Das Forum wurde aktualisiert. Wurde höchste Zeit. Wenn etwas nicht funktioniert, bitte gerne hier jederzeit melden.
(Das "alte Design" kommt wieder, wird ne Weile brauchen!)

VMware-player-2.5.3 - Einstellungen?

Hilfe bei Problemen mit der Installation und Benutzung des VMware Player.

Moderatoren: irix, stefan.becker, continuum, Dayworker, Tschoergez

Member
Beiträge: 149
Registriert: 06.06.2006, 08:12

VMware-player-2.5.3 - Einstellungen?

Beitragvon ManfredB » 21.10.2009, 15:04

Hallo zusammen.

Hier einige Informationen:

Host: Gentoo mit KDE 4.3.2 - vmware-player-2.5.3
Gast: Gentoo - soll installiert werden.

Mein Rechner: Intel Pentium D 820, Geforce 6600 GT 256 MB, 2048 MB RAM DDR2, Samsung SATA II 400 GB, Mainboard Asus P5B-Deluxe

Ich vergebe für Host: 1024 MB RAM, dasselbe für Gast.
In der vmware-player-Konfiguration habe ich nur eine CPU eingetragen,
trage ich 2 ein, wird alles schneckenlangsam.

Nun passiert beim Compilieren einiger grösserer Programme wie zB
kdelibs-4.3.2, dass der Player regelrecht "einfriert" - CPU-Belastung
100 %

Zwar steigt diese CPU-Belastung immer wieder auf 100, aber nicht immer kommt dieses Einfrieren.

Glücklicherweise kann ich per suspend und quit den Prozess unterbrechen.

Nach Neustart des Players geht es dann an der Stelle weiter, wo zuvor die Unterbrechung war.

Kann ich das Einfrieren irgendwie durch Änderung der Einstellungen
abstellen?

Oder ist mein Rechner denn doch nicht stark genug, um solche umfangreichen Compilierungen klaglos hinzunehmen.

Ausserhalb des Players, also wenn ich Gentoo normal auf HD installiere, kommen solche Aussetzer natürlich nicht vor.

Danke im voraus für Hinweise, Tipps o.ä.

Gruss
Manfred

Benutzeravatar
Moderator
Beiträge: 14663
Registriert: 09.08.2003, 05:41
Wohnort: sauerland
Kontaktdaten:

Beitragvon continuum » 21.10.2009, 15:28

Ich vergebe für Host: 1024 MB RAM, dasselbe für Gast.


wie machst du das denn ???

poste mal ein vmware.log wo das Problem aufgetreten ist

Member
Beiträge: 149
Registriert: 06.06.2006, 08:12

Beitragvon ManfredB » 21.10.2009, 16:13

Wie mache ich es, dass ich bereits im vmware-player die Installation beginnen kann:

1. vmmanager (eigentlich für Windows, läuft aber auch unter wine.

2. Mit diesem erstelle ich mir offline (andernfalls eben easyvmx)
eine vmx-Datei, in der die RAM-Einstellung festgelegt ist.

3. Diese erstellte vmx-Datei vom vmmanager muss ich nur insofern ändern, als zB die eingebundene iso-Datei nach Windows-Manier
in einem Verzeichnis liegend dargestellt wird, also zB Laufwerk\Verz\iso.

Ansonsten kann die vmx-Datei dann einfach mit dem Player starten und die Installation zB von Gentoo beginnen.

In den log-Dateien sehe ich nur haufenweise den Befehle
DUMPER.

Ich werde eine dieser log-Dateien anhängen, wenn der Player beendet ist, was noch einige Zeit dauern wird.

Gruss
Manfred

Benutzeravatar
King of the Hill
Beiträge: 12065
Registriert: 01.10.2008, 12:54
Wohnort: laut USV-Log am Ende der Welt...

Beitragvon Dayworker » 21.10.2009, 17:21

1. vmmanager (eigentlich für Windows, läuft aber auch unter wine.
Wozu "wine" einsetzen, den VMware-Player gibt es auch als Linux-Version.
Anhänge gehen hier nicht, verlinke stattdessen das vmware.log aus dem betreffenden VM-Verzeichnis oder poste einfach den Inhalt ins Forum. ;)

Benutzeravatar
Moderator
Beiträge: 14663
Registriert: 09.08.2003, 05:41
Wohnort: sauerland
Kontaktdaten:

Beitragvon continuum » 21.10.2009, 19:52

wine nimmt er fuer vmmanager - hier wuerde ich allerdings den vmx-builder klar vorziehen

Benutzeravatar
King of the Hill
Beiträge: 12065
Registriert: 01.10.2008, 12:54
Wohnort: laut USV-Log am Ende der Welt...

Beitragvon Dayworker » 21.10.2009, 21:53

Okay und wieder was dazu gelernt.
Ausgehend von seinem Eröffnungsposting würd ich sagen, daß ein Pentium-D 820 und 1GB VM-Arbeitsspeicher nicht unbedingt die besten Voraussetzungen zum Kompilieren umfangreicher Bibliotheken sind. Die wahrscheinlich schon länger am Markt befindliche, wenn auch leise, 400GB-Sata2-Platte wird auch keine Wunder vollbringen. Aber alles ist eine Frage der persönlichen Möglichkeiten und der verfügbaren Zeit. Da wird die weitestmögliche Optimierung der VMX zur Notwendigkeit um auch das kleinste Quentchen CPU-Leistung in die VM zu bringen.
Ich bin mal gespannt, was VMX oder vmware.log hergeben.

Member
Beiträge: 149
Registriert: 06.06.2006, 08:12

Beitragvon ManfredB » 22.10.2009, 05:16

Hier also die letzte log-Datei:

