Mask: 40, Parameter: 0x4301b154cfc0, Registered!
2016-12-03T16:15:30.940Z cpu3:33086)ScsiDevice: 3835: Successfully registered device "mpx.vmhba38:C0:T0:L0" from plugin "NMP" of type 0
2016-12-03T16:15:30.940Z cpu3:33086)ScsiEvents: 300: EventSubsystem: Device Events, Event Mask: 180, Parameter: 0x4302db3b5d30, Registered!
2016-12-03T16:15:30.940Z cpu3:33086)<6>usb-storage 2-6:1.0: suspendedDie Platte wird nicht erkannt. Was läuft hier schief?
VG
mode