Code: Alles auswählen

Oct 21 18:58:13.174: vmx| Log for VMware Player pid=22885 version=2.5.3 build=build-185404 option=Release
Oct 21 18:58:13.174: vmx| Host codepage=UTF-8 encoding=UTF-8
Oct 21 18:58:13.174: vmx| Hostname=localhost
Oct 21 18:58:13.174: vmx| IP=127.0.0.1 (lo)
Oct 21 18:58:13.174: vmx| IP=192.168.0.100 (eth0)
Oct 21 18:58:13.174: vmx| IP=192.168.109.129 (vmnet1)
Oct 21 18:58:13.174: vmx| IP=172.16.46.129 (vmnet8)
Oct 21 18:58:13.174: vmx| Command line: "/opt/vmware/player/lib/vmware/bin/vmware-vmx" "-#" "product=8;name=VMware Player;version=2.5.3;buildnumber=185404;licensename=VMware Player;licenseversion=6.0 build-185404;" "-@" "pipe=/tmp/vmware-manbla/vmxe0666b004b59ecd1;readyEvent=142" "/Linux/Daten/VMware/Gentoo10/Gentoo10.vmx"
Oct 21 18:58:13.174: vmx| Msg_SetLocale: HostLocale=UTF-8 UserLocale=NULL
Oct 21 18:58:13.175: vmx| Ready event: 142
Oct 21 18:58:13.267: vmx| UI Connecting to pipe '/tmp/vmware-manbla/vmxe0666b004b59ecd1' with user '(null)'
Oct 21 18:58:13.309: vmx| Setup symlink /var/run/vmware/6e45e6bffe44b8c7ce2804088250cd2b -> /var/run/vmware/manbla_1000/1256144293174855_22885
Oct 21 18:58:13.309: vmx| Sig_Init already initialized
Oct 21 18:58:13.311: vmx| Transitioned vmx/execState/val to poweredOff
Oct 21 18:58:13.312: vmx| VMMon_GetkHzEstimate: Calculated 2808671 kHz
Oct 21 18:58:13.313: vmx| CPU kHz estimates: vmmon 2808671, cpuinfo 2808672, cpufreq 0. Using 2808671 kHz
Oct 21 18:58:13.313: vmx| CPU # 0 TSC = 47707204942558
Oct 21 18:58:13.313: vmx| CPU # 1 TSC = 47707204942684
Oct 21 18:58:13.313: vmx| TSC delta 126
Oct 21 18:58:13.313: vmx| PTSC: RefClockToTSC 1000000Hz -> 2808671000Hz
Oct 21 18:58:13.313: vmx| PTSC: RefClockToTSC ((x * 2945105002) >> 20)
Oct 21 18:58:13.313: vmx| PTSC: using TSC
Oct 21 18:58:13.314: vmx| CPUID[0] vendor: GenuntelineI
Oct 21 18:58:13.314: vmx| CPUID[0]   name:               Intel(R) Pentium(R) D CPU 2.80GHz
Oct 21 18:58:13.314: vmx| CPUID[0] level 00000000, 0: 0x00000005 0x756e6547 0x6c65746e 0x49656e69
Oct 21 18:58:13.314: vmx| CPUID[0] level 00000001, 0: 0x00000f47 0x00020800 0x0000641d 0xbfebfbff
Oct 21 18:58:13.314: vmx| CPUID[0] level 00000002, 0: 0x605b5101 0x00000000 0x00000000 0x007c7040
Oct 21 18:58:13.314: vmx| CPUID[0] level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[0] level 00000004, 0: 0x04000121 0x01c0003f 0x0000001f 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[0] level 00000005, 0: 0x00000040 0x00000040 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20100000
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000002, 0: 0x20202020 0x20202020 0x20202020 0x6e492020
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000003, 0: 0x286c6574 0x50202952 0x69746e65 0x52286d75
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000004, 0: 0x20442029 0x20555043 0x30382e32 0x007a4847
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000006, 0: 0x00000000 0x00000000 0x04006040 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[0] level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[1] vendor: GenuntelineI
Oct 21 18:58:13.314: vmx| CPUID[1]   name:               Intel(R) Pentium(R) D CPU 2.80GHz
Oct 21 18:58:13.314: vmx| CPUID[1] level 00000000, 0: 0x00000005 0x756e6547 0x6c65746e 0x49656e69
Oct 21 18:58:13.314: vmx| CPUID[1] level 00000001, 0: 0x00000f47 0x01020800 0x0000641d 0xbfebfbff
Oct 21 18:58:13.314: vmx| CPUID[1] level 00000002, 0: 0x605b5101 0x00000000 0x00000000 0x007c7040
Oct 21 18:58:13.314: vmx| CPUID[1] level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[1] level 00000004, 0: 0x04000121 0x01c0003f 0x0000001f 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[1] level 00000005, 0: 0x00000040 0x00000040 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20100000
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000002, 0: 0x20202020 0x20202020 0x20202020 0x6e492020
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000003, 0: 0x286c6574 0x50202952 0x69746e65 0x52286d75
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000004, 0: 0x20442029 0x20555043 0x30382e32 0x007a4847
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000006, 0: 0x00000000 0x00000000 0x04006040 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| CPUID[1] level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| hostCPUID vendor: GenuntelineI
Oct 21 18:58:13.314: vmx| hostCPUID   name:               Intel(R) Pentium(R) D CPU 2.80GHz
Oct 21 18:58:13.314: vmx| hostCPUID level 00000000, 0: 0x00000005 0x756e6547 0x6c65746e 0x49656e69
Oct 21 18:58:13.314: vmx| hostCPUID level 00000001, 0: 0x00000f47 0x00020800 0x0000641d 0xbfebfbff
Oct 21 18:58:13.314: vmx| hostCPUID level 00000002, 0: 0x605b5101 0x00000000 0x00000000 0x007c7040
Oct 21 18:58:13.314: vmx| hostCPUID level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| hostCPUID level 00000004, 0: 0x04000121 0x01c0003f 0x0000001f 0x00000000
Oct 21 18:58:13.314: vmx| hostCPUID level 00000005, 0: 0x00000040 0x00000040 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| hostCPUID level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| hostCPUID level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20100000
Oct 21 18:58:13.314: vmx| hostCPUID level 80000002, 0: 0x20202020 0x20202020 0x20202020 0x6e492020
Oct 21 18:58:13.314: vmx| hostCPUID level 80000003, 0: 0x286c6574 0x50202952 0x69746e65 0x52286d75
Oct 21 18:58:13.314: vmx| hostCPUID level 80000004, 0: 0x20442029 0x20555043 0x30382e32 0x007a4847
Oct 21 18:58:13.314: vmx| hostCPUID level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.314: vmx| hostCPUID level 80000006, 0: 0x00000000 0x00000000 0x04006040 0x00000000
Oct 21 18:58:13.314: vmx| hostCPUID level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.315: vmx| hostCPUID level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Oct 21 18:58:13.315: vmx| CPUID Maximum Physical Address Bits supported across all CPUs: 36
Oct 21 18:58:13.317: vmx| Host ACPI: can't find SRAT
Oct 21 18:58:13.317: vmx| Host: SRAT tables not found in memory
Oct 21 18:58:13.318: vmx| ACL_InitCapabilities: current IPC thread
Oct 21 18:58:13.319: vmx| ACL_InitCapabilities: done
Oct 21 18:58:13.319: vmx| changing directory to /Linux/Daten/VMware/Gentoo10/.
Oct 21 18:58:13.319: vmx| Config file: /Linux/Daten/VMware/Gentoo10/Gentoo10.vmx
Oct 21 18:58:13.441: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Oct 21 18:58:13.524: vmx| VMXVmdbCbVmVmxExecState: Exec state change requested to state poweredOn without reset
Oct 21 18:58:13.524: vmx| TOOLS delaying state change request to state 4
Oct 21 18:58:13.524: vmx| PowerOn
Oct 21 18:58:13.524: vmx| VMX_PowerOn: VMX build 185404, UI build 185404
Oct 21 18:58:13.524: vmx| Host ACPI: can't find SRAT
Oct 21 18:58:13.524: vmx| Host: SRAT tables not found in memory
Oct 21 18:58:13.536: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Oct 21 18:58:13.540: vmx| HOST sysname Linux, nodename localhost, release 2.6.31-gentoo-r3, version #1 SMP Sun Oct 18 08:19:16 CEST 2009, machine i686, SMP, hz=100
Oct 21 18:58:13.540: vmx| DICT --- USER PREFERENCES
Oct 21 18:58:13.540: vmx| DICT       pref.grabOnKeyPress = FALSE
Oct 21 18:58:13.540: vmx| DICT       pref.eula.0.appName = VMware Player
Oct 21 18:58:13.540: vmx| DICT   pref.eula.0.buildNumber = 185404
Oct 21 18:58:13.540: vmx| DICT     pref.mruDest0.present = FALSE
Oct 21 18:58:13.540: vmx| DICT  pref.mruDest0.destString =
Oct 21 18:58:13.540: vmx| DICT        pref.mruDest0.user =
Oct 21 18:58:13.540: vmx| DICT     pref.mruDest1.present = FALSE
Oct 21 18:58:13.540: vmx| DICT  pref.mruDest1.destString =
Oct 21 18:58:13.540: vmx| DICT        pref.mruDest1.user =
Oct 21 18:58:13.540: vmx| DICT     pref.mruDest2.present = FALSE
Oct 21 18:58:13.540: vmx| DICT  pref.mruDest2.destString =
Oct 21 18:58:13.540: vmx| DICT        pref.mruDest2.user =
Oct 21 18:58:13.540: vmx| DICT     pref.mruDest3.present = FALSE
Oct 21 18:58:13.540: vmx| DICT  pref.mruDest3.destString =
Oct 21 18:58:13.540: vmx| DICT        pref.mruDest3.user =
Oct 21 18:58:13.540: vmx| DICT     pref.mruDest4.present = FALSE
Oct 21 18:58:13.540: vmx| DICT  pref.mruDest4.destString =
Oct 21 18:58:13.540: vmx| DICT        pref.mruDest4.user =
Oct 21 18:58:13.540: vmx| DICT     pref.mruDest5.present = FALSE
Oct 21 18:58:13.541: vmx| DICT  pref.mruDest5.destString =
Oct 21 18:58:13.541: vmx| DICT        pref.mruDest5.user =
Oct 21 18:58:13.541: vmx| DICT     pref.mruDest6.present = FALSE
Oct 21 18:58:13.541: vmx| DICT  pref.mruDest6.destString =
Oct 21 18:58:13.541: vmx| DICT        pref.mruDest6.user =
Oct 21 18:58:13.541: vmx| DICT     pref.mruDest7.present = FALSE
Oct 21 18:58:13.541: vmx| DICT  pref.mruDest7.destString =
Oct 21 18:58:13.541: vmx| DICT        pref.mruDest7.user =
Oct 21 18:58:13.541: vmx| DICT      pref.mruATS0.present = FALSE
Oct 21 18:58:13.541: vmx| DICT    pref.mruATS0.atsString =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS0.domain =
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS0.user =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS0.secure = FALSE
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS0.port = 0
Oct 21 18:58:13.541: vmx| DICT      pref.mruATS1.present = FALSE
Oct 21 18:58:13.541: vmx| DICT    pref.mruATS1.atsString =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS1.domain =
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS1.user =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS1.secure = FALSE
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS1.port = 0
Oct 21 18:58:13.541: vmx| DICT      pref.mruATS2.present = FALSE
Oct 21 18:58:13.541: vmx| DICT    pref.mruATS2.atsString =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS2.domain =
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS2.user =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS2.secure = FALSE
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS2.port = 0
Oct 21 18:58:13.541: vmx| DICT      pref.mruATS3.present = FALSE
Oct 21 18:58:13.541: vmx| DICT    pref.mruATS3.atsString =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS3.domain =
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS3.user =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS3.secure = FALSE
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS3.port = 0
Oct 21 18:58:13.541: vmx| DICT      pref.mruATS4.present = FALSE
Oct 21 18:58:13.541: vmx| DICT    pref.mruATS4.atsString =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS4.domain =
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS4.user =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS4.secure = FALSE
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS4.port = 0
Oct 21 18:58:13.541: vmx| DICT      pref.mruATS5.present = FALSE
Oct 21 18:58:13.541: vmx| DICT    pref.mruATS5.atsString =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS5.domain =
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS5.user =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS5.secure = FALSE
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS5.port = 0
Oct 21 18:58:13.541: vmx| DICT      pref.mruATS6.present = FALSE
Oct 21 18:58:13.541: vmx| DICT    pref.mruATS6.atsString =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS6.domain =
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS6.user =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS6.secure = FALSE
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS6.port = 0
Oct 21 18:58:13.541: vmx| DICT      pref.mruATS7.present = FALSE
Oct 21 18:58:13.541: vmx| DICT    pref.mruATS7.atsString =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS7.domain =
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS7.user =
Oct 21 18:58:13.541: vmx| DICT       pref.mruATS7.secure = FALSE
Oct 21 18:58:13.541: vmx| DICT         pref.mruATS7.port = 0
Oct 21 18:58:13.541: vmx| DICT   pref.registrationViewed = FALSE
Oct 21 18:58:13.541: vmx| DICT       pref.usbDev.maxDevs = 0
Oct 21 18:58:13.541: vmx| DICT pref.keyboardAndMouse.maxProfiles = 0
Oct 21 18:58:13.541: vmx| DICT   webUpdate.lastCheckTime = 1256144290
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos0.index = 2
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos0.vmPath = /vm/#6a2d5e3b935ae6bc/
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos0.geometry = 728x502+699+0
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos1.index = 0
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos1.vmPath = /vm/#e0666b004b59ecd1/
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos1.geometry = 1032x827+0+0
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos2.index = 1
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos2.vmPath = /vm/#090ee124b0741209/
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.vmPos2.geometry = 1032x827+0+0
Oct 21 18:58:13.541: vmx| DICT pref.vmplayer.exit.vmAction = poweroff
Oct 21 18:58:13.542: vmx| DICT pref.vmplayer.confirmOnExit = TRUE
Oct 21 18:58:13.542: vmx| DICT --- USER DEFAULTS
Oct 21 18:58:13.542: vmx| DICT --- HOST DEFAULTS
Oct 21 18:58:13.542: vmx| DICT               VMCI_CONFED = yes
Oct 21 18:58:13.542: vmx| DICT                NETWORKING = yes
Oct 21 18:58:13.542: vmx| DICT             initscriptdir = /etc/init.d
Oct 21 18:58:13.542: vmx| DICT            VMBLOCK_CONFED = yes
Oct 21 18:58:13.542: vmx| DICT            authd.fullpath = /opt/vmware/player/sbin/vmware-authd
Oct 21 18:58:13.542: vmx| DICT           gksu.rootMethod = su
Oct 21 18:58:13.542: vmx| DICT              VSOCK_CONFED = yes
Oct 21 18:58:13.542: vmx| DICT                    libdir = /opt/vmware/player/lib/vmware
Oct 21 18:58:13.542: vmx| DICT                    bindir = /opt/vmware/player/bin
Oct 21 18:58:13.542: vmx| DICT       product.buildNumber = 185404
Oct 21 18:58:13.542: vmx| DICT --- SITE DEFAULTS
Oct 21 18:58:13.542: vmx| DICT                  tag.help = introduction.htm
Oct 21 18:58:13.542: vmx| DICT   tag.configurationEditor = config_editor_newvm.htm
Oct 21 18:58:13.542: vmx| DICT             tag.ideConfig = devices_virtualdrive.htm
Oct 21 18:58:13.542: vmx| DICT          tag.floppyConfig = devices_floppy.htm
Oct 21 18:58:13.542: vmx| DICT           tag.mouseConfig = devices_mouse.htm
Oct 21 18:58:13.542: vmx| DICT             tag.netConfig = devices_netadapter.htm
Oct 21 18:58:13.542: vmx| DICT        tag.parallelConfig = devices_parallel.htm
Oct 21 18:58:13.542: vmx| DICT          tag.serialConfig = devices_serial.htm
Oct 21 18:58:13.542: vmx| DICT           tag.soundConfig = devices_sound.htm
Oct 21 18:58:13.542: vmx| DICT             tag.memConfig = configvm_memory.htm
Oct 21 18:58:13.542: vmx| DICT            tag.miscConfig = configvm.htm
Oct 21 18:58:13.542: vmx| DICT             tag.usbConfig = devices_usb.htm
Oct 21 18:58:13.542: vmx| DICT         tag.displayConfig = configvm_display-problems.htm
Oct 21 18:58:13.542: vmx| DICT                 tag.tools = vmtools.htm
Oct 21 18:58:13.542: vmx| DICT --- COMMAND LINE
Oct 21 18:58:13.542: vmx| DICT             gui.available = TRUE
Oct 21 18:58:13.542: vmx| DICT --- CONFIGURATION
Oct 21 18:58:13.542: vmx| DICT            config.version = 8
Oct 21 18:58:13.542: vmx| DICT         virtualHW.version = 4
Oct 21 18:58:13.542: vmx| DICT             scsi0.present = TRUE
Oct 21 18:58:13.542: vmx| DICT                   memsize = 1024
Oct 21 18:58:13.542: vmx| DICT            ide0:0.present = TRUE
Oct 21 18:58:13.542: vmx| DICT           ide0:0.fileName = Gentoo10-sparse.vmdk
Oct 21 18:58:13.542: vmx| DICT            ide1:0.present = TRUE
Oct 21 18:58:13.542: vmx| DICT           ide1:0.fileName = /dev/hda
Oct 21 18:58:13.542: vmx| DICT         ide1:0.deviceType = cdrom-raw
Oct 21 18:58:13.542: vmx| DICT          floppy0.fileName = disabled
Oct 21 18:58:13.542: vmx| DICT           floppy0.present = FALSE
Oct 21 18:58:13.542: vmx| DICT          floppy0.fileType = device
Oct 21 18:58:13.542: vmx| DICT               usb.present = TRUE
Oct 21 18:58:13.542: vmx| DICT             sound.present = TRUE
Oct 21 18:58:13.542: vmx| DICT          sound.virtualDev = es1371
Oct 21 18:58:13.542: vmx| DICT               displayName = Gentoo10
Oct 21 18:58:13.542: vmx| DICT                   guestOS = linux
Oct 21 18:58:13.542: vmx| DICT           serial0.present = FALSE
Oct 21 18:58:13.542: vmx| DICT          serial0.fileName = COM1
Oct 21 18:58:13.542: vmx| DICT           serial1.present = FALSE
Oct 21 18:58:13.542: vmx| DICT          serial1.fileName = COM2
Oct 21 18:58:13.542: vmx| DICT         parallel0.present = FALSE
Oct 21 18:58:13.542: vmx| DICT        parallel0.fileName = LPT1
Oct 21 18:58:13.542: vmx| DICT   parallel0.bidirectional = FALSE
Oct 21 18:58:13.542: vmx| DICT         ethernet0.present = TRUE
Oct 21 18:58:13.542: vmx| DICT  ethernet0.connectionType = bridged
Oct 21 18:58:13.542: vmx| DICT                     nvram = linux.nvram
Oct 21 18:58:13.542: vmx| DICT        extendedConfigFile = Gentoo10.vmxf
Oct 21 18:58:13.542: vmx| DICT virtualHW.productCompatibility = hosted
Oct 21 18:58:13.542: vmx| DICT      tools.upgrade.policy = manual
Oct 21 18:58:13.542: vmx| DICT        checkpoint.vmState = Gentoo10.vmss
Oct 21 18:58:13.542: vmx| DICT     ethernet0.addressType = generated
Oct 21 18:58:13.542: vmx| DICT            tools.syncTime = FALSE
Oct 21 18:58:13.542: vmx| DICT             uuid.location = 56 4d 3e ac c0 a1 29 e6-f5 18 ee a6 d0 33 c7 b0
Oct 21 18:58:13.542: vmx| DICT                 uuid.bios = 56 4d 3e ac c0 a1 29 e6-f5 18 ee a6 d0 33 c7 b0
Oct 21 18:58:13.542: vmx| DICT               ide0:0.redo =
Oct 21 18:58:13.542: vmx| DICT   usb.autoConnect.device0 = path:5/0 autoclean:1
Oct 21 18:58:13.542: vmx| DICT  vmotion.checkpointFBSize = 16777216
Oct 21 18:58:13.542: vmx| DICT ethernet0.generatedAddress = 00:0c:29:33:c7:b0
Oct 21 18:58:13.543: vmx| DICT ethernet0.generatedAddressOffset = 0
Oct 21 18:58:13.543: vmx| DICT    debugStub.linuxOffsets = 0x0,0xffffffff,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0
Oct 21 18:58:13.543: vmx| DICT         vmx.onpoweronkeys = 1
Oct 21 18:58:13.543: vmx| DICT        vmx.onpoweron0.key = memsize
Oct 21 18:58:13.543: vmx| DICT      vmx.onpoweron0.value = 1104
Oct 21 18:58:13.543: vmx| DICT --- USER DEFAULTS
Oct 21 18:58:13.543: vmx| DICT --- HOST DEFAULTS
Oct 21 18:58:13.543: vmx| DICT               VMCI_CONFED = yes
Oct 21 18:58:13.543: vmx| DICT                NETWORKING = yes
Oct 21 18:58:13.543: vmx| DICT             initscriptdir = /etc/init.d
Oct 21 18:58:13.543: vmx| DICT            VMBLOCK_CONFED = yes
Oct 21 18:58:13.543: vmx| DICT            authd.fullpath = /opt/vmware/player/sbin/vmware-authd
Oct 21 18:58:13.543: vmx| DICT           gksu.rootMethod = su
Oct 21 18:58:13.543: vmx| DICT              VSOCK_CONFED = yes
Oct 21 18:58:13.543: vmx| DICT                    libdir = /opt/vmware/player/lib/vmware
Oct 21 18:58:13.543: vmx| DICT                    bindir = /opt/vmware/player/bin
Oct 21 18:58:13.543: vmx| DICT       product.buildNumber = 185404
Oct 21 18:58:13.543: vmx| DICT --- SITE DEFAULTS
Oct 21 18:58:13.543: vmx| DICT                  tag.help = introduction.htm
Oct 21 18:58:13.543: vmx| DICT   tag.configurationEditor = config_editor_newvm.htm
Oct 21 18:58:13.543: vmx| DICT             tag.ideConfig = devices_virtualdrive.htm
Oct 21 18:58:13.543: vmx| DICT          tag.floppyConfig = devices_floppy.htm
Oct 21 18:58:13.543: vmx| DICT           tag.mouseConfig = devices_mouse.htm
Oct 21 18:58:13.543: vmx| DICT             tag.netConfig = devices_netadapter.htm
Oct 21 18:58:13.543: vmx| DICT        tag.parallelConfig = devices_parallel.htm
Oct 21 18:58:13.543: vmx| DICT          tag.serialConfig = devices_serial.htm
Oct 21 18:58:13.543: vmx| DICT           tag.soundConfig = devices_sound.htm
Oct 21 18:58:13.543: vmx| DICT             tag.memConfig = configvm_memory.htm
Oct 21 18:58:13.543: vmx| DICT            tag.miscConfig = configvm.htm
Oct 21 18:58:13.543: vmx| DICT             tag.usbConfig = devices_usb.htm
Oct 21 18:58:13.543: vmx| DICT         tag.displayConfig = configvm_display-problems.htm
Oct 21 18:58:13.543: vmx| DICT                 tag.tools = vmtools.htm
Oct 21 18:58:13.543: vmx| DICT --- GLOBAL SETTINGS
Oct 21 18:58:13.546: vmx| DUMPER: restoring checkpoint version 8
Oct 21 18:58:13.546: vmx| Checkpointed in VMware Workstation, 6.5.3 build-185404, build-185404, Linux Host
Oct 21 18:58:13.546: vmx| Resuming virtual machine from /Linux/Daten/VMware/Gentoo10/Gentoo10.vmss with 1024 MB of memory.
Oct 21 18:58:13.546: vmx| hostCpuFeatures = 0xc001fc
Oct 21 18:58:13.546: vmx| hostNumPerfCounters = 26
Oct 21 18:58:13.546: vmx| CPU0: PMC: P4 [c:0 f:0 e:0]
Oct 21 18:58:13.546: vmx| CPU1: PMC: P4 [c:0 f:0 e:0]
Oct 21 18:58:13.546: vmx| MONITOR MODE: allowed modes          : BT
Oct 21 18:58:13.546: vmx| MONITOR MODE: user requested modes   : BT HV HWMMU
Oct 21 18:58:13.546: vmx| MONITOR MODE: guestOS preferred modes: HWMMU BT HV
Oct 21 18:58:13.546: vmx| MONITOR MODE: filtered list          : BT
Oct 21 18:58:13.546: vmx| HV Settings: virtual exec = 'software'; virtual mmu = 'software'
Oct 21 18:58:13.670: vmx| Host: Disabling thread priority boosting to work around Linux SMP bug.
Oct 21 18:58:13.671: vmx| WSSCAN: reserved mem (in MB) min=32 max=1952 recommended=1952
Oct 21 18:58:13.671: vmx| WSSCAN: used rec mem (in MB) 1952
Oct 21 18:58:13.671: vmx| PSHARE: deactivated
Oct 21 18:58:13.671: vmx| WSSCAN: Overhead 267550 paged 16523 nonpaged 4096 maxFBSize
Oct 21 18:58:13.671: vmx| WSSCAN 1 0 450462 458654 499712 -1 50 0
Oct 21 18:58:13.671: vmx| LICENSE: Running in restricted mode
Oct 21 18:58:13.692: vmx| LOG failed to remove stats/stats32-2 failed: No such file or directory
Oct 21 18:58:13.692: vmx| LOG failed to remove stats/stats64-2 failed: No such file or directory
Oct 21 18:58:13.692: vmx| LOG failed to remove stats32-2 failed: No such file or directory
Oct 21 18:58:13.692: vmx| LOG failed to remove stats64-2 failed: No such file or directory
Oct 21 18:58:13.693: vmx| Monitor_PowerOn: HostedVSMP skew tracking is disabled
Oct 21 18:58:13.693: vmx| Monitor_PowerOn: HostedVSMP crosscall yielding is disabled
Oct 21 18:58:13.694: vmx| vmm32-modules: [vmm.vmm32 .data:0x2b000-0x728 .sdata:0x2c000-0x4e4 .statvars:0x2d000-0x3a0 .peer:0x2e000-0x261c0 .shared:0x56000-0x12b00 .bss:0x6a000-0x5c88 .rodata:0x71000-0xb430 .text:0x7d000-0x5912d .kstatvars:0x3000-0x0, mmu-pae.vmm32 .rodata:0x7c430-0x44 .data:0x2b728-0xc .peer:0x541c0-0x16c0 .shared:0x68b00-0x2c0 .bss:0x6fca0-0x518 .text:0xd6130-0xa4e7 .comment:0x40000d26-0x10e .statvars:0x2000-0x0 .kstatvars:0x2000-0x0 .scb:0x40003900-0x180 .shared_meta:0x40003c00-0x390 .peer_meta:0x40001080-0x210, sharedmmu-none.vmm32 .text:0xe0618-0x32 .comment:0x40000e34-0x12, pv-none.vmm32 .shared:0x68dc0-0x180 .bss:0x701c0-0x84 .text:0xe064c-0xe6 .comment:0x40000e46-0x48 .shared_meta:0x40003f90-0x90, vprobe-none.vmm32 .text:0xe0734-0x79 .comment:0x40000e8e-0x12, hv-none.vmm32 .rodata:0x7c474-0x4 .data:0x1000-0x0 .peer:0x1000-0x0 .shared:0x1000-0x0 .bss:0x1000-0x0 .text:0xe07b0-0x2d .comment:0x40000ea0-0x12 .statvars:0x1000-0x0 .kstatvars:0x1000-0x0, gphys-sw.vmm32 .peer:0x55880-0x40 .shared:0x68f40-0x140 .bss:0x2000-0x0 .text:0xe07e0-0xb57 .comment:0x40000eb2-0x12 .scb:0x40003a80-0x60 .shared_meta:0x40004020-0x2a0 .peer_meta:0x40001290-0x60, vassert-none.vmm32 .text:0xe1338-0xf .comment:0x40000ec4-0x12, vmsafe-none.vmm32 .text:0xe1348-0xd .comment:0x40000ed6-0x12, buslogic-buslogic.vmm32 .shared:0x69080-0x40 .bss:0x1000-0x0 .text:0xe1360-0xc9 .comment:0x40000ee8-0x12 .scb:0x40003ae0-0x60 .shared_meta:0x400042c0-0x60, {SharedAreaReservations} .shared:0x690c0-0x40, <MonSrcFile> .rodata:0x7c478-0x38c]
Oct 21 18:58:13.697: vmx| KHZEstimate 2808671
Oct 21 18:58:13.697: vmx| MHZEstimate 2809
Oct 21 18:58:13.697: vmx| NumVCPUs 1
Oct 21 18:58:13.697: vmx| PShare: enabled 0, scanRate 0, checkRate 16
Oct 21 18:58:13.697: vmx| UUID: SMBIOS UUID is reported as '80 07 70 03 8e fe d5 11-b2 1f 00 18 f3 4f 6c a7'.
Oct 21 18:58:13.697: vmx| UUID: location-UUID is 56 4d 3e ac c0 a1 29 e6-f5 18 ee a6 d0 33 c7 b0
Oct 21 18:58:13.698: vmx| AIOGNRC: numThreads=4 ide=1, scsi=0, passthru=1
Oct 21 18:58:13.698: vmx| WORKER: Creating new group with numThreads=4 (4)
Oct 21 18:58:13.698: vmx| Replay State = 0
Oct 21 18:58:13.698: vmx| minDEThreshold: 77
Oct 21 18:58:13.698: vmx| MM: Using partialmap, 262144 pages AC 0 CE 1 TM 0 DOHU 0
Oct 21 18:58:13.698: vmx| MStat: Creating Stat vm.uptime
Oct 21 18:58:13.698: vmx| MStat: Creating Stat vm.suspendTime
Oct 21 18:58:13.698: vmx| MStat: Creating Stat vm.powerOnTimeStamp
Oct 21 18:58:13.699: vmx| VMXAIOMGR: Using: simple=Generic unbuf=Generic
Oct 21 18:58:13.712: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Oct 21 18:58:13.718: vmx| DISK: OPEN ide0:0 '/Linux/Daten/VMware/Gentoo10/Gentoo10-sparse.vmdk' persistent R[]
Oct 21 18:58:13.941: vmx| DISKLIB-DSCPTR: Opened [0]: "Gentoo10-sparse.vmdk" (0xa)
Oct 21 18:58:13.942: vmx| DISKLIB-LINK  : Opened '/Linux/Daten/VMware/Gentoo10/Gentoo10-sparse.vmdk' (0xa): monolithicSparse, 43515904 sectors / 20.8 GB.
Oct 21 18:58:13.942: vmx| DISKLIB-LIB   : Opened "/Linux/Daten/VMware/Gentoo10/Gentoo10-sparse.vmdk" (flags 0xa).
Oct 21 18:58:13.942: vmx| DiskGetGeometry: Reading of disk partition table
Oct 21 18:58:13.942: vmx| DISK: OPEN '/Linux/Daten/VMware/Gentoo10/Gentoo10-sparse.vmdk' Geo (16383/16/63) BIOS Geo (46048/15/63) freeSpace=24364 MB, ide
Oct 21 18:58:13.952: vmx| TimeTracker host to guest rate conversion 47708998161160 @ 2808671000Hz -> 47708998161160 @ 2808671000Hz
Oct 21 18:58:13.952: vmx| TimeTracker host to guest rate conversion ((x * 2147483648) >> 31) + 0
Oct 21 18:58:13.953: vmx| USB: Search for USB devices to connect [path:5/0 autoclean:1]
Oct 21 18:58:13.953: vmx| USB: Initializing 'Generic' backend
Oct 21 18:58:13.953: vmx| USBGL: Usbfs found at /proc/bus/usb
Oct 21 18:58:13.954: vmx| USB: Initializing 'Virtual Hub' backend
Oct 21 18:58:13.954: vmx| USB: Initializing 'Virtual Mouse' backend
Oct 21 18:58:13.954: vmx| USB: Initializing 'Virtual Keyboard' backend
Oct 21 18:58:13.954: vmx| USB: Initializing 'Virtual Mass Storage' backend
Oct 21 18:58:13.954: vmx| USB: Initializing 'Virtual CCID' backend
Oct 21 18:58:13.997: vmx| USB-CCID:  dlopened default libpcsclite.so.1.
Oct 21 18:58:13.997: vmx| USB-CCID: Could not establish resource manager context for card ops: SCARD_E_NO_SERVICE(0x8010001d).
Oct 21 18:58:13.997: vmx| USB: Unable to initialize 'Virtual CCID' backend
Oct 21 18:58:14.008: vmx| XINFO X fd is 133
Oct 21 18:58:14.008: vmx| XINFO depth 24 bpp 32 class 4
Oct 21 18:58:14.087: vmx| WORKER: Creating new group with numThreads=1 (5)
Oct 21 18:58:14.088: vmx| MKS REMOTE Loading VNC Configuration from VM config file
Oct 21 18:58:14.090: vmx| VLANCE: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks
Oct 21 18:58:14.090: vmx| VMXNET: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks, dontClusterSize is 128
Oct 21 18:58:14.090: vmx| NetPkt: checksum cycles/kB: C=751 asm1=3071 asm2=3012
Oct 21 18:58:14.091: vmx| NetPkt: copy and sum cycles/kB: C=1140 asm1=2687 asm2=2681
Oct 21 18:58:14.091: vmx| Chipset version: 0
Oct 21 18:58:14.094: vmx| DISKUTIL: ide0:0 : capacity=43515904
Oct 21 18:58:14.094: vmx| DISKUTIL: ide0:0 : capacity=43515904
Oct 21 18:58:14.094: vmx| DISKUTIL: ide0:0 : geometry=46048/15/63
Oct 21 18:58:14.094: vmx| DISKUTIL: ide1:0 : capacity=0
Oct 21 18:58:14.094: vmx| DISKUTIL: ide1:0 : geometry=0/0/0
Oct 21 18:58:14.094: vmx| SCSI0: UNTAGGED commands will be converted to ORDER tags.
Oct 21 18:58:14.095: vmx| XINFO X fd is 133
Oct 21 18:58:14.095: vmx| XINFO depth 24 bpp 32 class 4
Oct 21 18:58:14.101: vmx| Host display topology 1440x900 with 1 displays.
Oct 21 18:58:14.101: vmx| SVGA using 2360x1770.
Oct 21 18:58:14.101: vmx| USB: Initializing 'UHCI' host controller
Oct 21 18:58:14.102: vmx| Ethernet0 MAC Address: 00:0c:29:33:c7:b0
Oct 21 18:58:14.103: vmx| MStat: Creating Stat vm.heartbeat
Oct 21 18:58:14.103: vmx| DISKUTIL: ide0:0 : toolsVersion = 0
Oct 21 18:58:14.103: vmx| DISKUTIL: Offline toolsVersion = 0
Oct 21 18:58:14.104: vmx| TOOLS INSTALL initializing state to IDLE on power on.
Oct 21 18:58:14.110: vmx| PTSC to VMI Wallclock (nsec) 47709441214960 @ 2808671000Hz -> 1256144294000000000 @ 1000000000Hz
Oct 21 18:58:14.110: vmx| PTSC to VMI Wallclock (nsec) ((x * 3058362688) >> 33) + 1256127307517354014
Oct 21 18:58:14.110: vmx| PTSC to ParaTime RealCycles 0 @ 2808671000Hz -> 0 @ 2808671000Hz
Oct 21 18:58:14.110: vmx| PTSC to ParaTime RealCycles ((x * 1) >> 0) + 0
Oct 21 18:58:14.110: vmx| ParaTime RealCycles to PTSC 0 @ 2808671000Hz -> 0 @ 2808671000Hz
Oct 21 18:58:14.110: vmx| ParaTime RealCycles to PTSC ((x * 1) >> 0) + 0
Oct 21 18:58:14.110: vmx| CPT: Restoring checkpoint /Linux/Daten/VMware/Gentoo10/Gentoo10.vmss
Oct 21 18:58:14.110: vmx| DUMPER: restoring checkpoint version 8
Oct 21 18:58:14.115: vmx| DUMPER: Item guestCpuid400:eax [0, -1] not found
Oct 21 18:58:14.115: vmx| DUMPER: Item guestCpuid410:eax [0, -1] not found
Oct 21 18:58:14.115: vmx| DUMPER: Item guestCpuid8A:eax [0, -1] not found
Oct 21 18:58:14.115: vmx| DUMPER: Item migrateCpuid400:eax [0, -1] not found
Oct 21 18:58:14.116: vmx| DUMPER: Item migrateCpuid410:eax [0, -1] not found
Oct 21 18:58:14.116: vmx| DUMPER: Item migrateCpuid80:eax [0, -1] not found
Oct 21 18:58:14.116: vmx| DUMPER: Item migrateCpuid88:eax [0, -1] not found
Oct 21 18:58:14.116: vmx| DUMPER: Item hostCpuid400:eax [0, -1] not found
Oct 21 18:58:14.116: vmx| DUMPER: Item hostCpuid410:eax [0, -1] not found
Oct 21 18:58:14.116: vmx| DUMPER: Item hostCpuid8A:eax [0, -1] not found
Oct 21 18:58:14.116: vmx| cptCPUID : vendor: GenuntelineI
Oct 21 18:58:14.116: vmx| cptCPUID : level 00000000, 0: 0x00000005 0x756e6547 0x6c65746e 0x49656e69
Oct 21 18:58:14.116: vmx| cptCPUID : level 00000001, 0: 0x00000668 0x00010800 0x00000001 0x0febfbff
Oct 21 18:58:14.116: vmx| cptCPUID : level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.116: vmx| cptCPUID : level 80000001, 0: 0x00000000 0x00000000 0x00000000 0x00100000
Oct 21 18:58:14.116: vmx| cptCPUID : level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.116: vmx| guestCpuFeatures = 0x604001f8
Oct 21 18:58:14.116: vmx| srcCPUID : vendor: GenuntelineI
Oct 21 18:58:14.116: vmx| srcCPUID : level 00000000, 0: 0x00000005 0x756e6547 0x6c65746e 0x49656e69
Oct 21 18:58:14.116: vmx| srcCPUID : level 00000001, 0: 0x00000f47 0x00020800 0x0000641d 0xbfebfbff
Oct 21 18:58:14.116: vmx| srcCPUID : level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.116: vmx| srcCPUID : level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20100000
Oct 21 18:58:14.116: vmx| srcCPUID : level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.116: vmx| dstCPUID : vendor: GenuntelineI
Oct 21 18:58:14.116: vmx| dstCPUID :   name:               Intel(R) Pentium(R) D CPU 2.80GHz
Oct 21 18:58:14.116: vmx| dstCPUID : level 00000000, 0: 0x00000005 0x756e6547 0x6c65746e 0x49656e69
Oct 21 18:58:14.116: vmx| dstCPUID : level 00000001, 0: 0x00000f47 0x00020800 0x0000641d 0xbfebfbff
Oct 21 18:58:14.116: vmx| dstCPUID : level 00000002, 0: 0x605b5101 0x00000000 0x00000000 0x007c7040
Oct 21 18:58:14.117: vmx| dstCPUID : level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.117: vmx| dstCPUID : level 00000004, 0: 0x04000121 0x01c0003f 0x0000001f 0x00000000
Oct 21 18:58:14.117: vmx| dstCPUID : level 00000005, 0: 0x00000040 0x00000040 0x00000000 0x00000000
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000001, 0: 0x00000000 0x00000000 0x00000001 0x20100000
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000002, 0: 0x20202020 0x20202020 0x20202020 0x6e492020
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000003, 0: 0x286c6574 0x50202952 0x69746e65 0x52286d75
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000004, 0: 0x20442029 0x20555043 0x30382e32 0x007a4847
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000006, 0: 0x00000000 0x00000000 0x04006040 0x00000000
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.117: vmx| dstCPUID : level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Oct 21 18:58:14.117: vmx| cpt mask : level 00000000, 0: 0x00000000 0xffffffff 0xffffffff 0xffffffff
Oct 21 18:58:14.117: vmx| cpt mask : level 00000001, 0: 0x00000000 0x00000000 0x7bdb1a03 0x0ffffdff
Oct 21 18:58:14.117: vmx| cpt mask : level 80000001, 0: 0x00000000 0x00000000 0xfffffffe 0xdffff7ff
Oct 21 18:58:14.117: vmx| cpt mask : level 8000000a, 0: 0xffffffff 0xffffffff 0xffffffff 0xffffffff
Oct 21 18:58:14.117: vmx| evcMasksInCpt = 0
Oct 21 18:58:14.117: vmx| evcCompatibilityMode = 0
Oct 21 18:58:14.117: vmx| Warning: expected CPUID field 8000000a not found.
Oct 21 18:58:14.117: vmx| DUMPER: Item paraGuest [0, -1] not found
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid88:edx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item eip [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid0:eax [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid0:ebx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid0:ecx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid0:edx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid1:eax [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid1:ebx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid1:ecx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid1:edx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid80:eax [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid80:ebx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid80:ecx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid80:edx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid81:eax [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid81:ebx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid81:ecx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid81:edx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid88:eax [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid88:ebx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx| DUMPER: item cpuid88:ecx [0,-1] in group cpu not used
Oct 21 18:58:14.117: vmx|   restoring BusMemSample
Oct 21 18:58:14.117: vmx| BusMemSample: checkpoint 4 initPercent 35 touched 94371
Oct 21 18:58:14.117: vmx|   restoring BusMemServices
Oct 21 18:58:14.117: vmx|   restoring UUIDVMX
Oct 21 18:58:14.117: vmx|   restoring StateLogger
Oct 21 18:58:14.118: vmx|   restoring memory
Oct 21 18:58:14.143: vmx| Mapped mainmem as pageable
Oct 21 18:58:14.146: vmx| MM: using '/Linux/Daten/VMware/Gentoo10/Gentoo10.vmem' as a paging file
Oct 21 18:58:14.146: vmx| Opened paging file /Linux/Daten/VMware/Gentoo10/Gentoo10.vmem
Oct 21 18:58:14.146: vmx| Lazy Restore with prefetch of 1024 MB
Oct 21 18:58:18.592: vmx|   restoring MStats
Oct 21 18:58:18.592: vmx|   restoring Snapshot
Oct 21 18:58:18.592: vmx| DUMPER: item cfgFile [-1,-1] in group Snapshot not used
Oct 21 18:58:18.592: vmx| DUMPER: item nvramFile [-1,-1] in group Snapshot not used
Oct 21 18:58:18.592: vmx| DUMPER: item extendedConfigFile [-1,-1] in group Snapshot not used
Oct 21 18:58:18.592: vmx|   restoring pic
Oct 21 18:58:18.592: vmx|   restoring TimeTracker
Oct 21 18:58:18.592: vmx| TimeTracker host to guest rate conversion 47708998161160 @ 2808671000Hz -> 299594784251467 @ 2808627000Hz
Oct 21 18:58:18.592: vmx| TimeTracker host to guest rate conversion ((x * 4294900012) >> 32) + 251886533488835
Oct 21 18:58:18.592: vmx|   restoring Floppy
Oct 21 18:58:18.592: vmx|   restoring GuestMsg
Oct 21 18:58:18.592: vmx|   restoring GuestRpc
Oct 21 18:58:18.593: vmx|   restoring ide1:0
Oct 21 18:58:18.593: vmx| DUMPER: item senseBuf [-1,-1] in group ide1:0 not used
Oct 21 18:58:18.593: vmx|   restoring ide0:0
Oct 21 18:58:18.593: vmx|   restoring PCI
Oct 21 18:58:18.593: vmx|   restoring Cs440bx
Oct 21 18:58:18.594: vmx| DUMPER: Item gpe.status [2, -1] not found
Oct 21 18:58:18.594: vmx| DUMPER: Item gpe.enable [2, -1] not found
Oct 21 18:58:18.594: vmx| DUMPER: item drb [1,-1] in group Cs440bx not used
Oct 21 18:58:18.594: vmx| DUMPER: item drb [0,-1] in group Cs440bx not used
Oct 21 18:58:18.594: vmx|   restoring vide
Oct 21 18:58:18.595: vmx| DUMPER: BlockItem monbuf [0, -1] not found
Oct 21 18:58:18.596: vmx| DUMPER: BlockItem monbuf [1, -1] not found
Oct 21 18:58:18.596: vmx| DUMPER: item setMultiple [0,-1] in group vide not used
Oct 21 18:58:18.596: vmx|   restoring SCSI0
Oct 21 18:58:18.596: vmx|   restoring VGA
Oct 21 18:58:18.600: vmx|   restoring SVGA
Oct 21 18:58:18.605: vmx| SVGA phys sizes: 2360x1770x16 offset 0 fb 0x01000000
Oct 21 18:58:18.606: vmx| SVGA compatible geometry on checkpoint restore
Oct 21 18:58:18.606: vmx| SVGA old geometry 2360x1770, max size = 16777216
Oct 21 18:58:18.606: vmx| SVGA new geometry 2360x1770, max size = 16777216
Oct 21 18:58:18.644: vmx| DUMPER: Item CursorType [-1, -1] not found
Oct 21 18:58:18.644: vmx|   restoring usb
Oct 21 18:58:18.645: vmx| DUMPER: Item lastFrnumChangeTime [-1, -1] not found
Oct 21 18:58:18.645: vmx|   restoring Ethernet0
Oct 21 18:58:18.645: vmx|   restoring sound
Oct 21 18:58:18.645: vmx|   restoring OEMDevice
Oct 21 18:58:18.645: vmx|   restoring Timer
Oct 21 18:58:18.646: vmx|   restoring Tools
Oct 21 18:58:18.646: vmx|   restoring Tools Install
Oct 21 18:58:18.646: vmx| TOOLS INSTALL setting state to 0 on restore.
Oct 21 18:58:18.646: vmx|   restoring MKSVMX
Oct 21 18:58:18.646: vmx| DUMPER: item imageData [-1,-1] in group MKSVMX not used
Oct 21 18:58:18.646: vmx|   restoring DMA
Oct 21 18:58:18.646: vmx|   restoring BackdoorAPM
Oct 21 18:58:18.646: vmx|   restoring CMOS
Oct 21 18:58:18.646: vmx|   restoring FlashRam
Oct 21 18:58:18.646: vmx|   restoring A20
Oct 21 18:58:18.646: vmx|   restoring Keyboard
Oct 21 18:58:18.647: vmx|   restoring backdoorAbsMouse
Oct 21 18:58:18.647: vmx|   restoring SIO
Oct 21 18:58:18.647: vmx|   restoring serial0
Oct 21 18:58:18.647: vmx|   restoring serial1
Oct 21 18:58:18.647: vmx|   restoring serial2
Oct 21 18:58:18.647: vmx|   restoring serial3
Oct 21 18:58:18.647: vmx|   restoring parallel0
Oct 21 18:58:18.647: vmx|   restoring parallel1
Oct 21 18:58:18.647: vmx|   restoring parallel2
Oct 21 18:58:18.647: vmx|   restoring ParaTime
Oct 21 18:58:18.648: vmx|   restoring VAssert
Oct 21 18:58:18.648: vmx|   restoring monitorLate
Oct 21 18:58:18.648: vmx|   restoring devices
Oct 21 18:58:18.648: vmx|   restoring vmDebugControl
Oct 21 18:58:18.648: vmx| DUMPER: Dumper_EndRestore: update hdr magic
Oct 21 18:58:18.679: vmx| VMXVmdb_LoadRawConfig: Loading raw config
Oct 21 18:58:18.684: vmx| guestCPUID vendor: GenuntelineI
Oct 21 18:58:18.684: vmx| guestCPUID level 00000000, 0: 0x00000005 0x756e6547 0x6c65746e 0x49656e69
Oct 21 18:58:18.684: vmx| guestCPUID level 00000001, 0: 0x00000668 0x00010800 0x00000001 0x0febfbff
Oct 21 18:58:18.684: vmx| guestCPUID level 80000000, 0: 0x80000008 0x00000000 0x00000000 0x00000000
Oct 21 18:58:18.684: vmx| guestCPUID level 80000001, 0: 0x00000000 0x00000000 0x00000000 0x00100000
Oct 21 18:58:18.684: vmx| guestCPUID level 80000008, 0: 0x00003024 0x00000000 0x00000000 0x00000000
Oct 21 18:58:18.693: vmx| SVGA: Registering IOSpace at 0x1470
Oct 21 18:58:18.693: vmx| BusMemSample: initPercent 35 touched 94371
Oct 21 18:58:18.693: vmx| TOOLS received request in VMX to set option 'enableDnD' -> '1'
Oct 21 18:58:18.693: vmx| TOOLS received request in VMX to set option 'copypaste' -> '1'
Oct 21 18:58:18.727: vmx| USB: Autoconnecting device "Ultima USB Device" matching pattern [path:5/0 autoclean:1]
Oct 21 18:58:18.727: vmx| USB: Connecting device 0x5000205d84002
Oct 21 18:58:18.727: vmx| VMXVmdbLoadUsbDevices: New set of 1 USB devices
Oct 21 18:58:18.727: vmx| USB: Found device [name:Ultima\ USB\ Device vid:05d8 pid:4002 path:5/0 speed:full family:vendor]
Oct 21 18:58:18.727: vmx| VMX_PowerOn: ModuleTable_PowerOn = 1
Oct 21 18:58:18.727: vmx| VMX setting maximum IPC write buffers to 0 packets, 0 bytes
Oct 21 18:58:18.728: mks| Async MKS thread is alive
Oct 21 18:58:18.728: mks| Connecting to window system.
Oct 21 18:58:18.729: mks| XINFO X fd is 133
Oct 21 18:58:18.729: mks| XINFO depth 24 bpp 32 class 4
Oct 21 18:58:18.735: mks| XKeymap_PowerOn: use xkb keycode mapping.
Oct 21 18:58:18.735: mks| rasterops MMXEXT accelerations enabled
Oct 21 18:58:18.736: mks| XINFO unsupported XF86VidMode version: 2.2
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 0: 1440x900 flags: 0x6
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 1: 1440x900 flags: 0x6
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 2: 1152x864 flags: 0x5
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 3: 1024x768 flags: 0x5
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 4: 1024x768 flags: 0xa
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 5: 1024x768 flags: 0x6
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 6: 1024x768 flags: 0xa
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 7: 832x624 flags: 0xa
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 8: 800x600 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 9: 800x600 flags: 0x5
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 10: 800x600 flags: 0x5
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 11: 800x600 flags: 0x5
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 12: 800x600 flags: 0x5
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 13: 640x512 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 14: 640x512 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 15: 640x480 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 16: 640x480 flags: 0xa
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 17: 640x480 flags: 0xa
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 18: 640x480 flags: 0xa
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 19: 640x480 flags: 0x6
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 20: 640x480 flags: 0xa
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 21: 640x480 flags: 0xa
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 22: 576x432 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 23: 512x384 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 24: 512x384 flags: 0x2a
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 25: 512x384 flags: 0x2a
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 26: 416x312 flags: 0x2a
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 27: 400x300 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 28: 400x300 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 29: 400x300 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 30: 400x300 flags: 0x25
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 31: 320x240 flags: 0x2a
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 32: 320x240 flags: 0x2a
Oct 21 18:58:18.736: mks| XINFO XFree86 VidMode 33: 320x240 flags: 0x2a
Oct 21 18:58:18.736: mks| KHBKL: Unable to parse keystring at: ''
Oct 21 18:58:18.739: vcpu-0| APIC: version = 0x14, max LVT = 5
Oct 21 18:58:18.739: vcpu-0| APIC: LDR = 0x1000000, DFR = 0xffffffff
Oct 21 18:58:18.778: vcpu-0| guestCpuFeatures = 0x604001f8
Oct 21 18:58:18.883: vcpu-0| VNET: Notification enabled for Ethernet0
Oct 21 18:58:18.884: vcpu-0| CDROM: Connecting ide1:0 to '/dev/hda'. img=0 raw=1 remote=0
Oct 21 18:58:18.886: vcpu-0| CDROM-LIN:  Implementing mediaChange workaround.
Oct 21 18:58:18.887: vcpu-0| CDROM-LIN:  SEND PACKET API Heuristic active.
Oct 21 18:58:18.887: vcpu-0| CDROM-LIN:  Using SG_IO ioctl for pass-through.
Oct 21 18:58:18.888: vcpu-0| Transitioned vmx/execState/val to poweredOn
Oct 21 18:58:18.929: vcpu-0| sz=2996176
Oct 21 18:58:18.934: vcpu-0| vmm32 initialized: Releasebuild-185404. cflags: 0x00000002.00000280.03418080.00002800
Oct 21 18:58:18.934: vcpu-0| Restoring VMM
Oct 21 18:58:18.934: vcpu-0| Cpt monModules(4).
Oct 21 18:58:18.950: vcpu-0| Done Cpt monModules(4).
Oct 21 18:58:18.950: vmx| CPT: monitor ACKing mode 4
Oct 21 18:58:18.951: vmx| WORKER: Creating new group with numThreads=1 (6)
Oct 21 18:58:18.951: vcpu-0| Sync monModules(5).
Oct 21 18:58:18.951: vcpu-0| Done Sync monModules(5).
Oct 21 18:58:18.951: vmx| CPT: monitor ACKing mode 5
Oct 21 18:58:18.952: Worker#0| MMC: Entering MM LazySave Loop
Oct 21 18:58:18.952: Worker#0| MMC: Exit MM Lazy Loop
Oct 21 18:58:18.953: vmx| USBG: CONNREQ: Dequeued head request after 226 ms for [name:Ultima\ USB\ Device vid:05d8 pid:4002 path:5/0 speed:full family:vendor]
Oct 21 18:58:18.955: vmx| USB: Automatically connecting virtual hub
Oct 21 18:58:18.955: vmx| USB: Connecting device 0x200000010e0f0002
Oct 21 18:58:18.969: vmx| MMC: Finished pending checkpoint op
Oct 21 18:58:18.969: vmx| DnDRegisterRpc: DnD rpc already set to 1
Oct 21 18:58:18.969: vmx| CopyPasteRegisterRpc: already set to 1
Oct 21 18:58:18.969: vmx| USB: Device [name:Ultima\ USB\ Device vid:05d8 pid:4002 path:5/0 speed:full family:vendor] should already be connected
Oct 21 18:58:18.969: vmx| VMXVmdbLoadUsbDevices: New set of 1 USB devices
Oct 21 18:58:18.969: vmx| USB: Found device [name:Ultima\ USB\ Device vid:05d8 pid:4002 path:5/0 speed:full family:vendor]
Oct 21 18:58:19.020: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000)
Oct 21 18:58:19.025: vcpu-0| MonitorInitNumaUnmapVMM32
Oct 21 18:58:19.496: mks| KHBKL: Unable to parse keystring at: ' '
Oct 21 18:58:24.444: mks| SVGA: display status changed, using optimizations for local consoles.
Oct 21 19:08:14.106: vmx| TOOLS setting the tools version to '0'
Oct 21 19:37:29.197: vmx| ide0:0: Command WRITE(10) took 1.828 seconds (ok)
Oct 21 19:45:08.154: vmx| ide0:0: Command READ(10) took 1.233 seconds (ok)
Oct 21 19:46:23.016: vmx| ide0:0: Command WRITE(10) took 1.255 seconds (ok)
Oct 21 19:49:23.931: vmx| ide0:0: Command WRITE(10) took 1.113 seconds (ok)
Oct 21 19:49:57.813: vmx| ide0:0: Command READ(10) took 1.722 seconds (ok)
Oct 21 19:53:50.327: vmx| VMXVmdbCbVmVmxExecState: Exec state change requested to state suspended without reset
Oct 21 19:53:50.327: vmx| CPT current = 0, requesting 1
Oct 21 19:53:50.327: vcpu-0| Sync monModules(1).
Oct 21 19:53:50.328: vcpu-0| Done Sync monModules(1).
Oct 21 19:53:50.328: vmx| CPT: monitor ACKing mode 1
Oct 21 19:53:50.433: vmx| USB: Disconnecting device 0x5000205d84002
Oct 21 19:53:50.433: vmx| USBGL: RELEASEINTERFACE=0 failed -1:22:Invalid argument
Oct 21 19:53:50.433: vmx| USB: Disconnecting device 0x200000010e0f0002
Oct 21 19:53:50.433: vmx| CPT current = 1, requesting 2
Oct 21 19:53:50.433: vmx| CPT: monitor ACKing mode 2
Oct 21 19:53:50.433: vmx| CPT current = 2, requesting 3
Oct 21 19:53:50.461: vcpu-0| Cpt monModules(3).
Oct 21 19:53:50.461: vcpu-0| Done Cpt monModules(3).
Oct 21 19:53:50.461: vmx| CPT: monitor ACKing mode 3
Oct 21 19:53:50.461: vmx| DUMPER: Modifying checkpoint file ./Gentoo10.vmss
Oct 21 19:53:50.461: vmx| Checkpointed in VMware Workstation, 6.5.3 build-185404, build-185404, Linux Host
Oct 21 19:53:50.470: vmx| BusMemSample: checkpoint 3 initPercent 35 touched 96993
Oct 21 19:54:41.137: vmx| Stopping VCPU threads...
Oct 21 19:54:42.995: mks| Detaching from window system.
Oct 21 19:54:42.997: mks| Async MKS thread is exiting
Oct 21 19:54:42.997: vmx| TOOLS received request in VMX to set option 'enableDnD' -> '0'
Oct 21 19:54:42.997: vmx| TOOLS received request in VMX to set option 'copypaste' -> '0'
Oct 21 19:54:42.997: vmx| TOOLS received request in VMX to set option 'copypaste' -> '0'
Oct 21 19:54:43.006: vmx| MKS local poweroff
Oct 21 19:54:43.007: vmx| WORKER: asyncOps=33357 maxActiveOps=4 maxPending=5 maxCompleted=6
Oct 21 19:54:43.057: vmx| Transitioned vmx/execState/val to suspended
Oct 21 19:54:43.407: vmx| vmdbPipe_Streams Couldn't read: OVL_STATUS_EOF
Oct 21 19:54:43.407: vmx| VMX idle exit
Oct 21 19:54:43.410: vmx| Flushing VMX VMDB connections
Oct 21 19:54:43.410: vmx| IPC_exit: disconnecting all threads
Oct 21 19:54:43.410: vmx| VMX exit (0).
Oct 21 19:54:43.410: vmx| AIOMGR-S : stat o=3 r=9 w=0 i=0 br=38400 bw=0


Ich hoffe, daraus ist etwas für Kenner herauszulesen :-)

Gruss
Manfred

Member
Beiträge: 149
Registriert: 06.06.2006, 08:12

Beitragvon ManfredB » 22.10.2009, 05:18

Und hier noch die vmx-Datei:

Code: Alles auswählen

## http://vmmanager.sourceforge.net
.encoding = "UTF-8"
config.version = "8"
virtualHW.version = "4"
scsi0.present = "TRUE"
memsize = "1024"
ide0:0.present = "TRUE"
ide0:0.fileName = "Gentoo10-sparse.vmdk"
ide1:0.present = "TRUE"
ide1:0.fileName = "/dev/hda"
ide1:0.deviceType = "cdrom-raw"
floppy0.fileName = "disabled"
floppy0.present = "FALSE"
floppy0.fileType = "device"
usb.present = "TRUE"
sound.present = "TRUE"
sound.virtualDev = "es1371"
displayName = "Gentoo10"
guestOS = "linux"
serial0.present = "FALSE"
serial0.fileName = "COM1"
serial1.present = "FALSE"
serial1.fileName = "COM2"
parallel0.present = "FALSE"
parallel0.fileName = "LPT1"
parallel0.bidirectional = "FALSE"
ethernet0.present = "TRUE"
ethernet0.connectionType = "bridged"
nvram = "linux.nvram"

extendedConfigFile = "Gentoo10.vmxf"

virtualHW.productCompatibility = "hosted"
tools.upgrade.policy = "manual"

checkpoint.vmState = ""
ethernet0.addressType = "generated"
tools.syncTime = "FALSE"
uuid.location = "56 4d 3e ac c0 a1 29 e6-f5 18 ee a6 d0 33 c7 b0"
uuid.bios = "56 4d 3e ac c0 a1 29 e6-f5 18 ee a6 d0 33 c7 b0"
ide0:0.redo = ""
usb.autoConnect.device0 = "path:5/0 autoclean:1"
vmotion.checkpointFBSize = "16777216"
ethernet0.generatedAddress = "00:0c:29:33:c7:b0"
ethernet0.generatedAddressOffset = "0"

debugStub.linuxOffsets = "0x0,0xffffffff,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0"

vmx.onpoweronkeys = "1"
vmx.onpoweron0.key = "memsize"
vmx.onpoweron0.value = "1104"


Gruss
Manfred


Zurück zu „VMware Player“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast